Amphenol ICC 48247-000 Socket Contact Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 48247-000 is a socket contact for rectangular connectors in the Mini-PV™ and Basics+ series, designed for 18-20 AWG wire gauges with gold plating and crimp termination. This part is classified as obsolete, making identification of active equivalent and substitute parts essential for ongoing procurement and design continuity. Substitute parts must maintain identical electrical and mechanical specifications to ensure connector assembly compatibility and performance.

Substiute Parts

48247-000

Amphenol ICC (FCI)In Stock: 75848247-000 Datasheet

Current PartRFQ

48247-000LF

Amphenol ICC (FCI)In Stock: 650548247-000LF Datasheet

DirectRFQ

0945180100

MolexIn Stock: 9380945180100 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 48247-000 is determined by the following critical parameters:

• Wire gauge compatibility: 18-20 AWG
• Contact termination method: Crimp
• Contact type: Socket
• Contact finish: Gold plating with 15.0µin thickness specification

Two substitute parts are identified:

Direct Amphenol ICC Substitute (48247-000LF): Maintains identical electrical and mechanical specifications within the same manufacturer series. This part differs only in product status (active vs. obsolete) and RoHS compliance status.

Cross-Manufacturer Substitute (Molex 0945180100): Provides functional equivalence through matching wire gauge, crimp termination, and contact type. However, this part operates in a different connector category (Blade Type Power Connectors) and uses a different contact material (brass vs. gold finish specification).

Parameter Comparison

Engineering Selection Recommendations

For direct replacement within Mini-PV™ and Basics+ series assemblies: The 48247-000LF is the primary substitute. This part maintains identical specifications while offering active product status and RoHS compliance, eliminating obsolescence risk and regulatory compliance concerns.

For applications requiring RoHS compliance: Both 48247-000LF and 0945180100 meet current RoHS requirements. The 48247-000LF maintains the original series specification, while 0945180100 provides an alternative from a different connector category.

For cross-manufacturer applications: The Molex 0945180100 is suitable only when connector form factor and contact geometry are compatible with blade-type power connector systems. This part operates in a different connector category and should not be used as a direct socket contact replacement in rectangular connector assemblies.

Frequently Asked Questions (FAQ)

Q: Can 48247-000LF be used as a direct replacement for 48247-000?

A: Yes. The 48247-000LF maintains identical wire gauge (18-20 AWG), contact termination (crimp), contact finish (gold, 15.0µin thickness), and socket type specifications. The primary differences are product status (active vs. obsolete) and RoHS compliance.

Q: What are the key differences between 48247-000LF and 0945180100?

A: Both parts support 18-20 AWG wire gauge and crimp termination. However, 48247-000LF is a rectangular connector socket contact, while 0945180100 is a blade-type power connector female blade socket. These operate in different connector systems and are not interchangeable without connector assembly redesign.

Q: Is the 0945180100 suitable for Mini-PV™ series assemblies?

A: No. The 0945180100 is designed for blade-type power connector systems, not rectangular connectors. Use only within Molex High Normal Force (HNF) series blade connector assemblies.

Q: What packaging options are available for substitutes?

A: The 48247-000LF is supplied in Cut Tape (CT) packaging. The 0945180100 is supplied in Tape & Reel (TR) packaging. Packaging selection depends on assembly process requirements and volume specifications.

Q: Are there MSL or moisture sensitivity concerns with these substitutes?

A: All three parts carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions for storage or handling.