SCHURTER 4758.6000 Equivalent & Substitute Parts

Part Overview

The SCHURTER 4758.6000 is a power entry connector receptacle designed for IEC 320-2-2/F applications. This panel-mount, snap-in connector accommodates 10A at 250VAC with three positions per connection across four total positions. The unit features a carrier frame, one module, and a terminating cover with solder and quick connect termination options.

The 4758.6000 carries an obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for equipment utilizing this connector.

Key Parameters

Parameter	Value
Connector Style	IEC 320-2-2/F
Connector Type	Receptacle, Female Sockets
Current Rating	10A
Voltage Rating	250VAC
Number of Positions	3 per connection (4 total)
Mounting Type	Panel Mount, Snap-In
Filter Type	Unfiltered - Commercial
Material Flammability Rating	UL94 V-0
Ingress Protection	IP30

Substitute Part Grouping Explanation

Substitute parts for the SCHURTER 4758.6000 are qualified based on the following criteria:

Identical connector style (IEC 320-2-2/F)
Identical connector type (Receptacle, Female Sockets)
Matching current and voltage ratings (10A, 250VAC)
Matching position configuration (3 per connection, 4 total)
Panel mount, snap-in mounting method
Unfiltered commercial filter type
UL94 V-0 flammability rating
IP30 ingress protection rating

The substitute parts SCHURTER 0909.0021 and SCHURTER 4752.6200 meet all core electrical and mechanical parameters. Differences exist in termination method, panel cutout dimensions, and product status, which are documented in the comparison table below.

Parameter Comparison

Parameter	4758.6000	0909.0021	4752.6200
Connector Style	IEC 320-2-2/F	IEC 320-2-2/F	IEC 320-2-2/F
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Current Rating	10A	10A	10A
Voltage Rating	250VAC	250VAC	250VAC
Number of Positions	3 per connection (4)	3 per connection (4)	3 per connection (4)
Mounting Type	Panel Mount, Snap-In	Panel Mount, Snap-In	Panel Mount, Snap-In
Filter Type	Unfiltered - Commercial	Unfiltered - Commercial	Unfiltered - Commercial
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
Ingress Protection	IP30	IP30	IP30
Termination	Solder, Quick Connect - 0.250" (6.3mm)	Solder Eyelet	Quick Connect - 0.250" (6.3mm)
Panel Cutout Dimensions	32.50mm x 134.00mm	32.50mm x 96.30mm	32.50mm x 96.20mm
Panel Thickness	0.098" (2.50mm)	0.059" (1.50mm)	0.098" (2.50mm)
Product Status	Obsolete	Active	Active
Approval Agency	cURus, ENEC	cULus, ENEC	CCC, ENEC 10

Engineering Selection Recommendations

Both SCHURTER 0909.0021 and SCHURTER 4752.6200 are active products with current manufacturing status, making them suitable replacements for the obsolete 4758.6000.

SCHURTER 0909.0021 is recommended when solder eyelet termination is compatible with the application design. This part accommodates thinner panel installations (0.059" / 1.50mm) and carries cULus and ENEC certifications with ROHS3 compliance.

SCHURTER 4752.6200 is recommended when quick connect termination is required. This part maintains the same panel thickness specification (0.098" / 2.50mm) as the original 4758.6000 and includes a terminating cover. It carries CCC and ENEC 10 certifications with ROHS3 compliance.

Selection between these two substitutes depends on termination method compatibility with existing PCB or wiring infrastructure and panel thickness requirements of the target application.

Frequently Asked Questions (FAQ)

Q: Can SCHURTER 0909.0021 and SCHURTER 4752.6200 be used interchangeably with the 4758.6000?

A: Both parts share identical electrical ratings (10A, 250VAC) and connector geometry (IEC 320-2-2/F). Interchangeability depends on termination method compatibility. The 4758.6000 supports both solder and quick connect termination, while 0909.0021 uses solder eyelet and 4752.6200 uses quick connect only. Panel cutout dimensions also differ, requiring mechanical verification.

Q: What are the key differences in panel cutout dimensions?

A: The 4758.6000 specifies 32.50mm x 134.00mm, while both substitutes use 32.50mm x 96.30mm (0909.0021) and 32.50mm x 96.20mm (4752.6200). The width dimension is significantly smaller on the substitute parts. Panel modifications may be necessary if the original cutout cannot accommodate the substitute connector.

Q: Are there compliance differences between the substitute parts?

A: Yes. The 0909.0021 carries cULus and ENEC certifications, while the 4752.6200 carries CCC and ENEC 10 certifications. Both are ROHS3 compliant. The original 4758.6000 carries cURus and ENEC certifications. Verify that the selected substitute meets all regulatory requirements for the target market and application.

Q: What panel thickness is required for each part?

A: The 4758.6000 and 4752.6200 both require 0.098" (2.50mm) panel thickness. The 0909.0021 accommodates thinner panels at 0.059" (1.50mm). Confirm panel thickness compatibility before selection.

Q: Are both substitute parts currently in stock?

A: Yes. SCHURTER 0909.0021 has 2180 pieces in stock, and SCHURTER 4752.6200 has 1307 pieces in stock, both listed as new original inventory.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message