SCHURTER 4754.3000 Equivalent & Substitute Parts

Part Overview

The SCHURTER 4754.3000 is a power entry connector receptacle designed for IEC 320-2-2/F applications. This component functions as a female socket panel-mount connector rated for 10A at 250VAC in unfiltered commercial configurations. The part is classified as obsolete, necessitating identification of active equivalent models to maintain supply chain continuity and ensure design compatibility in new procurement cycles.

Substiute Parts

4754.3000

SCHURTER Inc.In Stock: 11504754.3000 Datasheet

Current PartRFQ

0909.0021

SCHURTER Inc.In Stock: 22100909.0021 Datasheet

SimilarRFQ

4752.3000

SCHURTER Inc.In Stock: 12254752.3000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4754.3000 is determined by strict equivalence across the following parameters:

• Connector style and type (IEC 320-2-2/F receptacle, female sockets)
• Electrical ratings (10A, 250VAC)
• Mechanical configuration (panel mount, snap-in, 3 positions per connection)
• Safety compliance (UL94 V-0 flammability rating, IP30 ingress protection)

The identified substitute parts maintain these core specifications while differing in secondary attributes such as termination method, panel cutout dimensions, and approval agency certifications. Both substitute parts are active products with current manufacturing status, addressing the obsolescence of the original component.

Parameter Comparison

Engineering Selection Recommendations

Both SCHURTER 4752.3000 and 0909.0021 are active products suitable for replacing the obsolete 4754.3000 in applications requiring IEC 320-2-2/F receptacle connectors at 10A, 250VAC.

The 4752.3000 maintains identical termination specifications (Solder, Quick Connect - 0.250") and panel thickness (0.039") to the original part, with panel cutout dimensions of 32.50mm x 96.20mm. This part carries CCC and ENEC 10 certifications and is RoHS3 compliant.

The 0909.0021 differs in termination method (Solder Eyelet) and panel thickness (0.059"), with panel cutout dimensions of 32.50mm x 96.30mm. This part carries cULus and ENEC certifications and is RoHS3 compliant.

Selection between these substitutes depends on PCB layout compatibility, panel thickness specifications, and termination method requirements for the target application. Both parts satisfy the core electrical and mechanical requirements of the original component.

Frequently Asked Questions (FAQ)

Q: Can the 4752.3000 and 0909.0021 be used interchangeably with the 4754.3000?

A: Both parts maintain electrical equivalence (10A, 250VAC, IEC 320-2-2/F receptacle configuration). However, panel cutout dimensions and termination methods differ. The 4752.3000 is mechanically closer to the original with matching panel thickness and quick-connect termination. The 0909.0021 requires panel thickness of 0.059" and uses solder eyelet termination. Verify panel specifications before selection.

Q: What is the primary difference between the 4752.3000 and 0909.0021?

A: The 4752.3000 uses Solder, Quick Connect - 0.250" termination with 0.039" panel thickness. The 0909.0021 uses Solder Eyelet termination with 0.059" panel thickness. Panel cutout dimensions are similar but not identical (96.20mm vs. 96.30mm). Termination method compatibility with existing PCB designs is the critical selection factor.

Q: Are both substitute parts RoHS compliant?

A: Yes, both the 4752.3000 and 0909.0021 are RoHS3 compliant. The original 4754.3000 has undefined RoHS status due to its obsolete classification.

Q: What certifications apply to each substitute part?

A: The 4752.3000 carries CCC and ENEC 10 certifications. The 0909.0021 carries cULus and ENEC certifications. The original 4754.3000 carried CCC, cURus, and VDE certifications. Verify that the selected substitute meets all required regulatory approvals for the target market.

Q: How do panel cutout dimensions affect substitution?

A: Panel cutout dimensions determine mechanical fit in existing enclosures. The 4754.3000 requires 32.50mm x 122.10mm. The 4752.3000 requires 32.50mm x 96.20mm, and the 0909.0021 requires 32.50mm x 96.30mm. Existing panel cutouts designed for the original part may require modification to accommodate either substitute.