SCHURTER 4754.5000.08 Equivalent & Substitute Parts

Part Overview

The SCHURTER 4754.5000.08 is a power entry connector receptacle designed for IEC 320-2-2/F applications. This component features female sockets with panel mount, snap-in installation and accommodates 10A at 250VAC. The part is classified as obsolete, necessitating identification of active equivalent models to maintain supply chain continuity for applications requiring this connector style and electrical specification.

Substiute Parts

4754.5000.08

SCHURTER Inc.In Stock: 7044754.5000.08 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.5000

SCHURTER Inc.In Stock: 12384752.5000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4754.5000.08 is determined by the following mandatory parameters:

• Connector style must be IEC 320-2-2/F
• Connector type must be receptacle with female sockets
• Current rating must be 10A
• Voltage rating must be 250VAC
• Mounting type must be panel mount, snap-in
• Number of positions must be 3 per connection (4)
• Filter type must be unfiltered - commercial
• Material flammability rating must be UL94 V-0
• Ingress protection must be IP30

The identified substitute parts meet all mandatory electrical and mechanical parameters. Variations in termination method, panel cutout dimensions, and product status are secondary considerations that do not affect functional equivalence for the specified application.

Parameter Comparison

Engineering Selection Recommendations

Both SCHURTER 0909.0021 and SCHURTER 4752.5000 are active products that satisfy all mandatory electrical and mechanical parameters for substitution of the obsolete 4754.5000.08.

SCHURTER 4752.5000 is the preferred substitute when panel cutout dimensions and panel thickness specifications match the original design. This part maintains identical termination capability (Solder, Quick Connect - 0.250") and panel thickness (0.079" / 2.00mm) as the main part, minimizing mechanical redesign requirements. The 4752.5000 carries CCC and ENEC 10 certifications with ROHS3 compliance.

SCHURTER 0909.0021 is suitable for applications where panel cutout dimensions can be modified to accommodate the smaller rectangular opening (32.50mm x 96.30mm) and where panel thickness tolerance allows for 0.059" (1.50mm) material. This part features Solder Eyelet termination and carries cULus and ENEC certifications with ROHS3 compliance. Higher inventory availability (2180 Pcs) may support expedited procurement.

Both substitutes maintain the same electrical performance (10A, 250VAC), connector configuration, and safety ratings (UL94 V-0, IP30) as the original part.

Frequently Asked Questions (FAQ)

Q: Can SCHURTER 0909.0021 and 4752.5000 be used interchangeably with 4754.5000.08?

A: Both parts meet the mandatory electrical and mechanical parameters (IEC 320-2-2/F, 10A, 250VAC, panel mount snap-in, UL94 V-0, IP30). Interchangeability depends on panel cutout dimensions and termination method compatibility with the application. Panel modifications may be required for 0909.0021 due to different cutout dimensions.

Q: What is the primary difference between the two substitute parts?

A: The main differences are termination method and panel cutout dimensions. SCHURTER 4752.5000 uses Solder, Quick Connect - 0.250" termination with panel cutout 32.50mm x 96.20mm. SCHURTER 0909.0021 uses Solder Eyelet termination with panel cutout 32.50mm x 96.30mm. Both support the same electrical specifications.

Q: Are there compliance differences between the substitutes?

A: SCHURTER 4752.5000 carries CCC and ENEC 10 certifications. SCHURTER 0909.0021 carries cULus and ENEC certifications. Both are ROHS3 compliant and REACH unaffected. Selection should align with regional regulatory requirements for the target application.

Q: Does panel thickness affect substitution?

A: Panel thickness tolerance is application-specific. The main part and 4752.5000 accommodate 0.079" (2.00mm) panels. The 0909.0021 accommodates 0.059" (1.50mm) panels. Verify panel thickness compatibility before selection.

Q: What inventory status should influence the selection decision?

A: SCHURTER 4754.5000.08 is obsolete with 672 Pcs in stock. SCHURTER 4752.5000 has 1162 Pcs available. SCHURTER 0909.0021 has 2180 Pcs available. Procurement timeline and supply continuity requirements may favor the higher-inventory option.