4MA200000Z3AACTGI8 Equivalent & Substitute Parts

Part Overview

The 4MA200000Z3AACTGI8 is a 200 MHz MEMS-based XO (Standard) oscillator manufactured by Renesas Electronics Corporation, featuring LVPECL output, 3.3V supply voltage, and Enable/Disable functionality in a 6-SMD, No Lead package. This part is currently obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for continued system support and new designs.

Substiute Parts

4MA200000Z3AACTGI8

Renesas Electronics CorporationIn Stock: 9494MA200000Z3AACTGI8 Datasheet

Current PartRFQ

XLP535200.000000I

Renesas Electronics CorporationIn Stock: 887XLP535200.000000I Datasheet

MFR RecommendedRFQ

653E20003I3T

CTS-Frequency ControlsIn Stock: 867653E20003I3T Datasheet

DirectRFQ

653P20003I3T

CTS-Frequency ControlsIn Stock: 824653P20003I3T Datasheet

DirectRFQ

654E20003I3T

CTS-Frequency ControlsIn Stock: 1103654E20003I3T Datasheet

DirectRFQ

654P20003I3T

CTS-Frequency ControlsIn Stock: 845654P20003I3T Datasheet

DirectRFQ

SXO53P3A481-200.000M

Suntsu Electronics, Inc.In Stock: 2046SXO53P3A481-200.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4MA200000Z3AACTGI8 is determined by strict alignment of the following parameters:

• Frequency: 200.0000 MHz (exact match required)
• Output: LVPECL (electrical interface compatibility)
• Supply Voltage: 3.3V (power supply compatibility)
• Function: Enable/Disable (functional requirement)
• Frequency Stability: ±50ppm (timing accuracy specification)
• Operating Temperature: -40°C ~ 85°C (environmental operating range)
• Package / Case: 6-SMD, No Lead (mechanical and PCB footprint compatibility)
• Mounting Type: Surface Mount (assembly process compatibility)

All identified substitute parts meet these core electrical and mechanical parameters. Variations in current consumption, physical dimensions within tolerance, and base resonator type (crystal vs. MEMS) do not preclude substitution when all primary parameters align.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with full manufacturer support, addressing the obsolescence of the 4MA200000Z3AACTGI8. Selection among substitutes should be based on the following criteria:

Renesas Electronics XLP535200.000000I: Manufacturer-recommended replacement from Renesas. Maintains Renesas ecosystem continuity. ROHS3 compliant and REACH unaffected. Slightly elevated current consumption (120mA) and increased height (1.40mm) compared to original. Suitable for applications where Renesas product continuity is preferred.

CTS-Frequency Controls 653E20003I3T and 653P20003I3T: Active crystal-based oscillators with reduced current consumption (88mA). Identical footprint dimensions to original part (5.00mm x 3.20mm). ROHS3 compliant and REACH unaffected. Increased height (1.40mm). Suitable for power-sensitive applications.

CTS-Frequency Controls 654E20003I3T and 654P20003I3T: Crystal-based oscillators with reduced current consumption (88mA) and lowest height profile (1.30mm). Include disable current specification (22mA). ROHS3 compliant and REACH unaffected. Optimal for space-constrained designs with enable/disable power management requirements.

Suntsu Electronics SXO53P3A481-200.000M: Crystal-based oscillator with lowest current consumption (80mA) and compact height (1.20mm). ROHS3 compliant. Highest inventory availability (1992 pcs). Suitable for power-optimized and space-constrained applications.

Frequently Asked Questions (FAQ)

Q: Can I directly replace the 4MA200000Z3AACTGI8 with any of these substitute parts?

A: Yes, all listed substitute parts are electrically and mechanically compatible. They share identical frequency (200 MHz), output type (LVPECL), supply voltage (3.3V), function (Enable/Disable), frequency stability (±50ppm), operating temperature range (-40°C ~ 85°C), and package type (6-SMD, No Lead). PCB footprint compatibility is maintained across all substitutes.

Q: What are the differences between MEMS and crystal-based oscillators in this comparison?

A: The original 4MA200000Z3AACTGI8 uses MEMS resonator technology. All substitute parts use crystal-based resonators. Both technologies deliver the same electrical performance specifications (frequency, stability, output type) required for this application. Crystal-based alternatives offer established supply chains and lower current consumption in this product category.

Q: Does the variation in current consumption affect circuit design?

A: Current consumption ranges from 80mA to 120mA across substitutes. If your power budget is based on the original 100mA specification, all substitutes remain within acceptable margins. The CTS 654 series and Suntsu SXO53P3A481-200.000M offer the lowest consumption (80-88mA), providing additional design margin.

Q: Are there physical dimension differences I need to consider?

A: All parts maintain the same footprint (5.00mm x 3.20mm or 5.15mm x 3.35mm). Height varies from 0.90mm (original) to 1.40mm (maximum among substitutes). Verify clearance in your specific PCB assembly if height is constrained. The CTS 654 series (1.30mm) and Suntsu part (1.20mm) offer the most compact profiles.

Q: What compliance certifications apply to these substitutes?

A: All substitute parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements. ECCN classification (EAR99) and HTSUS codes are consistent across all parts.

Q: Which substitute offers the best long-term availability?

A: All substitutes carry Active product status with current manufacturer support. Suntsu SXO53P3A481-200.000M shows the highest current inventory (1992 pcs). For long-term supply assurance, consult directly with manufacturers regarding production roadmaps and lifecycle commitments.