SCHURTER 4758.8200 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4758.8200 is an AC power entry connector receptacle designed for IEC 320-2-2/F panel mount applications. This component functions as a female socket power inlet rated for 10A at 250VAC, featuring snap-in panel mounting with quick connect termination. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for continued system support and new designs.

Substiute Parts

4758.8200

SCHURTER Inc.In Stock: 7024758.8200 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.8200

SCHURTER Inc.In Stock: 11374752.8200 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4758.8200 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Requirements:

• Connector style must be IEC 320-2-2/F
• Connector type must be receptacle with female sockets
• Current rating must be 10A minimum
• Voltage rating must be 250VAC minimum
• Number of positions must be 3 per connection (4)
• Filter type must be unfiltered - commercial

Mechanical Compatibility Requirements:

• Mounting type must be panel mount, snap-in
• Material flammability rating must be UL94 V-0
• Ingress protection must be IP30 or higher

Identified Substitutes: Two active SCHURTER alternatives meet these criteria: part number 0909.0021 (Series 909) and part number 4752.8200 (Series 4752). Both maintain identical electrical specifications and core mechanical mounting characteristics while differing in termination method and panel cutout dimensions.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred): Part number 4752.8200 is the primary substitute for the obsolete 4758.8200. Both components share identical termination methodology (quick connect 0.250"), matching panel thickness tolerance (0.047" / 1.20mm), and equivalent electrical ratings. The 4752.8200 maintains active product status with ROHS3 compliance and current regulatory certifications (CCC, ENEC 10), making it suitable for new designs and legacy system updates without circuit redesign.

Alternative Substitute (Termination Change Required): Part number 0909.0021 provides electrical and mechanical equivalence but requires circuit board modification due to solder eyelet termination instead of quick connect. This substitute is appropriate only when panel cutout dimensions can be adapted to the smaller 32.50mm x 96.30mm requirement and when solder termination is acceptable for the application. The 0909.0021 carries cULus and ENEC certifications with ROHS3 compliance.

Both substitutes are manufactured by SCHURTER Inc. and maintain the same IEC 320-2-2/F connector standard, 10A/250VAC electrical specification, and IP30 ingress protection as the original part.

Frequently Asked Questions (FAQ)

Q: Can the 4752.8200 be used as a direct replacement for the 4758.8200 without circuit modification? A: Yes. The 4752.8200 uses identical quick connect termination (0.250" / 6.3mm) and matching panel thickness (0.047" / 1.20mm). Panel cutout dimensions differ (96.20mm vs. 134.00mm), requiring mechanical panel adjustment but no electrical circuit changes.

Q: What is the primary difference between the 0909.0021 and 4752.8200 substitutes? A: The 0909.0021 uses solder eyelet termination while the 4752.8200 uses quick connect termination. The 0909.0021 also accommodates thicker panels (0.059" / 1.50mm maximum) and has a smaller panel cutout width (96.30mm vs. 96.20mm).

Q: Are both substitute parts currently available? A: Yes. The 4752.8200 has 1052 pieces in stock, and the 0909.0021 has 2180 pieces in stock as new original inventory.

Q: Do the substitute parts maintain the same electrical ratings as the original 4758.8200? A: Yes. Both substitutes are rated for 10A at 250VAC with IEC 320-2-2/F connector configuration, 3 positions per connection (4 total), and unfiltered commercial filter type.

Q: What regulatory certifications apply to the substitute parts? A: The 4752.8200 carries CCC and ENEC 10 approvals with ROHS3 compliance. The 0909.0021 carries cULus and ENEC approvals with ROHS3 compliance. Both maintain UL94 V-0 material flammability rating and IP30 ingress protection.

Q: Can panel cutout dimensions be modified to accommodate the substitute parts? A: Panel cutout modification is a mechanical design decision. The 4752.8200 requires a 32.50mm x 96.20mm rectangular cutout compared to the original 32.50mm x 134.00mm. The 0909.0021 requires 32.50mm x 96.30mm. Verify panel material thickness compatibility: 4752.8200 supports 0.047" (1.20mm), while 0909.0021 supports up to 0.059" (1.50mm).