SCHURTER 4754.8400 Equivalent & Substitute Parts

Part Overview

The SCHURTER 4754.8400 is a Power Entry Connector Receptacle with IEC 320-2-2/F configuration, designed for panel-mount applications with snap-in installation. This component features female sockets rated for 10A at 250VAC, unfiltered commercial operation, and solder eyelet termination. The part is currently classified as obsolete, making identification of active equivalent models essential for ongoing procurement and system maintenance.

Substiute Parts

4754.8400

SCHURTER Inc.In Stock: 10954754.8400 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.8200

SCHURTER Inc.In Stock: 11374752.8200 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4754.8400 is determined by strict equivalence across the following parameters: connector style (IEC 320-2-2/F), connector type (receptacle with female sockets), current rating (10A), voltage rating (250VAC), position count (3 per connection with 4 total), mounting method (panel mount snap-in), and material flammability rating (UL94 V-0). All identified substitutes maintain these core electrical and mechanical specifications. Variations in panel cutout dimensions, termination method, and approval agencies are secondary considerations that do not affect functional compatibility within the specified electrical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both SCHURTER 0909.0021 and SCHURTER 4752.8200 are active product alternatives to the obsolete 4754.8400, maintaining full electrical and mechanical compatibility across all critical parameters. The 0909.0021 preserves solder eyelet termination identical to the main part, while the 4752.8200 employs quick-connect termination with a terminating cover feature. Selection between these substitutes depends on termination method requirements within the target application. The 4752.8200 offers CCC and ENEC 10 certifications with ROHS3 compliance, while the 0909.0021 provides cULus and ENEC certifications with ROHS3 compliance. Both parts accommodate the specified panel thickness range and maintain UL94 V-0 flammability ratings and IP30 ingress protection.

Frequently Asked Questions (FAQ)

Q: Can SCHURTER 0909.0021 or 4752.8200 directly replace the obsolete 4754.8400?

A: Both parts maintain electrical equivalence across current rating (10A), voltage rating (250VAC), connector style (IEC 320-2-2/F), and mounting configuration (panel mount snap-in). Termination method differs: 0909.0021 uses solder eyelet matching the original, while 4752.8200 uses quick-connect termination. Panel cutout dimensions vary slightly, requiring verification against existing panel specifications.

Q: What are the key differences between the two substitute parts?

A: The primary difference is termination method. The 0909.0021 features solder eyelet termination identical to the 4754.8400, while the 4752.8200 uses quick-connect 0.250" (6.3mm) termination with a terminating cover. Panel cutout dimensions differ marginally (0909.0021: 96.30mm length; 4752.8200: 96.20mm length), both narrower than the original 122.10mm. Approval certifications also differ between the two models.

Q: Are there packaging considerations for these substitutes?

A: The 0909.0021 is supplied in bulk packaging with 2180 pieces in stock. The 4752.8200 is supplied in bulk packaging with 1052 pieces in stock. Both are available as new original inventory from SCHURTER Inc.

Q: Do the substitute parts meet the same compliance standards?

A: Both substitutes maintain UL94 V-0 material flammability rating and IP30 ingress protection. The 0909.0021 holds cULus and ENEC certifications with ROHS3 compliance. The 4752.8200 holds CCC and ENEC 10 certifications with ROHS3 compliance. Compliance requirements for your specific application should determine the appropriate selection.