#, ##) 5. Use pure HTML <table> syntax for all tables 6. Exclude horizontal rules, concluding statements, and sales language 7. Follow the exact output structure you specified 8. Ensure SEO-friendliness through natural inclusion of part numbers and category keywords 9. Make it ready for direct paste into a web Markdown editor

Here's the generated page:

512-BULK Equivalent & Substitute Parts

Part Overview

The 512-BULK is a Terminal Twist On Wire Cap with Wing Connector configuration, designed for 8-20 AWG copper wire termination. Manufactured by 3M, this component features full insulation, flame retardant properties, and is classified as Obsolete. Due to its obsolete product status, identifying active equivalent parts is necessary for continued component sourcing and system maintenance.

Substiute Parts

512-BULK

3MIn Stock: 933512-BULK Datasheet

Current PartRFQ

SG-R BAG

3MIn Stock: 5293SG-R BAG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The SG-R BAG has been identified as a manufacturer-recommended substitute for the 512-BULK. Substitution eligibility is determined by the following critical parameters:

• Terminal Type: Both parts are Twist On Wire Cap, Wing connectors
• Termination Method: Both use Twist On termination
• Insulation: Both are Fully Insulated
• Wire Material: Both accept Copper Wire Only
• Color: Both are Red
• Wire Gauge Compatibility: 512-BULK supports 8-20 AWG; SG-R BAG supports 8-18 AWG (overlapping range 8-18 AWG)
• MSL Rating: Both rated MSL 1 (Unlimited)

The SG-R BAG operates within the functional parameters of the 512-BULK for wire gauges 8-18 AWG. Applications requiring 19-20 AWG termination cannot use this substitute.

Parameter Comparison

Engineering Selection Recommendations

The SG-R BAG is an active product manufactured by 3M and holds ROHS3 Compliance and REACH Unaffected status. As the 512-BULK is obsolete, the SG-R BAG provides continuity for applications within the 8-18 AWG wire gauge range. Both parts share identical ECCN and HTSUS classifications, confirming regulatory equivalence. The SG-R BAG is available in bulk packaging with 5208 units in stock, supporting production requirements.

Frequently Asked Questions (FAQ)

Q: Can the SG-R BAG replace the 512-BULK in all applications?

A: The SG-R BAG is suitable for applications using wire gauges 8-18 AWG. Applications requiring 19-20 AWG termination cannot use this substitute, as the SG-R BAG maximum wire gauge is 18 AWG.

Q: What is the difference in wire gauge range between these parts?

A: The 512-BULK supports 8-20 AWG, while the SG-R BAG supports 8-18 AWG. The overlap is 8-18 AWG, where substitution is valid.

Q: Are there compliance differences between the two parts?

A: Both parts share the same ECCN (EAR99) and HTSUS code (8546.90.0000). The SG-R BAG holds ROHS3 Compliance and REACH Unaffected status. The 512-BULK is obsolete and no longer actively supported.

Q: What packaging options are available for the SG-R BAG?

A: The SG-R BAG is supplied in Bulk packaging with current inventory of 5208 units.

Q: Are the termination methods identical?

A: Yes, both the 512-BULK and SG-R BAG use Twist On termination with Wing Connector configuration for identical installation procedures.