SCHURTER 4758.5000 Equivalent & Substitute Parts

Part Overview

The SCHURTER 4758.5000 is a power entry connector receptacle designed for IEC 320-2-2/F applications. This component functions as a female socket panel-mount connector rated for 10A at 250VAC in unfiltered commercial configurations. The part is classified as obsolete, necessitating identification of active equivalent models to maintain design continuity and ensure component availability for new production runs and field replacements.

Substiute Parts

4758.5000

SCHURTER Inc.In Stock: 11794758.5000 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.5000

SCHURTER Inc.In Stock: 12384752.5000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4758.5000 is determined by strict alignment of the following parameters:

• Connector Style: IEC 320-2-2/F (exact match required)
• Connector Type: Receptacle, Female Sockets (exact match required)
• Current Rating: 10A (exact match required)
• Voltage Rating: 250VAC (exact match required)
• Number of Positions: 3 per connection (4) (exact match required)
• Mounting Type: Panel Mount, Snap-In (exact match required)
• Material Flammability Rating: UL94 V-0 (exact match required)
• Ingress Protection: IP30 (exact match required)

Both identified substitute parts meet all mandatory electrical and mechanical parameters. Variations in termination type, panel cutout dimensions, and approval agency certifications do not affect functional interchangeability within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are classified as active products, ensuring ongoing availability and manufacturing support. The SCHURTER 4752.5000 maintains identical termination specifications (Solder, Quick Connect - 0.250") to the obsolete 4758.5000, minimizing design modification requirements. The SCHURTER 0909.0021 employs Solder Eyelet termination, which represents a functional alternative within the same connector family. Both substitutes carry ENEC certification, meeting European regulatory requirements. The 4752.5000 additionally holds CCC certification, providing expanded market compliance. Selection between substitutes should be based on termination compatibility with existing PCB or wiring harness designs.

Frequently Asked Questions (FAQ)

Q: Can SCHURTER 0909.0021 and 4752.5000 be used interchangeably with the obsolete 4758.5000?

A: Both parts are functionally equivalent within the specified electrical and mechanical parameters (10A, 250VAC, IEC 320-2-2/F, IP30, UL94 V-0). Termination type differences require verification against your specific assembly process and PCB design.

Q: What is the primary difference between the two substitute parts?

A: The SCHURTER 0909.0021 uses Solder Eyelet termination, while the 4752.5000 uses Solder with Quick Connect - 0.250" termination. The 4752.5000 more closely matches the original 4758.5000 termination specification.

Q: Are there panel cutout dimension differences between these parts?

A: Yes. The 4758.5000 requires a 32.50mm x 134.00mm rectangular cutout. Both substitutes use 32.50mm width but differ in length (0909.0021: 96.30mm; 4752.5000: 96.20mm). Panel redesign may be necessary depending on existing mechanical constraints.

Q: Do all three parts meet the same safety certifications?

A: All three parts carry UL94 V-0 flammability rating and ENEC certification. The 4758.5000 and 0909.0021 hold cURus/cULus certification respectively. The 4752.5000 holds CCC and ENEC 10 certification, providing additional regional compliance.

Q: Which substitute should I select for new designs?

A: The SCHURTER 4752.5000 is recommended for new designs due to matching termination type with the original 4758.5000, active product status, and comprehensive certification coverage (CCC, ENEC 10).