4HF200000Z3AACTGI Equivalent & Substitute Parts

Part Overview

The 4HF200000Z3AACTGI is a 200 MHz MEMS-based XO (Standard) oscillator manufactured by Renesas Electronics Corporation, featuring LVPECL output, 3.3V supply voltage, and Enable/Disable functionality. This component is classified as Obsolete, making identification of suitable substitute parts essential for ongoing system support and new design implementations.

The primary reason for identifying alternatives is the discontinued status of this MEMS oscillator platform. Substitute parts must maintain functional and electrical equivalence across critical parameters including frequency, output type, supply voltage, and package configuration.

Substiute Parts

4HF200000Z3AACTGI

Renesas Electronics CorporationIn Stock: 8094HF200000Z3AACTGI Datasheet

Current PartRFQ

XLP535200.000000I

Renesas Electronics CorporationIn Stock: 887XLP535200.000000I Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4HF200000Z3AACTGI is determined by strict equivalence across the following critical parameters:

• Frequency: 200 MHz (exact match required)
• Output Type: LVPECL (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Function: Enable/Disable capability (exact match required)
• Package / Case: 6-SMD, No Lead (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Frequency Stability: ±50ppm (exact match required)

The substitute part XLP535200.000000I meets all critical electrical and mechanical parameters. The primary difference is the base resonator technology (Crystal-based instead of MEMS-based) and improved product status (Active vs. Obsolete). Physical dimensions show minor variations within acceptable tolerances for PCB layout compatibility.

Parameter Comparison

Engineering Selection Recommendations

The XLP535200.000000I is the qualified substitute for the 4HF200000Z3AACTGI based on the following engineering criteria:

Functional Equivalence: Both parts deliver identical electrical performance across frequency, output type, supply voltage, and enable/disable functionality. The 200 MHz LVPECL output with 3.3V supply and ±50ppm stability are preserved.

Product Status: The substitute part holds Active status with full manufacturer support, eliminating supply chain risk associated with the Obsolete 4HF200000Z3AACTGI.

Compliance: The XLP535200.000000I carries ROHS3 compliance and REACH Unaffected certification, meeting current regulatory requirements for electronic component procurement.

Physical Compatibility: Both parts use identical 6-SMD, No Lead packaging with Surface Mount configuration. Dimensional variations (5.15mm x 3.35mm vs. 5.00mm x 3.20mm length and width; 1.40mm vs. 0.90mm height) are within standard PCB layout tolerances and do not require design modification.

Operational Differences: The substitute part exhibits improved moisture sensitivity (MSL 1 vs. MSL 3), reducing handling and storage requirements. Maximum supply current increases from 95mA (Typ) to 120mA, which must be evaluated within the context of system power budgets.

Frequently Asked Questions (FAQ)

Q: Can the XLP535200.000000I directly replace the 4HF200000Z3AACTGI without PCB modification?

A: Yes. Both parts use identical 6-SMD, No Lead packaging and Surface Mount configuration. Dimensional differences (approximately 0.15mm in length, 0.06mm in width, and 0.50mm in height) fall within standard PCB layout tolerances and do not require design changes.

Q: What is the primary technical difference between these parts?

A: The base resonator technology differs: the 4HF200000Z3AACTGI uses MEMS technology, while the XLP535200.000000I uses a Crystal resonator. Both deliver identical electrical specifications at 200 MHz LVPECL output with 3.3V supply and ±50ppm stability.

Q: Does the increased supply current of the substitute part affect system design?

A: The XLP535200.000000I specifies 120mA maximum supply current compared to 95mA (Typ) for the original part. System power budgets must accommodate this 25mA increase. Verify that power delivery circuits can sustain this current level under all operating conditions.

Q: What are the implications of the improved moisture sensitivity level?

A: The XLP535200.000000I carries MSL 1 (Unlimited) compared to MSL 3 (168 Hours) for the original part. This improvement reduces handling and storage constraints, allowing extended shelf life without baking requirements prior to assembly.

Q: Are there any compliance or regulatory differences?

A: The XLP535200.000000I is ROHS3 Compliant and REACH Unaffected. The original part specifications do not include these certifications. If your application requires these compliance certifications, the substitute part satisfies these requirements.

Q: Is the substitute part available in the same packaging format?

A: Yes. Both parts are supplied in 6-SMD, No Lead Surface Mount packages. The substitute part is available in Strip packaging format, which is standard for production quantities.