4MA200000Z3AACTGI Equivalent & Substitute Parts

Part Overview

The 4MA200000Z3AACTGI is a 200 MHz MEMS-based XO (Standard) oscillator manufactured by Renesas Electronics Corporation, featuring LVPECL output and 3.3V supply with Enable/Disable functionality. This component is classified as Obsolete, making identification of suitable substitute parts essential for ongoing system support and new design implementations. The part is housed in a 6-SMD, No Lead package with a compact footprint of 5.00mm × 3.20mm and operates across the industrial temperature range of -40°C to 85°C.

Substiute Parts

4MA200000Z3AACTGI

Renesas Electronics CorporationIn Stock: 12274MA200000Z3AACTGI Datasheet

Current PartRFQ

XLP535200.000000I

Renesas Electronics CorporationIn Stock: 887XLP535200.000000I Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 4MA200000Z3AACTGI is determined by strict equivalence across the following critical parameters:

• Frequency: 200 MHz (exact match required)
• Output Type: LVPECL (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Function: Enable/Disable capability (exact match required)
• Package / Case: 6-SMD, No Lead (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Mounting Type: Surface Mount (exact match required)

The substitute part XLP535200.000000I meets all critical electrical and mechanical parameters. While the base resonator differs (Crystal vs. MEMS), both technologies deliver equivalent performance within the specified frequency stability of ±50ppm and operating conditions. The substitute part is classified as Active product status, ensuring long-term availability and support.

Parameter Comparison

Engineering Selection Recommendations

The XLP535200.000000I is the qualified substitute for the obsolete 4MA200000Z3AACTGI based on the following engineering criteria:

Electrical Equivalence: Both parts deliver identical frequency (200 MHz), output type (LVPECL), supply voltage (3.3V), frequency stability (±50ppm), and functional capability (Enable/Disable). The substitute's maximum supply current of 120mA is within acceptable tolerance for most applications designed for the original 100mA specification.

Mechanical Compatibility: The 6-SMD, No Lead package is identical. Dimensional variations (5.15mm × 3.35mm vs. 5.00mm × 3.20mm for the original, and 1.40mm vs. 0.90mm height) are minimal and compatible with standard PCB layouts. Verification of clearance in height-constrained applications is recommended during design review.

Product Status and Support: The substitute part is classified as Active, ensuring continued manufacturing, availability, and technical support from Renesas Electronics Corporation. The original part's Obsolete status necessitates transition to this substitute for long-term supply chain stability.

Compliance: Both parts carry identical MSL rating (1 - Unlimited), ECCN classification (EAR99), and HTSUS code (8542.39.0001). The substitute is ROHS3 Compliant and REACH Unaffected, meeting modern regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can XLP535200.000000I be used as a direct replacement for 4MA200000Z3AACTGI?

A: Yes. Both parts meet identical electrical specifications for frequency, output type, supply voltage, and functional capability. The 6-SMD, No Lead package is mechanically compatible. Minor dimensional differences (approximately 0.15mm in length and width, 0.50mm in height) are within standard PCB layout tolerances.

Q: What is the difference between MEMS and Crystal resonators in these oscillators?

A: The original part uses MEMS (Micro-Electro-Mechanical Systems) technology, while the substitute uses a Crystal resonator. Both technologies deliver the specified ±50ppm frequency stability and 200 MHz output. Crystal-based oscillators are widely established in production environments and offer equivalent performance for this application.

Q: Is the higher supply current of the substitute (120mA vs. 100mA) a concern?

A: The substitute's maximum supply current of 120mA represents a 20mA increase. This is typically acceptable in most circuit designs. However, power supply capacity and thermal management should be verified during design integration, particularly in power-constrained applications.

Q: Are there any height clearance issues with the substitute part?

A: The substitute has a maximum seated height of 1.40mm compared to the original's 0.90mm. This 0.50mm increase should be verified against PCB layout constraints, particularly in applications with limited vertical clearance or stacked component arrangements.

Q: What is the availability status of these parts?

A: The original 4MA200000Z3AACTGI is Obsolete. The substitute XLP535200.000000I is Active, with 816 units in current inventory, ensuring reliable supply for new designs and ongoing production requirements.

Q: Are both parts compliant with current regulatory standards?

A: Both parts carry identical MSL (1 - Unlimited) and ECCN (EAR99) classifications. The substitute is additionally certified as ROHS3 Compliant and REACH Unaffected, meeting modern environmental and regulatory requirements.