Equivalent & Substitute Parts for 505MABA01KJM Film Capacitor

Part Overview

The 505MABA01KJM is a 5 µF film capacitor manufactured by Cornell Dubilier / Illinois Capacitor, rated for 800V DC operation with polypropylene metallized dielectric construction. This component is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing applications in motor run circuits and similar high-voltage DC filtering applications.

The radial through-hole configuration with PC pin termination and ±10% capacitance tolerance establishes the baseline for substitute part selection. Due to the obsolete status of the original part, equivalent alternatives from active manufacturers are required to maintain supply chain continuity.

Key Parameters

Parameter	Value	Unit	Significance for Substitution
Capacitance	5	µF	Primary electrical specification; must match exactly
Voltage Rating - DC	800	V	Critical for circuit safety; substitutes must meet or exceed this rating
Voltage Rating - AC	400	V	Applicable for AC component of voltage stress
Tolerance	±10	%	Acceptable variance in capacitance value
Dielectric Material	Polypropylene (PP), Metallized	—	Determines electrical characteristics and temperature stability
Mounting Type	Through Hole	—	PCB assembly compatibility
Package / Case	Radial	—	Physical form factor for board layout
Lead Spacing	37.50	mm	PCB footprint compatibility
Operating Temperature Range	-40 to 100	°C	Environmental operating limits
Termination	PC Pins	—	Connection method to PCB
RoHS Status	ROHS3 Compliant	—	Regulatory compliance requirement

Substitute Part Grouping Explanation

Substitute parts for the 505MABA01KJM are categorized into two groups based on substitution criteria:

Group 1: Parametric Equivalents (Direct Replacements)

Parametric equivalent parts maintain identical electrical specifications and physical form factors. These parts satisfy all critical parameters: 5 µF capacitance, 800V DC voltage rating, ±10% tolerance, polypropylene metallized dielectric, radial through-hole mounting, 37.50 mm lead spacing, and -40°C to 100°C operating temperature range. Parametric equivalents from Nichicon (MABA014500KJL and MABA014500KJS) are active products suitable for direct substitution in motor run applications.

Group 2: Functional Substitutes (Voltage-Rated Alternatives)

Functional substitutes maintain the core capacitance value (5 µF), mounting configuration (radial through-hole), and lead spacing (37.50 mm) but differ in voltage rating, tolerance, or temperature range. These parts are selected based on application compatibility where higher voltage ratings or improved performance characteristics are acceptable:

Higher DC Voltage Rating Substitutes: Parts rated for 1100V DC (B32776T0505K000, EZP-V1B505LTB, EZP-V1B505LTT) provide enhanced voltage margin for circuits with transient overvoltage conditions or future design upgrades.
AC Voltage Rated Substitutes: Parts rated for 330V AC or 380V AC (EZP-Q33505LTA, EZP-Q38505LTA) are applicable where AC voltage stress is the primary operating condition, with tighter ±5% tolerance specifications.

Parameter Comparison

Part Number	Manufacturer	Capacitance (µF)	Voltage DC (V)	Voltage AC (V)	Tolerance (%)	Dielectric	Package	Lead Spacing (mm)	Temp Range (°C)	Product Status	ESR (mOhms)
505MABA01KJM	Cornell Dubilier / Illinois Capacitor	5	800	400	±10	PP Metallized	Radial	37.50	-40 to 100	Obsolete	—
MABA014500KJL	Nichicon	5	800	400	±10	PP Metallized	Radial	37.50	-40 to 100	Active	—
MABA014500KJS	Nichicon	5	800	400	±10	PP Metallized	Radial	37.50	-40 to 100	Active	—
B32776T0505K000	EPCOS - TDK Electronics	5	1100	—	±10	PP Metallized	Radial	37.50	-40 to 105	Active	23.6
EZP-Q33505LTA	Panasonic Electronic Components	5	—	330	±5	PP Metallized	Radial	37.50	-40 to 105	Active	15.2
EZP-Q38505LTA	Panasonic Electronic Components	5	—	380	±5	PP Metallized	Radial	37.50	-40 to 105	Active	15.1
EZP-V1B505LTB	Panasonic Electronic Components	5	1100	—	±10	PP Metallized	Radial	37.50	-40 to 105	Active	20.4
EZP-V1B505LTT	Panasonic Electronic Components	5	1100	—	±10	PP Metallized	Radial	37.50	-40 to 105	Active	20.4

Engineering Selection Recommendations

For Direct Replacement in Motor Run Applications:

Select MABA014500KJL or MABA014500KJS from Nichicon. Both parts are active products in the MAB series with identical electrical and mechanical specifications to the obsolete 505MABA01KJM. These parts maintain the 5 µF capacitance, 800V DC / 400V AC voltage ratings, ±10% tolerance, and -40°C to 100°C operating temperature range. Both are ROHS3 compliant and suitable for immediate substitution without circuit redesign.

For Enhanced Voltage Margin Applications:

Select B32776T0505K000 (EPCOS - TDK Electronics), EZP-V1B505LTB, or EZP-V1B505LTT (Panasonic Electronic Components) where 1100V DC rating is acceptable. These parts provide 37.5% higher voltage headroom than the original specification. The EPCOS part offers extended temperature range to 105°C and lower ESR (23.6 mOhms). Panasonic parts include AEC-Q200 automotive qualification and are rated for DC Link and DC Filtering applications with 20.4 mOhms ESR.

For AC-Dominant Voltage Stress Circuits:

Select EZP-Q33505LTA (330V AC) or EZP-Q38505LTA (380V AC) from Panasonic where the circuit operates primarily under AC voltage conditions. These parts feature tighter ±5% tolerance, lower ESR (15.1-15.2 mOhms), and extended temperature range to 105°C. Lead spacing and radial package remain compatible with original PCB layouts.

All recommended substitutes are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

Frequently Asked Questions (FAQ)

Q1: Can MABA014500KJL or MABA014500KJS be used as direct replacements for 505MABA01KJM?

Yes. Both Nichicon parts are parametric equivalents with identical capacitance (5 µF), voltage ratings (800V DC / 400V AC), tolerance (±10%), dielectric material (polypropylene metallized), mounting type (radial through-hole), lead spacing (37.50 mm), and operating temperature range (-40°C to 100°C). No circuit modifications are required.

Q2: What is the difference between the two Nichicon parametric equivalents (MABA014500KJL and MABA014500KJS)?

Both parts are functionally identical with the same electrical and mechanical specifications. The difference lies in packaging designation or internal manufacturing variant. Either part is suitable for substitution; selection may depend on supplier availability or internal part numbering systems.

Q3: Why would I select a 1100V DC rated part instead of the 800V DC original specification?

Higher voltage-rated parts (B32776T0505K000, EZP-V1B505LTB, EZP-V1B505LTT) provide additional safety margin against transient overvoltage events, voltage spikes, or future circuit upgrades. The 37.5% voltage increase does not affect normal circuit operation at 800V DC but extends component life and reliability in harsh electrical environments.

Q4: Are the Panasonic AC-rated parts (EZP-Q33505LTA, EZP-Q38505LTA) suitable for DC applications?

No. These parts are rated for AC voltage stress (330V AC or 380V AC) and lack DC voltage specifications. They are applicable only in circuits where AC voltage is the primary stress condition. For DC or mixed AC/DC applications, select parts with explicit DC voltage ratings.

Q5: What does the ±5% tolerance specification mean compared to ±10%?

Tolerance defines the acceptable variance in actual capacitance value from the nominal 5 µF specification. ±5% tolerance (EZP-Q33505LTA, EZP-Q38505LTA) restricts capacitance to 4.75-5.25 µF, while ±10% tolerance (505MABA01KJM, Nichicon equivalents, 1100V parts) allows 4.5-5.5 µF. Tighter tolerance is beneficial in precision filtering circuits; standard ±10% is acceptable for motor run and general DC filtering applications.

Q6: Are all substitute parts ROHS3 compliant?

Yes. All recommended substitute parts carry ROHS3 compliance certification, meeting current environmental and hazardous substance restrictions. The original 505MABA01KJM is also ROHS3 compliant.

Q7: What is ESR (Equivalent Series Resistance) and why does it vary among substitutes?

ESR represents the internal resistance of the capacitor at operating frequency, affecting ripple current handling and heat generation. Lower ESR values (15.1-15.2 mOhms for Panasonic AC-rated parts) indicate better high-frequency performance and lower power dissipation. Higher ESR values (20.4-23.6 mOhms for 1100V parts) are typical for higher voltage-rated designs. For motor run applications, ESR differences are not critical; selection based on voltage rating and availability is appropriate.

Q8: Can I use parts with different lead spacing?

No. All recommended substitutes maintain the 37.50 mm lead spacing to ensure PCB footprint compatibility. Parts with different lead spacing would require PCB redesign and are not suitable substitutes.

Q9: What is the significance of AEC-Q200 rating on Panasonic parts?

AEC-Q200 is an automotive qualification standard indicating the part meets stringent reliability and performance requirements for automotive applications. This certification is beneficial for high-reliability applications but is not required for standard motor run circuits. Its presence indicates enhanced quality assurance.

Q10: Should I stock multiple substitute part numbers or select one primary alternative?

For supply chain resilience, maintain availability of at least two substitute options. MABA014500KJL or MABA014500KJS (Nichicon) serve as primary direct replacements. B32776T0505K000 (EPCOS) or EZP-V1B505LTB (Panasonic) provide secondary alternatives with enhanced voltage ratings. This approach ensures continuity if a primary supplier experiences allocation constraints.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message