TE Connectivity 4-828584-0 Rectangular Connector Header Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP-Latch 4-828584-0 is a through-hole, right-angle rectangular connector header with 40 positions at 2.54mm (0.100") pitch. This component features a shrouded 4-wall design with solder termination and latch lock/eject hook fastening. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain functional compatibility with existing designs while offering improved availability and compliance status.

Substiute Parts

4-828584-0

TE Connectivity AMP ConnectorsIn Stock: 10954-828584-0 Datasheet

Current PartRFQ

5499345-9

TE Connectivity AMP ConnectorsIn Stock: 58755499345-9 Datasheet

SimilarRFQ

71922-140LF

Amphenol ICC (FCI)In Stock: 155071922-140LF Datasheet

SimilarRFQ

71922-240LF

Amphenol ICC (FCI)In Stock: 125971922-240LF Datasheet

SimilarRFQ

N3432-5202RB

3MIn Stock: 1041N3432-5202RB Datasheet

SimilarRFQ

N3432-5203RB

3MIn Stock: 1256N3432-5203RB Datasheet

SimilarRFQ

N3432-5302RB

3MIn Stock: 2675N3432-5302RB Datasheet

SimilarRFQ

N3432-5303RB

3MIn Stock: 1213N3432-5303RB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 4-828584-0 is determined by strict equivalence across the following critical parameters:

Primary Matching Criteria:

• Connector type: Header
• Contact type: Male pin
• Number of positions: 40
• Number of rows: 2
• Pitch - mating: 0.100" (2.54mm)
• Row spacing - mating: 0.100" (2.54mm)
• Mounting type: Through hole, right angle
• Shrouding: Shrouded - 4 wall
• Termination: Solder
• Style: Board to cable/wire or board to board

Secondary Compatibility Factors:

• Fastening type: Latch lock/eject hooks (standard, short, or long variants)
• Contact shape: Circular or square (both acceptable for mating compatibility)
• Contact material: Brass or phosphor bronze (both acceptable)
• Insulation material: Polyester glass-filled or thermoplastic glass-filled (both acceptable)

All identified substitute parts meet these criteria. Variations in contact length, insulation height, contact finish thickness, and operating temperature specifications do not preclude substitution when the primary and secondary criteria are satisfied.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: TE Connectivity 5499345-9

The 5499345-9 is the direct active equivalent within the TE Connectivity AMP-Latch series. This part maintains manufacturer continuity and series compatibility while offering active product status and RoHS compliance. The part is available in tray packaging with 5776 units in stock. Minor variations in contact length (0.240" vs. 0.246"), insulation height (0.315" vs. 0.346"), and contact shape (square vs. circular) do not affect functional compatibility. Operating temperature range (-65°C to 105°C) and electrical ratings (1A per contact, 250VAC) are specified for this variant.

Secondary Recommendations: Amphenol ICC (FCI) Quickie™ Series

The 71922-140LF and 71922-240LF represent active alternatives from Amphenol ICC (FCI) within the Quickie™ series. Both parts are RoHS compliant and available in tube packaging. The primary distinction between these two variants is the fastening type: 71922-140LF features standard latch lock/eject hooks, while 71922-240LF features short variants. Contact material is phosphor bronze with GXT™ gold finish. These parts are suitable for applications where cross-manufacturer compatibility is acceptable.

Tertiary Recommendations: 3M 3000 Series

The 3M N3432 series (N3432-5202RB, N3432-5302RB, N3432-5303RB) provides additional alternatives with RoHS compliance and REACH unaffected status. These parts feature copper alloy contact material and are available in bulk packaging. Variants differ in fastening type (short vs. long hooks) and contact post length (0.112" vs. 0.155"), accommodating different board thickness requirements. Operating temperature range (-55°C to 105°C) and current rating (1.75A) are specified.

Compliance Considerations:

All substitute parts are RoHS compliant, addressing regulatory requirements that the obsolete 4-828584-0 does not satisfy. The 3M variants carry REACH unaffected status, while Amphenol ICC parts are REACH affected. Selection should account for end-application regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can the 5499345-9 directly replace the 4-828584-0 in existing designs?

A: Yes. The 5499345-9 maintains all critical mating parameters: 40 positions, 2-row configuration, 2.54mm pitch, shrouded 4-wall design, through-hole right-angle mounting, and solder termination. Minor differences in contact geometry and insulation dimensions do not affect electrical or mechanical compatibility.

Q: What is the significance of the contact shape difference (circular vs. square)?

A: Contact shape does not affect mating compatibility. Both circular and square contact geometries are acceptable for the same mating interface. The shape difference reflects manufacturing process variations between suppliers and does not impact electrical performance or mechanical engagement.

Q: How do fastening type variants (standard, short, long) affect substitution?

A: Fastening type variants (standard, short, or long latch hooks) are interchangeable for the same connector interface. The variant designation reflects hook length, which accommodates different application requirements but does not prevent substitution. Selection should be based on specific application requirements.

Q: Are there packaging differences between substitute parts?

A: Yes. The 4-828584-0 was supplied without specified packaging. Substitute parts are available in tray (5499345-9), tube (71922-140LF, 71922-240LF), or bulk (N3432 series) packaging. Packaging selection should align with procurement and assembly requirements.

Q: What is the impact of contact material differences (brass, phosphor bronze, copper alloy)?

A: All three contact materials (brass, phosphor bronze, copper alloy) are acceptable for this connector category. Material selection reflects manufacturer design choices and does not affect electrical or mechanical compatibility. All materials provide equivalent performance in standard applications.

Q: Do operating temperature specifications affect substitution eligibility?

A: Operating temperature specifications are provided for active parts (5499345-9: -65°C to 105°C; N3432 series: -55°C to 105°C) but were not specified for the obsolete 4-828584-0. All substitute parts cover standard industrial temperature ranges. Application-specific temperature requirements should be evaluated against provided specifications.

Q: What is the difference between RoHS compliant and REACH affected/unaffected status?

A: RoHS compliance indicates conformance to the Restriction of Hazardous Substances directive. REACH status indicates whether a part is subject to the Registration, Evaluation, Authorization and Restriction of Chemicals regulation. All substitute parts are RoHS compliant. REACH status varies: 3M parts are REACH unaffected, Amphenol ICC parts are REACH affected, and TE Connectivity 5499345-9 is REACH undefined. Selection should account for end-market regulatory requirements.

Q: Can the N3432-5202RB and N3432-5302RB be used interchangeably?

A: Yes. Both parts are from the 3M 3000 series with identical mating parameters. The primary difference is contact post length: N3432-5202RB has 0.112" (2.84mm) posts with short fastening hooks, while N3432-5302RB has 0.112" (2.84mm) posts with long fastening hooks. Post length selection depends on board thickness and application requirements.

Q: What inventory levels are available for each substitute part?

A: Current inventory levels are: 5499345-9 (5776 units), 71922-140LF (1442 units), 71922-240LF (1232 units), N3432-5202RB (935 units), N3432-5302RB (2658 units), N3432-5303RB (1144 units). Inventory availability should be confirmed for production requirements.