4816P-T02-472 Equivalent & Substitute Parts

Part Overview

The 4816P-T02-472 is a 15-resistor network array manufactured by Bourns Inc., featuring 4.7k Ohm resistors with ±2% tolerance in a 16-SOIC surface mount package. This component is designed for applications requiring integrated resistor networks with bussed circuit topology and automotive-grade reliability. The part is currently active in production with 880 pieces available in stock. Substitute parts are identified to address supply chain requirements, compliance updates, or packaging preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

4816P-T02-472

Bourns Inc.In Stock: 9494816P-T02-472 Datasheet

Current PartRFQ

4816P-T02-472LF

Bourns Inc.In Stock: 41154816P-T02-472LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4816P-T02-472 is determined by strict equivalence across the following critical parameters:

• Resistance value: 4.7k Ohm
• Tolerance: ±2%
• Number of resistors: 15
• Circuit topology: Bussed configuration
• Power per element: 80mW
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 125°C
• Package type: 16-SOIC (0.220", 5.59mm Width)
• Pin count: 16
• Mounting type: Surface Mount
• Physical dimensions: 0.440" L x 0.220" W (11.18mm x 5.59mm)
• Moisture sensitivity level: 1 (Unlimited)

The identified substitute part maintains full electrical and mechanical compatibility with the main part number while differing in RoHS compliance status and REACH classification.

Parameter Comparison

Engineering Selection Recommendations

Both the 4816P-T02-472 and 4816P-T02-472LF are electrically and mechanically identical, with all functional parameters matching exactly. The primary distinction lies in regulatory compliance:

The 4816P-T02-472LF carries ROHS3 compliance and REACH Unaffected status, making it the preferred selection for applications subject to European Union environmental regulations or customer specifications requiring RoHS3 certification. The "LF" suffix in the part number indicates lead-free termination, consistent with ROHS3 requirements.

The 4816P-T02-472 remains suitable for applications where RoHS compliance is not mandated or where legacy component specifications are maintained. Both parts are active in production and available in adequate quantities for supply chain planning.

Frequently Asked Questions (FAQ)

Q: Are the 4816P-T02-472 and 4816P-T02-472LF electrically interchangeable?

A: Yes. Both parts feature identical electrical specifications: 4.7k Ohm ±2% resistance, 15-resistor bussed configuration, 80mW power per element, ±100ppm/°C temperature coefficient, and -55°C to 125°C operating range.

Q: What does the "LF" suffix indicate?

A: The "LF" designation indicates lead-free termination and ROHS3 compliance. This affects material composition but not electrical performance or mechanical fit.

Q: Are the packages mechanically identical?

A: Yes. Both parts use the 16-SOIC (0.220", 5.59mm Width) package with identical physical dimensions (0.440" L x 0.220" W) and maximum seated height (0.094").

Q: Can I use 4816P-T02-472LF as a direct replacement for 4816P-T02-472 on existing PCBs?

A: Yes. The parts are pin-compatible and footprint-compatible. No PCB redesign is required.

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance or REACH compliance, use 4816P-T02-472LF. For applications without these requirements, either part is acceptable based on availability and cost considerations.

Q: Are both parts suitable for automotive applications?

A: Yes. Both parts carry Automotive AEC-Q200 qualification and are rated for the full automotive temperature range (-55°C to 125°C).

Q: What is the moisture sensitivity level for both parts?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity precautions are required during storage or handling.