TE Connectivity 5-1393222-1 General Purpose Relay SPST 24VDC Equivalent & Substitute Parts

Part Overview

The TE Connectivity Potter & Brumfield Relays model 5-1393222-1 is a general purpose relay with SPST-NO (1 Form A) contact configuration, rated for 8A at 24VDC coil voltage. This relay features through-hole mounting with PC pin termination and is sealed for fully protected operation across an operating temperature range of -40°C to 85°C.

The 5-1393222-1 is classified as obsolete. Equivalent and substitute parts are available from the same manufacturer in active product status, offering direct functional replacement with maintained electrical and mechanical compatibility.

Substiute Parts

5-1393222-1

TE Connectivity Potter & Brumfield RelaysIn Stock: 9905-1393222-1 Datasheet

Current PartRFQ

5-1416200-8

TE Connectivity Potter & Brumfield RelaysIn Stock: 9745-1416200-8 Datasheet

SimilarRFQ

V23061A1007A302

TE Connectivity Potter & Brumfield RelaysIn Stock: 2003V23061A1007A302 Datasheet

SimilarRFQ

V23061A1007A502

TE Connectivity Potter & Brumfield RelaysIn Stock: 2122V23061A1007A502 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 5-1393222-1 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Coil Voltage: 24VDC
• Contact Form: SPST-NO (1 Form A)
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Coil Current: 10.6 mA
• Must Operate Voltage: 16.3 VDC
• Must Release Voltage: 2.4 VDC
• Operate Time: 10 ms
• Release Time: 5 ms
• Operating Temperature Range: -40°C ~ 85°C
• Coil Resistance: 2.27 kOhms

Allowable Variation Parameters:

• Contact Rating (Current): 8A minimum (higher ratings are acceptable)
• Switching Voltage: 400VAC maximum (equal or higher acceptable)
• Seal Rating: Sealed configurations acceptable
• Contact Material: Silver-based compositions acceptable
• Coil Insulation: Class A or higher acceptable
• Product Status: Active status preferred for obsolete parts

Three substitute parts meet these criteria and are available from TE Connectivity Potter & Brumfield Relays.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred):

V23061A1007A302 and V23061A1007A502 are direct parametric equivalents to the 5-1393222-1. Both parts maintain identical electrical specifications, contact material composition (Silver Nickel), and seal rating (Sealed - Fully). Both are available in active product status with RoHS3 compliance and REACH unaffected designation. These parts are supplied in tube packaging and offer the highest inventory availability (1949 and 2100 units respectively).

For Enhanced Current Rating:

5-1416200-8 provides a higher contact current rating of 10A compared to the 8A specification of the main part, while maintaining all other critical electrical parameters. This part operates under the V23061 and AXICOM series designation and features Class F coil insulation (superior to Class A). The 5-1416200-8 is supplied in bulk packaging and is RoHS3 compliant with REACH unaffected status. This option is suitable for applications requiring additional current margin.

All three substitute parts are manufactured by TE Connectivity Potter & Brumfield Relays and maintain the same coil voltage, contact form, mounting configuration, and timing specifications as the obsolete 5-1393222-1.

Frequently Asked Questions (FAQ)

Q: Can the 5-1416200-8 be used as a direct replacement for the 5-1393222-1?

A: Yes. The 5-1416200-8 meets all mandatory electrical parameters including coil voltage, contact form, coil current, timing specifications, and operating temperature range. The higher contact current rating of 10A exceeds the 8A requirement and does not create compatibility issues. The Class F coil insulation provides enhanced thermal performance compared to Class A.

Q: What is the difference between V23061A1007A302 and V23061A1007A502?

A: Both parts are parametric equivalents with identical electrical specifications. The primary difference is contact material composition: V23061A1007A302 uses Silver Tin Oxide (AgSnO) while V23061A1007A502 uses Silver Nickel (AgNi). The 5-1393222-1 uses Silver Nickel, making V23061A1007A502 the closest material match. Both parts are available in active status with equivalent inventory levels.

Q: Are there packaging differences between the substitute parts?

A: Yes. V23061A1007A302 and V23061A1007A502 are supplied in tube packaging, while 5-1416200-8 is supplied in bulk packaging. The tube packaging is standard for component handling and storage. Packaging selection should align with assembly process requirements and inventory management practices.

Q: Do all substitute parts meet current compliance standards?

A: V23061A1007A302 and V23061A1007A502 are RoHS3 compliant and REACH unaffected. The 5-1416200-8 is also RoHS3 compliant and REACH unaffected. All parts carry EAR99 export classification. The obsolete 5-1393222-1 does not carry RoHS or REACH designations.

Q: Can the substitute parts handle the same switching voltage as the original?

A: Yes. All substitute parts are rated for 400VAC maximum switching voltage, identical to the 5-1393222-1 specification.

Q: What is the inventory status of each substitute part?

A: V23061A1007A502 has the highest availability at 2100 units, followed by V23061A1007A302 at 1949 units, and 5-1416200-8 at 911 units. All parts are listed as new original stock.