SCHURTER 4754.5000 Equivalent & Substitute Parts

Part Overview

The SCHURTER 4754.5000 is a power entry connector receptacle designed for IEC 320-2-2/F applications. This component features female sockets with panel mount, snap-in installation and is rated for 10A at 250VAC. The part is classified as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations. Active equivalent models are available from the same manufacturer with compatible electrical and mechanical specifications.

Substiute Parts

4754.5000

SCHURTER Inc.In Stock: 11554754.5000 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.5000

SCHURTER Inc.In Stock: 12384752.5000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SCHURTER 4754.5000 are qualified based on the following criteria:

Electrical Compatibility: All substitute parts maintain identical current rating (10A) and voltage rating (250VAC), ensuring direct functional equivalence in power delivery applications.

Mechanical Compatibility: Substitute parts share the same connector style (IEC 320-2-2/F), connector type (receptacle, female sockets), mounting method (panel mount, snap-in), and position configuration (3 per connection with 4 total positions).

Environmental & Safety Standards: All substitute parts maintain UL94 V-0 flammability rating and IP30 ingress protection, meeting the same environmental and safety requirements as the original component.

Key Differentiators: Substitutes vary in panel cutout dimensions, panel thickness tolerance, termination method, and product status (active vs. obsolete). These differences are documented to enable informed selection based on specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred): The SCHURTER 4752.5000 is the primary substitute for the 4754.5000. Both parts share identical panel thickness (0.079" / 2.00mm), identical termination method (Solder, Quick Connect - 0.250"), and matching approval agencies (CCC, ENEC). The 4752.5000 is active status and ROHS3 compliant, providing long-term supply assurance. Panel cutout dimensions differ slightly (96.20mm vs. 122.10mm), requiring panel modification assessment.

For Alternative Applications: The SCHURTER 0909.0021 provides electrical and mechanical equivalence with different termination (Solder Eyelet) and panel thickness (0.059" / 1.50mm). This part is active status and ROHS3 compliant. The reduced panel thickness and different cutout dimensions (96.30mm) necessitate panel design evaluation. Approval agencies differ (cULus, ENEC vs. CCC, cURus, VDE), requiring compliance verification for specific regulatory jurisdictions.

Supply Continuity: Both substitute parts maintain active product status, ensuring availability for ongoing procurement. The 4754.5000 obsolete status makes transition to an active equivalent necessary for future system support.

Frequently Asked Questions (FAQ)

Q: Can the 4752.5000 directly replace the 4754.5000 in existing installations?

A: Electrical and mechanical compatibility is confirmed. Panel cutout dimensions differ (96.20mm vs. 122.10mm), requiring assessment of existing panel mounting holes. Termination method is identical, supporting direct connection compatibility.

Q: What is the primary difference between the 0909.0021 and 4752.5000 substitutes?

A: The 0909.0021 uses Solder Eyelet termination versus the 4752.5000 Solder, Quick Connect termination. Panel thickness differs (1.50mm vs. 2.00mm), and panel cutout dimensions vary slightly (96.30mm vs. 96.20mm). Approval agencies also differ, with 0909.0021 holding cULus and ENEC certifications versus 4752.5000 holding CCC and ENEC 10.

Q: Are both substitute parts ROHS3 compliant?

A: Yes. Both the 0909.0021 and 4752.5000 are ROHS3 compliant. The original 4754.5000 does not specify RoHS status.

Q: What approval agencies are relevant for my application?

A: The 4754.5000 holds CCC, cURus, and VDE approvals. The 4752.5000 holds CCC and ENEC 10. The 0909.0021 holds cULus and ENEC. Select the substitute based on required regulatory certifications for your target market.

Q: Do panel cutout dimension differences affect compatibility?

A: Panel cutout dimensions differ across all three parts. Existing panel mounting holes designed for the 4754.5000 (32.50mm x 122.10mm) will not align with substitute parts (96.20mm or 96.30mm width). Panel modification or new panel fabrication is required for physical installation.