FLIR Lepton 500-0659-00 Equivalent & Substitute Parts

Part Overview

The FLIR Lepton 500-0659-00 is an 80×60 thermal image sensor classified as an optical sensor within the transducer category. This component is designated as obsolete and is no longer in active production. The part carries RoHS Compliant certification with MSL 1 (Unlimited) moisture sensitivity rating.

Due to its obsolete status, locating replacement units from original inventory becomes increasingly difficult. Identifying equivalent substitute parts ensures design continuity and maintains supply chain reliability for applications requiring thermal imaging sensor functionality.

Substiute Parts

500-0659-00

FLIR LeptonIn Stock: 1192500-0659-00 Datasheet

Current PartRFQ

500-0763-01

FLIR LeptonIn Stock: 1092500-0763-01 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FLIR Lepton 500-0659-00 is based on the following critical parameters:

Resolution Compatibility: The substitute part maintains the same 80×60 pixel resolution, ensuring optical performance equivalence for thermal imaging applications.

Manufacturer Continuity: Both the main part and substitute originate from FLIR Lepton, maintaining manufacturer-level compatibility and design consistency.

Compliance Alignment: The substitute part meets RoHS3 Compliant and REACH Unaffected standards, providing regulatory compliance suitable for replacement in existing designs.

Moisture Sensitivity: Both parts share MSL 1 (Unlimited) rating, indicating identical moisture handling and storage requirements.

Interface Specification: The substitute part utilizes SPI interface, a standard communication protocol for thermal sensor integration.

Pixel Geometry: The 17µm × 17µm pixel size in the substitute part maintains optical characteristics necessary for thermal imaging fidelity.

Parameter Comparison

Engineering Selection Recommendations

Active Production Status: The FLIR Lepton 500-0763-01 is designated as Active, providing assured availability and ongoing manufacturer support compared to the obsolete 500-0659-00.

Regulatory Compliance: The substitute part meets ROHS3 Compliant and REACH Unaffected certifications, exceeding the RoHS Compliant status of the original part and ensuring compliance with current environmental regulations.

Inventory Availability: The substitute part maintains 1035 units in new original stock, providing immediate procurement capability for design transitions and production requirements.

Series Designation: Classification within the Lepton® 2.5 series indicates the substitute part represents a current-generation thermal imaging sensor with established design documentation and application support.

Moisture Handling: Identical MSL 1 (Unlimited) rating ensures the substitute part requires no changes to storage, handling, or assembly processes established for the original component.

Frequently Asked Questions (FAQ)

Q: Can the FLIR Lepton 500-0763-01 directly replace the 500-0659-00 in existing designs?

A: The substitute part maintains identical 80×60 resolution and MSL 1 rating. Verification of interface compatibility and mechanical fit within the specific application is required, as the substitute is packaged as a Module in a Tray configuration.

Q: What is the primary difference between these two thermal image sensors?

A: The 500-0659-00 is obsolete with limited technical specifications provided. The 500-0763-01 is an active Lepton® 2.5 series component with documented specifications including 8.6 frames per second, integral shutter, SPI interface, and 17µm × 17µm pixel geometry.

Q: Are there compliance differences between the two parts?

A: The original part carries RoHS Compliant certification. The substitute part meets ROHS3 Compliant and REACH Unaffected standards, representing current regulatory compliance levels.

Q: What packaging format is used for the substitute part?

A: The FLIR Lepton 500-0763-01 is supplied as a Module in Tray packaging, differing from the unspecified packaging of the original part.

Q: Is the SPI interface standard for thermal image sensors in this category?

A: SPI (Serial Peripheral Interface) is a widely adopted communication protocol for thermal sensor integration. Confirmation of interface compatibility with existing circuit designs is necessary during component selection.

Q: What does MSL 1 (Unlimited) indicate for component handling?

A: MSL 1 (Unlimited) designates the lowest moisture sensitivity level, indicating the component requires no special moisture control during storage, handling, or assembly processes.