SCHURTER 4754.4400 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4754.4400 is a power entry connector receptacle designed for IEC 320-2-2/F panel mount applications. This component features female sockets with a 10A current rating at 250VAC, utilizing snap-in panel mounting with solder eyelet termination. The part is classified as obsolete, making identification of equivalent substitute components essential for ongoing system support and new design implementations. Active alternatives are available from the same manufacturer with compatible electrical and mechanical specifications.

Substiute Parts

4754.4400

SCHURTER Inc.In Stock: 7134754.4400 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.4200

SCHURTER Inc.In Stock: 48534752.4200 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SCHURTER 4754.4400 are identified based on strict electrical and mechanical compatibility criteria. The following parameters must match or be equivalent for substitution:

Critical Matching Parameters:

• Connector Style: IEC 320-2-2/F
• Connector Type: Receptacle, Female Sockets
• Current Rating: 10A
• Voltage Rating: 250VAC
• Mounting Type: Panel Mount, Snap-In
• Number of Positions: 3 per connection (4)
• Filter Type: Unfiltered - Commercial
• Material Flammability Rating: UL94 V-0
• Ingress Protection: IP30
• Panel Thickness: 0.059" (1.50mm)

Allowable Variations:

• Panel Cutout Dimensions: Minor dimensional differences acceptable within mechanical design constraints
• Termination Type: Alternative termination methods (Quick Connect vs. Solder Eyelet) permitted if electrical performance remains equivalent
• Product Status: Active alternatives acceptable for obsolete parts
• Packaging: Bulk or standard packaging formats interchangeable
• Approval Agencies: Equivalent certifications acceptable (cULus, ENEC, CCC)

Parameter Comparison

Engineering Selection Recommendations

SCHURTER 0909.0021 is a direct electrical and mechanical equivalent with active product status. This part maintains identical current and voltage ratings, connector configuration, and panel thickness specifications. The primary dimensional difference is the panel cutout length (96.30mm vs. 122.10mm), which requires panel redesign consideration. Termination remains solder eyelet, ensuring compatibility with existing wiring practices. Approval certifications (cULus, ENEC) provide equivalent regulatory compliance for most applications.

SCHURTER 4752.4200 provides electrical equivalence with an alternative termination method (Quick Connect 0.250" vs. Solder Eyelet). This part is suitable for applications where quick-connect termination is acceptable or preferred. Panel cutout dimensions (32.50mm x 96.20mm) are comparable to the 0909.0021 variant. The inclusion of a terminating cover and active product status support long-term availability. Approval certifications (CCC, ENEC 10) meet regulatory requirements.

Selection between substitute parts depends on termination method requirements and panel cutout accommodation. Both alternatives provide equivalent electrical performance and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the 0909.0021 be used as a direct replacement for the 4754.4400?

A: Electrical and mechanical specifications are equivalent. The primary consideration is panel cutout dimensions: the 0909.0021 requires a 32.50mm x 96.30mm rectangular opening, while the 4754.4400 specifies 32.50mm x 122.10mm. Panel modification is necessary if the existing cutout cannot accommodate the smaller dimension.

Q: What is the difference between the 0909.0021 and 4752.4200?

A: Both parts maintain identical electrical ratings (10A, 250VAC) and connector configuration. The key difference is termination: the 0909.0021 uses solder eyelet termination, while the 4752.4200 uses quick-connect 0.250" (6.3mm) termination. Panel cutout dimensions are similar (96.30mm vs. 96.20mm). Selection depends on wiring termination method compatibility.

Q: Are all three parts RoHS compliant?

A: Yes. The 4754.4400, 0909.0021, and 4752.4200 are all ROHS3 compliant. REACH status is unaffected for all variants.

Q: What approval certifications apply to these connectors?

A: The 4754.4400 carries CCC, cURus, and ENEC approvals. The 0909.0021 is certified by cULus and ENEC. The 4752.4200 holds CCC and ENEC 10 certifications. All certifications meet standard regulatory requirements for AC power connectors in their respective markets.

Q: Can I use the 4752.4200 if my application requires solder eyelet termination?

A: No. The 4752.4200 is designed exclusively for quick-connect 0.250" (6.3mm) termination. If solder eyelet termination is required, use the 0909.0021 or source the original 4754.4400 if available.

Q: What is the ingress protection rating for these connectors?

A: All three parts maintain IP30 ingress protection, providing protection against solid objects greater than 2.5mm and water spray at any angle.