Equivalent & Substitute Parts for Bourns 4816P-2-104LF

Part Overview

The Bourns 4816P-2-104LF is a 15-resistor network array with 100k ohm resistance values in a 16-SOIC surface mount package. This component is designed for applications requiring integrated resistor networks with bussed configuration and automotive-grade reliability. The part is currently in active production status with full RoHS3 compliance and AEC-Q200 automotive qualification. Substitute parts are identified to address packaging preferences, inventory availability, and performance envelope variations while maintaining electrical and mechanical compatibility.

Substiute Parts

4816P-2-104LF

Bourns Inc.In Stock: 34104816P-2-104LF Datasheet

Current PartRFQ

4816P-T02-104LF

Bourns Inc.In Stock: 18214816P-T02-104LF Datasheet

SimilarRFQ

767161104GP

CTS Resistor ProductsIn Stock: 3019767161104GP Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4816P-2-104LF is determined by the following critical parameters:

Electrical Compatibility Requirements:

• Resistance value: 100k ohm (exact match required)
• Tolerance: ±2% (exact match required)
• Number of resistors: 15 (exact match required)
• Circuit type: Bussed (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C to 125°C (exact match required)

Mechanical Compatibility Requirements:

• Package type: 16-SOIC (0.220", 5.59mm Width) (exact match required)
• Number of pins: 16 (exact match required)
• Mounting type: Surface Mount (exact match required)

Regulatory & Compliance Requirements:

• RoHS3 compliance (required for equivalent substitution)
• Moisture Sensitivity Level 1 (required for equivalent substitution)

Allowable Variations:

• Packaging format (Tape & Reel vs. Tube) does not affect electrical or mechanical compatibility
• Power per element may exceed the original specification without compromising functionality
• Manufacturer may differ provided all electrical and mechanical parameters are met

Parameter Comparison

Engineering Selection Recommendations

All three parts meet the core electrical and mechanical requirements for direct substitution. Selection should be based on the following factors:

4816P-2-104LF (Bourns) - Original Specification: Suitable for applications where tape and reel packaging is preferred for automated assembly processes. Maintains all specified electrical parameters with 80mW power per element rating.

4816P-T02-104LF (Bourns) - Packaging Alternative: Identical electrical and mechanical specifications to the original part. Tube packaging format provides an alternative for manual assembly or lower-volume applications. Both parts share the same base product number (4816P) and series designation (4800P), confirming design equivalence.

767161104GP (CTS Resistor Products) - Cross-Manufacturer Substitute: Meets all electrical and mechanical compatibility requirements. Provides higher power per element rating (100mW vs. 80mW), which extends the thermal performance envelope without affecting nominal operation. Suitable for applications requiring enhanced thermal margin or where CTS supply chain availability is preferred. Maintains identical package dimensions, pin count, and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the 4816P-T02-104LF be used as a direct replacement for the 4816P-2-104LF?

A: Yes. Both parts are manufactured by Bourns, share the same base product number (4816P), and have identical electrical specifications (100k ohm, ±2% tolerance, 15 resistors, bussed configuration, ±100ppm/°C temperature coefficient). The only difference is packaging format (Tube vs. Tape & Reel), which does not affect electrical or mechanical compatibility.

Q: Is the CTS 767161104GP compatible with the Bourns 4816P-2-104LF?

A: Yes. The CTS part meets all electrical and mechanical requirements: 100k ohm resistance, ±2% tolerance, 15-resistor bussed network, 16-SOIC package, identical pin count, and matching temperature coefficient and operating range. The increased power per element (100mW vs. 80mW) is a performance enhancement that does not compromise compatibility.

Q: Are there any height differences between these parts?

A: The seated height maximum for the Bourns parts is 0.094" (2.40mm), while the CTS part is 0.093" (2.36mm). This 0.01mm difference is within typical PCB assembly tolerances and does not affect mechanical compatibility or board-level performance.

Q: Do all three parts have the same compliance certifications?

A: Yes. All three parts are ROHS3 compliant, have Moisture Sensitivity Level 1 (Unlimited), and are rated for -55°C to 125°C operating temperature. The Bourns parts carry AEC-Q200 automotive qualification. All parts are currently in active production status.

Q: Which part should be selected for automotive applications?

A: The Bourns 4816P-2-104LF and 4816P-T02-104LF both carry explicit AEC-Q200 automotive qualification. The CTS 767161104GP meets all electrical and mechanical requirements for automotive use but does not list AEC-Q200 qualification in the provided specifications. For applications requiring documented automotive qualification, the Bourns parts are the specified choice.