4MA200000Z4BACTGI8 Equivalent & Substitute Parts

Part Overview

The 4MA200000Z4BACTGI8 is a 200 MHz MEMS-based XO (Standard) oscillator manufactured by Renesas Electronics Corporation, featuring LVDS output, 2.5V supply voltage, and enable/disable functionality in a 6-SMD, No Lead surface mount package. This part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for continued system support and new designs.

Substiute Parts

4MA200000Z4BACTGI8

Renesas Electronics CorporationIn Stock: 11094MA200000Z4BACTGI8 Datasheet

Current PartRFQ

510FAA200M000BAGR

Skyworks Solutions Inc.In Stock: 1078510FAA200M000BAGR Datasheet

DirectRFQ

511FAA200M000BAGR

Skyworks Solutions Inc.In Stock: 936511FAA200M000BAGR Datasheet

DirectRFQ

653L20003I2T

CTS-Frequency ControlsIn Stock: 748653L20003I2T Datasheet

DirectRFQ

653V20003I2T

CTS-Frequency ControlsIn Stock: 1116653V20003I2T Datasheet

DirectRFQ

654L20003I2T

CTS-Frequency ControlsIn Stock: 895654L20003I2T Datasheet

DirectRFQ

654V20003I2T

CTS-Frequency ControlsIn Stock: 1070654V20003I2T Datasheet

DirectRFQ

XLL525200.000000I

Renesas Electronics CorporationIn Stock: 1069XLL525200.000000I Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 4MA200000Z4BACTGI8 are qualified based on the following mandatory electrical and mechanical parameters:

• Frequency: 200 MHz (exact match required)
• Output Type: LVDS (exact match required)
• Supply Voltage: 2.5V (exact match required)
• Function: Enable/Disable (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Package / Case: 6-SMD, No Lead (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

All identified substitute parts meet these criteria. Variations in base resonator type (crystal-based versus MEMS), current consumption, physical dimensions within tolerance, and product status (active versus obsolete) are secondary considerations that do not disqualify substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

For New Designs and Obsolescence Mitigation:

The 4MA200000Z4BACTGI8 is obsolete. All identified substitute parts are active products with current manufacturing support. Selection among substitutes should prioritize active product status and long-term availability.

Skyworks Solutions Si510 and Si511 Series (510FAA200M000BAGR, 511FAA200M000BAGR): These parts offer the lowest current consumption at 23mA maximum supply current, providing power efficiency advantages in battery-powered or thermally constrained applications. Both are active products from a major oscillator manufacturer.

CTS-Frequency Controls 653 and 654 Series (653L20003I2T, 653V20003I2T, 654L20003I2T, 654V20003I2T): These parts are ROHS3 compliant and REACH unaffected, meeting stringent environmental and regulatory requirements. Current consumption ranges from 65mA to 66mA. All are active products.

Renesas Electronics XLL525 Series (XLL525200.000000I): This part is manufactured by the same company as the original obsolete part, offering design continuity. It is ROHS3 compliant and REACH unaffected. Current consumption is 34mA. This part is active and recommended for designs requiring Renesas product ecosystem alignment.

Frequently Asked Questions (FAQ)

Q: Can I directly replace the 4MA200000Z4BACTGI8 with any of these substitute parts?

A: Yes. All listed substitute parts meet the mandatory electrical and mechanical specifications: 200 MHz frequency, LVDS output, 2.5V supply, enable/disable function, ±50ppm frequency stability, -40°C to 85°C operating range, 6-SMD No Lead package, and MSL 1 rating. Direct PCB-level substitution is supported without design modification.

Q: What is the difference between MEMS and crystal-based oscillators in this list?

A: The original 4MA200000Z4BACTGI8 uses a MEMS resonator. All substitute parts use crystal-based resonators. Both technologies meet the specified frequency stability (±50ppm) and all other electrical parameters. Crystal-based oscillators are widely established in production environments.

Q: Why do current consumption values differ among substitutes?

A: Current consumption variation reflects different oscillator circuit designs and manufacturing processes. The original part specifies 100mA typical supply current. Substitute parts range from 23mA to 66mA. Lower current consumption may provide thermal and power supply design benefits. Verify that your power supply and thermal design accommodate the selected part's current specification.

Q: Are there compliance or certification differences I should consider?

A: CTS-Frequency Controls parts (653 and 654 series) and the Renesas XLL525 series explicitly state ROHS3 compliance and REACH unaffected status. The Skyworks parts do not list these certifications in the provided data. If ROHS3 or REACH compliance is a design requirement, select from CTS or Renesas alternatives.

Q: Can I use these parts interchangeably in existing designs?

A: Yes, provided your design accommodates the current consumption specification of the selected substitute. All parts share identical package geometry (6-SMD, No Lead), pinout function (enable/disable), and electrical output characteristics (LVDS at 2.5V). Verify current supply capacity in your power distribution network.

Q: What is the difference between packaging types listed (Tape & Reel versus Strip)?

A: Tape & Reel (TR) packaging is standard for automated assembly processes. Strip packaging is an alternative format. Both are surface mount compatible. Confirm your assembly equipment and procurement process support the selected packaging format.