SCHURTER 4754.6000 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4754.6000 is a power entry connector receptacle designed for IEC 320-2-2/F applications. This component features female sockets for panel-mount, snap-in installation with a 10A current rating at 250VAC. The product is classified as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations where equivalent functionality is required.

Substiute Parts

4754.6000

SCHURTER Inc.In Stock: 8994754.6000 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4754.6000 is determined by strict equivalence across the following critical parameters:

• Connector Style & Type: Must be IEC 320-2-2/F receptacle with female sockets
• Electrical Ratings: Current rating of 10A and voltage rating of 250VAC are mandatory
• Position Configuration: 3 per connection (4) positions required
• Mounting Method: Panel mount, snap-in installation required
• Filter Classification: Unfiltered - Commercial designation
• Safety Compliance: UL94 V-0 flammability rating and IP30 ingress protection

The SCHURTER 0909.0021 meets all substitution criteria across these parameters, establishing it as a direct functional equivalent despite differences in packaging, panel cutout dimensions, and termination method.

Parameter Comparison

Engineering Selection Recommendations

The SCHURTER 0909.0021 is the qualified substitute for the obsolete SCHURTER 4754.6000. Both components share identical electrical and mechanical specifications across all critical substitution parameters: connector style, current/voltage ratings, position configuration, mounting method, and safety ratings.

The 0909.0021 carries active product status with current manufacturing availability (2180 pcs in stock), whereas the 4754.6000 is obsolete. The substitute maintains equivalent compliance certifications (cULus, ENEC) and REACH compliance status. The 0909.0021 additionally carries RoHS3 compliance, providing enhanced environmental regulatory alignment.

Differences in panel cutout dimensions (96.30mm vs. 122.10mm), panel thickness tolerance (1.50mm vs. 2.50mm), and termination method (Solder Eyelet vs. Solder, Quick Connect) are design-specific considerations that must be evaluated against individual application requirements and panel specifications.

Frequently Asked Questions (FAQ)

Q: Can the SCHURTER 0909.0021 directly replace the 4754.6000 in existing applications?

A: The 0909.0021 is electrically and mechanically equivalent across all critical parameters. Panel cutout dimensions and termination method differences require verification against specific panel design and wiring specifications before implementation.

Q: What are the key differences between these two connectors?

A: The primary differences are panel cutout dimensions (0909.0021: 96.30mm vs. 4754.6000: 122.10mm), panel thickness tolerance (0909.0021: 1.50mm vs. 4754.6000: 2.50mm), termination method (0909.0021: Solder Eyelet vs. 4754.6000: Solder, Quick Connect), and product status (0909.0021: Active vs. 4754.6000: Obsolete). Electrical and safety specifications are identical.

Q: Are there any compliance differences between the substitute and the original part?

A: Both components maintain REACH compliance and UL94 V-0 flammability rating. The 0909.0021 carries cULus and ENEC certifications with RoHS3 compliance, while the 4754.6000 carries CCC, cURus, and VDE certifications. Application-specific regulatory requirements should be confirmed.

Q: What is the inventory status of the substitute part?

A: The SCHURTER 0909.0021 has 2180 pcs of new original stock available, compared to 795 pcs for the obsolete 4754.6000.

Q: Does the termination method difference affect compatibility?

A: Termination method (Solder Eyelet vs. Solder, Quick Connect) is a wiring and assembly consideration. Compatibility depends on the specific wiring harness and panel assembly design. This difference must be evaluated during implementation planning.