TE Connectivity 5-146292-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5-146292-6 is a vertical connector header with 6 positions at 2.54mm pitch, designed for through-hole mounting in board-to-board or cable applications. This component features male pins with gold-plated mating contacts and tin-plated posts, housed in a liquid crystal polymer (LCP) insulation body rated UL94 V-0. The part operates across a temperature range of -65°C to 105°C with a current rating of 3A per contact.

The 5-146292-6 carries an obsolete product status within the AMPMODU Mod II series. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this connector specification.

Key Parameters

Parameter	Value
Connector Type	Header, Breakaway
Contact Type	Male Pin
Number of Positions	6
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Press-Fit, Solder
Contact Finish - Mating	Gold
Contact Finish - Post	Tin
Current Rating	3A
Operating Temperature	-65°C ~ 105°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the 5-146292-6 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

Number of positions: 6
Pitch - mating: 0.100" (2.54mm)
Contact type: Male pin
Mounting type: Through hole
Contact finish - mating: Gold
Current rating: 3A per contact
Material flammability rating: UL94 V-0
Moisture sensitivity level: 1 (Unlimited)

Secondary Compatibility Factors:

Connector type: Header or Header, Breakaway
Termination: Solder (primary); Press-Fit acceptable
Operating temperature range: Minimum -65°C to 105°C
Contact material: Copper alloy or phosphor bronze
Insulation material: LCP, PBT, or thermoplastic variants

Substitute parts are grouped into two categories: direct equivalents from TE Connectivity with active product status, and functionally compatible alternatives from other manufacturers meeting all critical electrical and mechanical parameters.

Parameter Comparison

Parameter	5-146292-6 (Main)	5-146280-6	2306-6111-TG	77311-103-06LF	PBC06SAAN	PBC06SABN	PBC06SACN	PBC06SADN	PBC06SAEN	PBC06SAFN	PBC06SAGN
Manufacturer	TE Connectivity	TE Connectivity	3M	Amphenol ICC (FCI)	Sullins	Sullins	Sullins	Sullins	Sullins	Sullins	Sullins
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Number of Positions	6	6	6	6	6	6	6	6	6	6	6
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Finish - Mating	Gold	Gold	Gold	Gold or Gold, GXT™	Gold	Gold	Gold	Gold	Gold	Gold	Gold
Contact Finish - Post	Tin	Tin	Tin-Lead	Tin	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Current Rating (Amps)	3A	3A	3A	3A per Contact	3A	3A	3A	3A	3A	3A	3A
Operating Temperature	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 105°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS Compliant	ROHS3 Compliant	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	Not Applicable	Not Applicable	Not Applicable	Not Applicable	Not Applicable	Not Applicable	Not Applicable
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.200" (5.08mm)	0.120" (3.05mm)	0.230" (5.84mm)	0.320" (8.13mm)	0.420" (10.67mm)	0.520" (13.21mm)	0.620" (15.75mm)	0.720" (18.29mm)
Insulation Height	0.090" (2.29mm)	0.090" (2.29mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)

Engineering Selection Recommendations

Tier 1: Direct Equivalent (Recommended Primary Substitute)

The TE Connectivity 5-146280-6 is the optimal substitute for the obsolete 5-146292-6. Both components share identical electrical and mechanical specifications within the AMPMODU Mod II series. The 5-146280-6 maintains active product status, ROHS3 compliance, and identical pitch, position count, current rating, and operating temperature range. The primary difference is termination specification: the 5-146280-6 features solder termination only, whereas the original part supports both press-fit and solder termination. For applications requiring solder-only assembly, this substitution presents no functional limitation.

Tier 2: Cross-Manufacturer Alternatives (Active Status)

The Amphenol ICC 77311-103-06LF (BERGSTIK® series) and Sullins Connector Solutions PBC06 series variants (PBC06SAAN, PBC06SABN, PBC06SACN, PBC06SADN, PBC06SAEN, PBC06SAFN, PBC06SAGN) satisfy all critical electrical parameters and maintain active product status with RoHS compliance. These alternatives feature extended operating temperature ranges (-65°C to 125°C) and phosphor bronze contact material, providing enhanced thermal performance. The Sullins PBC06 series offers variable contact post lengths to accommodate different PCB thicknesses and assembly requirements.

Tier 3: Alternative with Compliance Considerations

The 3M 2306-6111-TG meets all electrical and mechanical requirements but carries RoHS non-compliant status with REACH-affected designation. This part is suitable only for applications without RoHS or REACH regulatory requirements.

Selection Criteria by Application:

RoHS-regulated applications: Select 5-146280-6, 77311-103-06LF, or any Sullins PBC06 variant
Extended temperature operation: Select 77311-103-06LF or Sullins PBC06 series
Variable PCB thickness accommodation: Select appropriate Sullins PBC06 variant based on required post length
Direct form-fit-function replacement: Select 5-146280-6

Frequently Asked Questions (FAQ)

Q: Can the 5-146280-6 directly replace the 5-146292-6 in existing designs?

A: Yes. The 5-146280-6 is functionally equivalent with identical pitch (2.54mm), position count (6), current rating (3A), operating temperature range (-65°C to 105°C), and contact finish specifications. The termination difference (solder-only versus press-fit and solder) does not affect compatibility for solder-based assembly processes.

Q: What is the primary difference between TE Connectivity 5-146280-6 and the Sullins PBC06 series?

A: The 5-146280-6 maintains TE Connectivity's AMPMODU Mod II series specifications with fixed contact post length of 0.120" (3.05mm). The Sullins PBC06 series offers multiple post length variants (ranging from 0.120" to 0.720") to accommodate different PCB thicknesses and assembly depths. Both meet identical electrical specifications and RoHS compliance requirements.

Q: Are the Sullins PBC06SAAN, PBC06SABN, PBC06SACN variants interchangeable?

A: These variants are electrically and mechanically interchangeable in terms of mating interface and electrical performance. The designator suffix indicates contact post length: SAAN (0.120"), SABN (0.230"), SACN (0.320"), SADN (0.420"), SAEN (0.520"), SAFN (0.620"), SAGN (0.720"). Selection depends on required PCB mounting depth and assembly clearance requirements.

Q: Why does the 3M 2306-6111-TG show RoHS non-compliant status?

A: The 3M 2306-6111-TG features tin-lead contact finish on the post, which contains lead and does not meet RoHS directive restrictions. This part is suitable only for applications without RoHS regulatory requirements or for legacy system maintenance where RoHS compliance is not mandated.

Q: What is the significance of the operating temperature range difference between 5-146292-6 (-65°C to 105°C) and the Sullins PBC06 series (-65°C to 125°C)?

A: The Sullins PBC06 series supports an extended upper temperature limit of 125°C compared to the original part's 105°C maximum. This extended range provides additional thermal margin for high-temperature applications. For applications operating within the original -65°C to 105°C specification, both parts are functionally equivalent.

Q: How does contact material (copper alloy versus phosphor bronze) affect substitution compatibility?

A: Both copper alloy and phosphor bronze contact materials meet the electrical and mechanical requirements for this connector category. Phosphor bronze, used in the Sullins and Amphenol ICC alternatives, provides enhanced spring characteristics and wear resistance. For standard applications, both materials are functionally equivalent.

Q: Is the Amphenol ICC 77311-103-06LF suitable for applications requiring press-fit termination?

A: The 77311-103-06LF features solder termination only and does not support press-fit assembly. For applications requiring press-fit capability, select the TE Connectivity 5-146292-6 (if available from inventory) or confirm solder-only assembly compatibility before substitution.

Q: What packaging differences exist among the substitute parts?

A: The 5-146280-6 is supplied in bulk packaging. The 3M 2306-6111-TG is supplied in bulk packaging. The Amphenol ICC 77311-103-06LF is supplied in bag packaging. The Sullins PBC06 series is supplied in bulk packaging. Packaging differences do not affect electrical or mechanical compatibility; selection depends on procurement and inventory management requirements.

Q: Are all substitute parts compliant with REACH regulations?

A: The TE Connectivity 5-146280-6 and Sullins PBC06 series are REACH Unaffected. The Amphenol ICC 77311-103-06LF and 3M 2306-6111-TG are REACH Affected. For applications requiring REACH compliance, select 5-146280-6 or any Sullins PBC06 variant.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message