TE Connectivity AMP Connectors 499922-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 499922-7 is a rectangular connector header designed for through-hole mounting applications. This shrouded 30-position connector operates at 0.100" (2.54mm) pitch and supports board-to-cable/wire connections with solder termination. The part is currently active in production status. Substitute parts are identified to address packaging availability, compliance requirements, and inventory considerations while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Specification
Connector Type	Header
Contact Type	Male Pin
Number of Positions	30
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Shrouding	Shrouded - 4 Wall
Contact Shape	Square
Operating Temperature Range	-65°C ~ 105°C
Current Rating	1A
Voltage Rating	250VAC
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the 499922-7 are classified based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

Critical Parameters for Substitution:

30-position, 2-row configuration at 0.100" (2.54mm) pitch
Male pin contact type with square contact shape
Through-hole solder termination
Shrouded 4-wall design with keying slot and mounting flange
UL94 V-0 flammability rating
Moisture Sensitivity Level 1

Substitution Categories:

Direct Packaging Equivalent: Part 5499922-7 is the same connector in alternative packaging (Tray vs. Bulk), manufactured by TE Connectivity AMP Connectors under the same base product number 5499922.

Cross-Manufacturer Equivalents: Parts N3440-6302RB, N3440-6303RB (3M Series 3000), and 71918-130LF (Amphenol ICC Quickie™ Series) provide functional equivalence with variations in contact dimensions, insulation height, and contact finish specifications while maintaining core electrical and mechanical compatibility.

Parameter Comparison

Parameter	499922-7 (Main)	5499922-7	71918-130LF	N3440-6302RB	N3440-6303RB
Manufacturer	TE Connectivity AMP	TE Connectivity AMP	Amphenol ICC (FCI)	3M	3M
Series	AMP-Latch	AMP-Latch	Quickie™	3000	3000
Connector Type	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	30	30	30	30	30
Number of Rows	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Contact Shape	Square	Square	Square	Square	Square
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.240" (6.10mm)	0.240" (6.10mm)
Contact Length - Post	0.110" (2.79mm)	0.110" (2.79mm)	0.114" (2.90mm)	0.112" (2.84mm)	0.155" (3.94mm)
Insulation Height	0.549" (13.94mm)	0.549" (13.94mm)	0.685" (17.40mm)	0.680" (17.27mm)	0.680" (17.27mm)
Contact Finish - Mating	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold	Gold
Contact Finish - Post	Tin-Lead	Tin	Tin	Tin	Tin
Operating Temperature	-65°C ~ 105°C	-65°C ~ 105°C	Not Specified	-55°C ~ 105°C	-55°C ~ 105°C
Current Rating	1A	1A	Not Specified	1.75A	1.75A
Voltage Rating	250VAC	250VAC	Not Specified	Not Specified	Not Specified
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Tray	Tube	Tray	Tray

Engineering Selection Recommendations

5499922-7 (TE Connectivity AMP Connectors): This part is the direct equivalent of 499922-7 with identical electrical and mechanical specifications. The primary difference is packaging format (Tray vs. Bulk) and RoHS compliance status (ROHS3 Compliant vs. non-compliant). Selection of 5499922-7 is appropriate when RoHS3 compliance is required or when tray packaging is preferred for inventory management.

71918-130LF (Amphenol ICC Quickie™ Series): This cross-manufacturer equivalent provides functional compatibility with minor dimensional variations in contact length and insulation height. The part is RoHS Compliant and operates at MSL 1. Operating temperature range and current/voltage ratings are not specified for this part. Selection is appropriate when Amphenol ICC sourcing is preferred and dimensional variations are acceptable for the application.

N3440-6302RB and N3440-6303RB (3M Series 3000): Both 3M parts provide functional equivalence with higher current ratings (1.75A vs. 1A) and RoHS compliance. The primary distinction between these two parts is contact post length: N3440-6302RB features 0.112" (2.84mm) post length, while N3440-6303RB features 0.155" (3.94mm) post length. Both operate at -55°C to 105°C (vs. -65°C to 105°C for the main part). Selection depends on required post length for specific PCB thickness and application requirements.

Compliance Considerations: The main part 499922-7 is RoHS non-compliant. For applications requiring RoHS compliance, substitute parts 5499922-7, 71918-130LF, N3440-6302RB, and N3440-6303RB all meet RoHS requirements.

Frequently Asked Questions (FAQ)

Q: Can 5499922-7 be used as a direct replacement for 499922-7?

A: Yes. Part 5499922-7 is electrically and mechanically identical to 499922-7. The differences are packaging format (Tray vs. Bulk) and RoHS compliance status (ROHS3 Compliant vs. non-compliant). Both parts maintain the same 30-position, 2-row configuration at 0.100" (2.54mm) pitch, identical contact dimensions, and operating temperature range of -65°C to 105°C.

Q: What are the key dimensional differences between the TE Connectivity parts and the 3M alternatives?

A: The 3M N3440 series parts feature increased insulation height (0.680" vs. 0.549") compared to the TE Connectivity AMP-Latch series. Additionally, the 3M parts have higher current ratings (1.75A vs. 1A) and a slightly reduced operating temperature minimum (-55°C vs. -65°C). Contact post lengths vary: N3440-6302RB provides 0.112" post length, while N3440-6303RB provides 0.155" post length for applications requiring deeper PCB penetration.

Q: How does the Amphenol ICC 71918-130LF differ from the TE Connectivity 499922-7?

A: The 71918-130LF maintains the same 30-position, 2-row 0.100" (2.54mm) pitch configuration. Dimensional differences include slightly shorter mating contact length (0.228" vs. 0.240") and increased insulation height (0.685" vs. 0.549"). The Amphenol part uses phosphor bronze contacts with glass-filled thermoplastic insulation and features GXT™ gold plating on mating contacts. Operating temperature range and electrical ratings are not specified for this part.

Q: Are all substitute parts suitable for the same PCB thickness?

A: No. Contact post length varies across substitute parts. The main part 499922-7 and 5499922-7 feature 0.110" (2.79mm) post length. The Amphenol 71918-130LF provides 0.114" (2.90mm), the 3M N3440-6302RB provides 0.112" (2.84mm), and the 3M N3440-6303RB provides 0.155" (3.94mm). Selection must account for specific PCB thickness requirements.

Q: What is the significance of the insulation height differences?

A: Insulation height affects the overall connector profile and board-to-board spacing in stacked configurations. The TE Connectivity parts feature 0.549" insulation height, while the 3M and Amphenol alternatives feature approximately 0.680-0.685" insulation height. This difference impacts mechanical clearance and may affect component placement on densely populated boards.

Q: Which substitute part should be selected for RoHS-compliant applications?

A: All substitute parts (5499922-7, 71918-130LF, N3440-6302RB, and N3440-6303RB) are RoHS compliant. The main part 499922-7 is RoHS non-compliant. For RoHS compliance requirements, any of the four substitute parts are suitable, with selection based on packaging preference, dimensional requirements, and sourcing considerations.

Q: What packaging formats are available for these parts?

A: The main part 499922-7 is supplied in Bulk packaging. Substitute part 5499922-7 is supplied in Tray packaging. The Amphenol 71918-130LF is supplied in Tube packaging. The 3M parts N3440-6302RB and N3440-6303RB are supplied in Tray packaging. Packaging selection affects inventory management, handling, and cost considerations.

Q: Are the contact finish specifications compatible across all parts?

A: All parts feature gold or gold-based mating contact finishes suitable for standard connector applications. The main part 499922-7 specifies Tin-Lead post finish, while substitute parts specify Tin post finish. The Amphenol part features GXT™ gold plating on mating contacts with higher thickness (30.0µin vs. 15.0µin for the main part). These variations do not affect functional compatibility for standard solder termination applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message