TE Connectivity AMP Connectors 5084613-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5084613-5 is a 120 Position Connector Receptacle with outer shroud contacts designed for surface mount applications. This rectangular connector features gold-plated contacts and is part of the Free Height (FH) series. The component is currently Active in product status with 684 pieces available in new original inventory.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across connector specifications. Alternative part numbers may be required due to inventory availability, supply chain considerations, or specific procurement requirements while maintaining full functional compatibility.

Substiute Parts

5084613-5

TE Connectivity AMP ConnectorsIn Stock: 7065084613-5 Datasheet

Current PartRFQ

5-5179232-5

TE Connectivity AMP ConnectorsIn Stock: 7355-5179232-5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular connectors in this category is determined by strict equivalence across the following critical parameters:

Position Count and Pitch: The 120-position configuration at 0.031" (0.80mm) pitch defines the connector's mating interface and PCB footprint. Any substitute must maintain identical position count and pitch specifications.

Connector Geometry: The 2-row configuration, receptacle type with outer shroud contacts, mated stacking height of 9mm, and height above board of 0.305" (7.75mm) establish the physical form factor. These dimensions must be identical for mechanical compatibility.

Contact Specifications: Gold plating at 30.0µin (0.76µm) thickness defines the electrical interface characteristics. This finish specification must be maintained.

Mounting Technology: Surface mount mounting type and board guide features must be preserved for assembly compatibility.

Compliance Requirements: RoHS compliance status and Moisture Sensitivity Level (MSL) 1 rating establish the environmental and regulatory baseline for substitution.

The substitute part 5-5179232-5 maintains equivalence across all these critical parameters, establishing it as a parametric equivalent within the Free Height (FH) series.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (5084613-5): This part maintains Active product status with RoHS Compliant certification and represents the baseline specification. Current inventory of 684 pieces supports immediate procurement requirements.

Substitute Selection (5-5179232-5): This part is fully equivalent across all electrical and mechanical parameters. The RoHS3 Compliant status represents an updated compliance certification that maintains regulatory equivalence with the original RoHS Compliant specification. Both parts are Active in product status. Current inventory of 668 pieces is available for procurement.

Compliance Equivalence: Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, confirming regulatory and trade compliance alignment. The MSL 1 (Unlimited) rating on both parts indicates no moisture sensitivity constraints during storage or handling.

Selection Basis: Component selection between these parts should be based on procurement availability, supply chain lead times, and inventory status rather than technical performance differences, as all functional and mechanical specifications are identical.

Frequently Asked Questions (FAQ)

Q: Can 5-5179232-5 be used as a direct replacement for 5084613-5 in existing designs?

A: Yes. Both parts maintain identical electrical and mechanical specifications across all critical parameters including position count, pitch, connector geometry, contact finish, and mounting characteristics. No design modifications are required for substitution.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant designations?

A: Both designations confirm compliance with Restriction of Hazardous Substances regulations. ROHS3 represents an updated certification standard. For the purposes of component substitution, both certifications establish equivalent regulatory compliance for this product category.

Q: Are the PCB footprints identical between these two parts?

A: Yes. Both parts share identical specifications for number of positions (120), pitch (0.031"/0.80mm), number of rows (2), and height above board (0.305"/7.75mm). PCB footprints are directly interchangeable.

Q: Do both parts have the same contact finish specifications?

A: Yes. Both parts feature gold-plated contacts with identical finish thickness of 30.0µin (0.76µm), ensuring equivalent electrical interface characteristics.

Q: What is the significance of the Board Guide feature?

A: The Board Guide feature is present on both parts and provides mechanical alignment and stability during surface mount assembly. This feature is identical across both components.

Q: Are there any differences in moisture sensitivity between these parts?

A: No. Both parts carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity constraints. Storage and handling requirements are identical.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since all electrical, mechanical, and compliance specifications are identical, both parts can be used interchangeably within the same assembly or production environment.

Q: What is the mated stacking height, and is it the same for both parts?

A: The mated stacking height is 9mm for both parts. This specification defines the connector height when mated with its corresponding plug connector and is identical across both components.