TE Connectivity AMP Connectors 499910-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 499910-1 is an active rectangular connector header designed for through-hole mounting applications. This vertical connector accommodates 10 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The connector features shrouded 4-wall construction with latch lock/eject hooks and solder termination, suitable for board-to-cable/wire interconnections. Substitute parts are identified based on matching electrical and mechanical parameters including pitch, position count, row configuration, mounting type, and operating temperature range.

Key Parameters

Parameter	Specification
Connector Type	Header
Contact Type	Male Pin
Number of Positions	10
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Shrouding	Shrouded - 4 Wall
Fastening Type	Latch Lock/Eject Hooks, Short
Operating Temperature	-55°C ~ 105°C
Current Rating	1A
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the 499910-1 are classified based on strict alignment with the following critical parameters:

Primary Matching Criteria:

Number of Positions: 10
Number of Rows: 2
Pitch - Mating: 0.100" (2.54mm)
Row Spacing - Mating: 0.100" (2.54mm)
Connector Type: Header
Contact Type: Male Pin
Mounting Type: Through Hole
Termination: Solder
Shrouding: Shrouded - 4 Wall
Fastening Type: Latch Lock/Eject Hooks, Short
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Direct Substitutes maintain all primary matching criteria and are functionally interchangeable. These include TE Connectivity 5499910-1, 3M D3793-6202-AR, 3M N3793-6202RB, 3M N3793-6203RB, and Amphenol ICC 71918-210LF.

Similar Substitutes share the core electrical and mechanical interface parameters but may differ in secondary specifications such as contact finish thickness, insulation material composition, or contact length variations. The 3M N3793-2202RB differs in shrouding configuration (3-wall versus 4-wall) and is classified as a similar substitute.

Non-Substitutes include parts that deviate from critical parameters. The HARTING 09195146904 features 14 positions and is therefore not a substitute despite matching pitch and other characteristics.

Parameter Comparison

Parameter	499910-1 (Main)	5499910-1	D3793-6202-AR	N3793-6202RB	N3793-6203RB	71918-210LF	N3793-2202RB
Manufacturer	TE Connectivity	TE Connectivity	3M	3M	3M	Amphenol ICC	3M
Number of Positions	10	10	10	10	10	10	10
Number of Rows	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Connector Type	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 3 Wall
Fastening Type	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Short
Operating Temperature	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	Not specified	-55°C ~ 105°C
Current Rating (Amps)	1A	1A	1.75A	1.75A	1.75A	Not specified	1.75A
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
RoHS Status	Not applicable	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Product Status	Active	Active	Active	Active	Active	Active	Active
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.240" (6.10mm)
Contact Length - Post	0.110" (2.79mm)	0.110" (2.79mm)	0.112" (2.84mm)	0.112" (2.84mm)	0.155" (3.94mm)	0.114" (2.90mm)	0.112" (2.84mm)
Insulation Height	0.549" (13.94mm)	0.549" (13.94mm)	0.680" (17.27mm)	0.680" (17.27mm)	0.680" (17.27mm)	0.685" (17.40mm)	0.680" (17.27mm)
Contact Finish - Mating	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold	Gold	Gold	Gold, GXT™	Gold
Contact Finish - Post	Tin-Lead	Tin	Tin	Tin	Tin	Tin	Tin
Insulation Color	Black	Black	Black	Black	Black	Gray	Black
Packaging	Bulk	Bulk	Tray	Bulk	Bulk	Tube	Bulk

Engineering Selection Recommendations

Direct Substitutes (Fully Interchangeable):

The TE Connectivity 5499910-1 is a direct substitute with identical electrical and mechanical specifications. This part is RoHS Compliant and REACH Unaffected, offering improved regulatory compliance compared to the original 499910-1. The 5499910-1 maintains all critical parameters including 10 positions, 2-row configuration, 0.100" pitch, through-hole mounting, and solder termination.

The 3M D3793-6202-AR, 3M N3793-6202RB, and 3M N3793-6203RB are direct substitutes meeting all primary matching criteria. All three parts are RoHS Compliant and REACH Unaffected. The N3793-6203RB features an extended contact post length of 0.155" (3.94mm) compared to 0.112" (2.84mm) in the N3793-6202RB, accommodating applications requiring deeper board penetration. Both 3M parts support higher current ratings of 1.75A versus the 1A rating of the original part.

The Amphenol ICC 71918-210LF is a direct substitute with matching position count, pitch, and mounting configuration. This part is RoHS Compliant and packaged in tube format. The 71918-210LF features a contact mating length of 0.228" (5.80mm) and insulation height of 0.685" (17.40mm), with operating temperature range not specified in available documentation.

Similar Substitute (Limited Compatibility):

The 3M N3793-2202RB differs in shrouding configuration, featuring 3-wall shrouding instead of 4-wall. This part maintains all other critical parameters including 10 positions, 2-row configuration, 0.100" pitch, and solder termination. The N3793-2202RB is RoHS Compliant and REACH Unaffected. The reduced shrouding may affect mechanical protection and keying alignment in applications requiring full 4-wall enclosure.

Non-Substitutes:

The HARTING 09195146904 is not a substitute due to 14-position configuration, which exceeds the 10-position requirement of the original part.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5499910-1 replace the 499910-1 in existing designs?

A: Yes. The 5499910-1 maintains identical electrical and mechanical specifications including 10 positions, 2-row configuration, 0.100" pitch, through-hole solder termination, and operating temperature range of -55°C to 105°C. The primary difference is improved regulatory compliance with RoHS Compliant status and REACH Unaffected designation.

Q: What is the difference between the 3M N3793-6202RB and N3793-6203RB?

A: Both parts are functionally equivalent with identical position count, pitch, and mounting configuration. The primary difference is contact post length: the N3793-6202RB features 0.112" (2.84mm) post length, while the N3793-6203RB features 0.155" (3.94mm) post length. The extended post length in the N3793-6203RB accommodates applications requiring deeper penetration through thicker printed circuit boards.

Q: Are the 3M D3793-6202-AR and N3793-6202RB interchangeable?

A: Yes. Both parts share identical electrical and mechanical specifications including 10 positions, 2-row configuration, 0.100" pitch, and solder termination. The primary difference is packaging format: the D3793-6202-AR is supplied in tray packaging, while the N3793-6202RB is supplied in bulk packaging. Both support 1.75A current rating and operate across -55°C to 105°C temperature range.

Q: Why does the Amphenol ICC 71918-210LF have different contact dimensions?

A: The 71918-210LF maintains the critical interface parameters of 10 positions, 2-row configuration, and 0.100" pitch spacing. Secondary dimensional variations including contact mating length of 0.228" (5.80mm) and insulation height of 0.685" (17.40mm) reflect design differences between manufacturers while preserving functional compatibility with standard 2.54mm pitch connector systems.

Q: Can the 3M N3793-2202RB be used as a substitute despite 3-wall shrouding?

A: The N3793-2202RB maintains all critical electrical and mechanical parameters including 10 positions, 2-row configuration, 0.100" pitch, and solder termination. However, the 3-wall shrouding configuration differs from the 4-wall shrouding of the original 499910-1. Applications requiring full 4-wall mechanical protection and keying alignment should use direct substitutes with 4-wall shrouding. The N3793-2202RB is suitable for applications where reduced shrouding is acceptable.

Q: What is the significance of contact finish differences between substitute parts?

A: The original 499910-1 specifies Tin-Lead post finish, while substitute parts specify Tin post finish. This reflects industry transition away from lead-containing materials. All substitute parts maintain gold or gold-palladium mating contact finish with specified thickness values. The contact finish composition does not affect electrical or mechanical interchangeability for standard applications.

Q: Why is the HARTING 09195146904 not a substitute?

A: The HARTING 09195146904 features 14 positions arranged in 2 rows, compared to the 10-position requirement of the 499910-1. This fundamental difference in position count makes the part incompatible with designs requiring exactly 10 contact positions. Despite matching pitch and other characteristics, the increased position count disqualifies it as a substitute.

Q: Are all substitute parts RoHS Compliant?

A: All identified substitute parts are RoHS Compliant or ROHS3 Compliant. The original 499910-1 has RoHS status listed as "Not applicable." Substitute parts offer improved regulatory compliance for applications subject to RoHS requirements. Verify specific RoHS compliance requirements for your application before component selection.

Q: What packaging options are available for substitute parts?

A: Substitute parts are available in multiple packaging formats: bulk packaging (5499910-1, N3793-6202RB, N3793-6203RB, N3793-2202RB), tray packaging (D3793-6202-AR), and tube packaging (71918-210LF). Packaging selection depends on production volume requirements and inventory management practices. All packaging formats contain identical connector specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message