SCHURTER 4758.7200 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4758.7200 is a Power Entry Connector Receptacle with IEC 320-2-2/F configuration, designed for panel-mount applications with snap-in installation. This component features female sockets rated for 10A at 250VAC, unfiltered commercial operation, and quick-connect termination with 0.250" (6.3mm) contacts.

The 4758.7200 is classified as Obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for applications requiring IEC 320-2-2/F receptacle functionality with compatible electrical and mechanical specifications.

Substiute Parts

4758.7200

SCHURTER Inc.In Stock: 7734758.7200 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.6200

SCHURTER Inc.In Stock: 13384752.6200 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 4758.7200 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Electrical Compatibility Criteria:

• Connector Style: IEC 320-2-2/F (identical)
• Connector Type: Receptacle, Female Sockets (identical)
• Current Rating: 10A (identical)
• Voltage Rating: 250VAC (identical)
• Number of Positions: 3 per connection (4) (identical)
• Filter Type: Unfiltered - Commercial (identical)

Mechanical Compatibility Criteria:

• Mounting Type: Panel Mount, Snap-In (identical)
• Material Flammability Rating: UL94 V-0 (identical)
• Ingress Protection: IP30 (identical)

Allowable Variations:

• Termination method (Quick Connect vs. Solder Eyelet)
• Panel cutout dimensions (within connector family specifications)
• Panel thickness tolerance
• Approval agency certifications (cURus, cULus, CCC, ENEC)
• Product status (Active substitutes for Obsolete)

The substitute parts 0909.0021 and 4752.6200 maintain all critical electrical and mechanical parameters while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

SCHURTER 0909.0021 is suitable for applications where solder eyelet termination is acceptable. This part is Active status with cULus and ENEC certifications, providing regulatory compliance for North American and European markets. The reduced panel cutout length (96.30mm vs. 134.00mm) and thinner panel thickness requirement (1.50mm) may require panel redesign considerations.

SCHURTER 4752.6200 maintains Quick Connect - 0.250" (6.3mm) termination identical to the main part, minimizing assembly process changes. This part is Active status with CCC and ENEC 10 certifications. The panel cutout dimensions (96.20mm length) and panel thickness (2.50mm) differ from the original, requiring panel modification assessment.

Both substitute parts satisfy the core electrical requirements (10A, 250VAC, IEC 320-2-2/F) and mechanical specifications (Panel Mount, Snap-In, UL94 V-0, IP30). Selection between substitutes depends on termination method compatibility and panel design constraints.

Frequently Asked Questions (FAQ)

Q: Can 0909.0021 and 4752.6200 be used interchangeably with 4758.7200?

A: Both parts maintain identical electrical specifications (10A, 250VAC, IEC 320-2-2/F receptacle configuration) and mechanical mounting (panel mount, snap-in). However, termination methods differ: 0909.0021 uses solder eyelet while 4758.7200 and 4752.6200 use quick-connect. Panel cutout dimensions also vary, requiring mechanical redesign assessment.

Q: What are the key differences between the two substitute parts?

A: The primary difference is termination method. 0909.0021 uses solder eyelet termination, while 4752.6200 uses quick-connect 0.250" (6.3mm) termination matching the original. Panel cutout dimensions differ slightly between both substitutes (96.30mm vs. 96.20mm length). Both maintain identical electrical ratings and safety certifications.

Q: Are there compliance or certification differences?

A: All three parts carry UL94 V-0 flammability rating and IP30 ingress protection. The main part carries cURus and ENEC approvals. 0909.0021 carries cULus and ENEC approvals. 4752.6200 carries CCC and ENEC 10 approvals. Selection depends on target market regulatory requirements.

Q: What panel modifications are required for substitution?

A: The original 4758.7200 requires a 32.50mm x 134.00mm rectangular cutout in 3.00mm panel thickness. Substitute 0909.0021 requires 32.50mm x 96.30mm cutout in 1.50mm panel thickness. Substitute 4752.6200 requires 32.50mm x 96.20mm cutout in 2.50mm panel thickness. Panel redesign is necessary for either substitute.

Q: Which substitute is recommended for new designs?

A: Selection depends on termination method requirements. For applications using quick-connect termination, 4752.6200 provides the closest match to the original 4758.7200. For applications where solder eyelet termination is acceptable, 0909.0021 offers an alternative. Both are Active status with current availability.