SCHURTER 4758.4400 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4758.4400 is a Power Entry Connector Receptacle featuring IEC 320-2-2/F female sockets for panel mount, snap-in installation. This component is rated for 10A at 250VAC and is designed for unfiltered commercial applications. The part is currently listed as obsolete, making equivalent substitute parts necessary for ongoing system maintenance and new design implementations where this connector type is required.

Substiute Parts

4758.4400

SCHURTER Inc.In Stock: 7964758.4400 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.4400

SCHURTER Inc.In Stock: 9274752.4400 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SCHURTER 4758.4400 are qualified based on the following critical parameters that must remain constant:

• Connector Style: IEC 320-2-2/F
• Connector Type: Receptacle, Female Sockets
• Current Rating: 10A
• Voltage Rating: 250VAC
• Number of Positions: 3 per connection (4)
• Mounting Type: Panel Mount, Snap-In
• Termination: Solder Eyelet
• Material Flammability Rating: UL94 V-0
• Ingress Protection: IP30

The identified substitute parts (0909.0021 and 4752.4400) maintain all critical electrical and mechanical parameters. Variations in panel cutout dimensions and feature sets do not affect functional compatibility for applications requiring this connector specification.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts (0909.0021 and 4752.4400) are active products from SCHURTER Inc. and maintain full electrical and mechanical compatibility with the obsolete 4758.4400. Selection between substitutes should be based on:

0909.0021: Suitable for applications where panel cutout dimensions of 32.50mm x 96.30mm accommodate the installation space. This part carries cULus and ENEC approvals.

4752.4400: Suitable for applications where panel cutout dimensions of 32.50mm x 96.20mm accommodate the installation space. This part carries CCC and ENEC 10 approvals in addition to cULus certification.

Both parts are ROHS3 compliant and REACH unaffected. The primary differentiation factor is the panel cutout dimension and specific approval agency certifications required for the target application region.

Frequently Asked Questions (FAQ)

Q: Can 0909.0021 or 4752.4400 directly replace 4758.4400 in existing designs?

A: Both parts maintain identical electrical ratings (10A, 250VAC), connector style (IEC 320-2-2/F), and mounting method (panel mount, snap-in). Direct replacement is possible provided the panel cutout dimensions accommodate the substitute part's specifications.

Q: What is the primary difference between the substitute parts?

A: The main differences are panel cutout dimensions (0909.0021: 32.50mm x 96.30mm; 4752.4400: 32.50mm x 96.20mm) and approval agency certifications. Both maintain identical electrical and mechanical performance characteristics.

Q: Are there packaging differences between these parts?

A: The 4758.4400 is supplied in standard packaging, while both 0909.0021 and 4752.4400 are supplied in bulk packaging. This does not affect component functionality or performance.

Q: Do all three parts meet the same compliance standards?

A: All three parts are ROHS3 compliant and REACH unaffected. Approval agencies differ: 4758.4400 and 0909.0021 carry cULus and ENEC approvals, while 4752.4400 carries CCC, ENEC 10, and cULus approvals.

Q: What inventory status should influence part selection?

A: 0909.0021 has 2180 units in stock, 4752.4400 has 851 units in stock, and 4758.4400 (obsolete) has 743 units remaining. For new designs, selection should prioritize active products (0909.0021 or 4752.4400) to ensure long-term availability.