TE Connectivity AMP Connectors 499141-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 499141-9 is a rectangular connector header designed for through-hole, right-angle mounting applications. This connector features 40 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-cable/wire interconnections. The part is classified as Active product status and is currently in stock with 930 pieces available in bulk packaging. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when specific packaging, compliance, or material requirements necessitate component substitution.

Substiute Parts

499141-9

TE Connectivity AMP ConnectorsIn Stock: 955499141-9 Datasheet

Current PartRFQ

5499141-9

TE Connectivity AMP ConnectorsIn Stock: 5001745499141-9 Datasheet

DirectRFQ

71922-140LF

Amphenol ICC (FCI)In Stock: 155071922-140LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connector headers is determined by strict equivalence across the following critical parameters: connector type, contact type, number of positions, number of rows, mating pitch, row spacing, mounting type, shrouding configuration, and termination method. All identified substitute parts maintain these core electrical and mechanical specifications.

The substitute parts are grouped into two categories:

Direct Manufacturer Equivalent (5499141-9): This part is manufactured by TE Connectivity AMP Connectors, the same manufacturer as the primary part number 499141-9. It shares identical electrical and mechanical specifications with the exception of packaging format (Tray versus Bulk) and post-termination finish material (Tin versus Tin-Lead). This part achieves RoHS Compliance and REACH Unaffected status, contrasting with the primary part's non-compliant designation.

Similar Manufacturer Alternative (71922-140LF): This part is manufactured by Amphenol ICC (FCI) under the Quickie™ series designation. It maintains equivalence across all critical parameters including 40 positions, 2-row configuration, 0.100" (2.54mm) pitch, through-hole right-angle mounting, shrouded 4-wall design, and solder termination. Minor variations exist in contact length specifications, insulation height, contact material composition (Phosphor Bronze versus Brass), and insulation material properties. This part is RoHS Compliant and available in Tube packaging.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (499141-9): Select this part when bulk packaging is required and RoHS non-compliance is acceptable for the application. This part is manufactured by TE Connectivity AMP Connectors and maintains the AMP-Latch series designation with Tin-Lead post termination finish.

Direct Equivalent Selection (5499141-9): Select this part when RoHS Compliance is mandated by design or regulatory requirements. This part is functionally equivalent to 499141-9 with identical electrical and mechanical specifications. The primary differences are packaging format (Tray versus Bulk) and post-termination finish material (Tin versus Tin-Lead). This part achieves RoHS Compliant status and REACH Unaffected designation, making it suitable for applications with environmental compliance requirements. Inventory availability is significantly higher at 500,100 pieces.

Alternative Manufacturer Selection (71922-140LF): Select this part when cross-manufacturer sourcing is required or when Amphenol ICC (FCI) Quickie™ series components are specified. This part maintains electrical and mechanical equivalence across all critical parameters. Minor dimensional variations exist in contact length and insulation height specifications. This part is RoHS Compliant and available in Tube packaging. Electrical ratings (voltage and current) are not specified for this part; verification against application requirements is necessary prior to selection.

Frequently Asked Questions (FAQ)

Q: Can 5499141-9 be used as a direct replacement for 499141-9?

A: Yes. The 5499141-9 is a direct equivalent with identical electrical and mechanical specifications. The primary differences are packaging format (Tray versus Bulk) and post-termination finish material (Tin versus Tin-Lead). Both parts maintain 40 positions, 2-row configuration, 0.100" (2.54mm) pitch, through-hole right-angle mounting, and solder termination. The 5499141-9 achieves RoHS Compliance, whereas 499141-9 is RoHS non-compliant.

Q: What are the key differences between 499141-9 and 71922-140LF?

A: Both parts share identical core specifications: 40 positions, 2 rows, 0.100" (2.54mm) pitch, through-hole right-angle mounting, shrouded 4-wall design, and solder termination. Differences include manufacturer (TE Connectivity versus Amphenol ICC), series designation (AMP-Latch versus Quickie™), contact material (Brass versus Phosphor Bronze), contact length specifications (0.240" versus 0.228" mating; 0.110" versus 0.114" post), and insulation height (0.315" versus 0.339"). The 71922-140LF does not specify electrical ratings (voltage and current).

Q: Is the 71922-140LF compatible with applications designed for 499141-9?

A: The 71922-140LF maintains equivalence across all critical electrical and mechanical parameters required for board-to-cable/wire interconnection. However, minor dimensional variations in contact length and insulation height exist. The 71922-140LF does not specify voltage and current ratings; application requirements must be verified against available specifications before selection.

Q: What packaging options are available for these connector headers?

A: The 499141-9 is supplied in Bulk packaging (930 pieces available). The 5499141-9 is supplied in Tray packaging (500,100 pieces available). The 71922-140LF is supplied in Tube packaging (1,442 pieces available). Packaging selection depends on inventory requirements and handling preferences.

Q: Are all three parts RoHS compliant?

A: No. The 499141-9 is RoHS non-compliant. Both the 5499141-9 and 71922-140LF are RoHS Compliant. Applications with environmental compliance mandates should specify either 5499141-9 or 71922-140LF.

Q: What is the difference between Tin-Lead and Tin post-termination finishes?

A: The 499141-9 features Tin-Lead post-termination finish (100.0µin / 2.54µm thickness). The 5499141-9 and 71922-140LF feature Tin post-termination finish. Tin-Lead finishes are associated with RoHS non-compliance, while Tin finishes support RoHS Compliance. Both finishes provide solder termination capability.

Q: What is the operating temperature range for these connectors?

A: The 499141-9 and 5499141-9 both specify an operating temperature range of -65°C to 105°C. The 71922-140LF does not specify an operating temperature range in available documentation.

Q: What electrical ratings apply to these connectors?

A: The 499141-9 and 5499141-9 both specify 250VAC voltage rating and 1A per contact current rating. The 71922-140LF does not specify voltage or current ratings in available documentation.