Amphenol ICC 48116-000 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 48116-000 is a pin contact for rectangular connectors in the Mini-PV™ and Basics+ series, designed for 22-26 AWG wire gauges with gold plating and crimp termination. This component is classified as obsolete, making identification of compatible substitutes essential for ongoing system maintenance and new design implementations where equivalent functionality is required.

Substiute Parts

48116-000

Amphenol ICC (FCI)In Stock: 94748116-000 Datasheet

Current PartRFQ

L17HRD2M145G

Amphenol ICC (Commercial Products)In Stock: 1174L17HRD2M145G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part L17HRD2M145G is identified as a compatible alternative based on the following critical parameters:

Matching Criteria:

• Contact termination method: Crimp (both parts use crimp termination)
• Wire gauge compatibility: 24-28 AWG (overlaps with 22-26 AWG specification)
• Moisture sensitivity level: 1 (Unlimited) (identical environmental rating)
• ECCN and HTSUS classifications: EAR99 and 8536.90.4000 (regulatory alignment)
• Connector contact function: Pin contact for signal transmission

Substitution Logic: The L17HRD2M145G operates within compatible electrical and mechanical parameters for applications requiring crimp-terminated pin contacts. The wire gauge range of 24-28 AWG encompasses the upper portion of the 48116-000 specification (22-26 AWG), ensuring compatibility for wire sizes 24-26 AWG. Both components maintain identical moisture sensitivity ratings and regulatory classifications.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The 48116-000 is obsolete, while L17HRD2M145G is active and in production. Selection of the substitute part ensures access to current inventory and ongoing manufacturing support.

Compliance Alignment: The L17HRD2M145G achieves RoHS compliance, whereas the 48116-000 is non-compliant. For new designs or systems requiring regulatory compliance with modern environmental standards, the substitute part is the appropriate selection.

Regulatory Classification: Both parts share identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications, confirming regulatory compatibility for import, export, and trade purposes.

Wire Gauge Application: Applications utilizing wire gauges 24-26 AWG can directly employ the L17HRD2M145G. Applications requiring 22-23 AWG wire termination should verify mechanical compatibility or consider alternative solutions within the Amphenol ICC product portfolio.

Frequently Asked Questions (FAQ)

Q: Can L17HRD2M145G directly replace 48116-000 in all applications?

A: Direct replacement is applicable for applications using 24-26 AWG wire gauges with crimp termination. Applications specifically requiring 22-23 AWG wire accommodation should verify mechanical fit and contact retention specifications before implementation.

Q: What is the primary reason for substitution?

A: The 48116-000 is obsolete and no longer manufactured. The L17HRD2M145G is an active product from the same manufacturer family, providing equivalent crimp termination functionality with current production availability.

Q: Are there compliance differences between these parts?

A: Yes. The 48116-000 is RoHS non-compliant, while L17HRD2M145G is RoHS compliant. For applications subject to RoHS regulations or modern procurement standards, the substitute part is required.

Q: How do the contact finishes compare?

A: The 48116-000 specifies gold plating at 50.0µin (1.27µm) thickness. The L17HRD2M145G contact finish specification is not provided in the available data. Verify contact material and finish requirements for your specific application before selection.

Q: Are both parts rated for the same environmental conditions?

A: Yes. Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating identical environmental tolerance and storage requirements.

Q: What packaging is available for the substitute part?

A: The L17HRD2M145G is supplied in Tape & Reel (TR) packaging, suitable for automated assembly processes.