Amphenol ICC 47445-000LF Socket Contact Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 47445-000LF is an active socket contact terminal designed for the Mini-PV™ and Basics+ connector series. This component is a tin-plated crimp socket contact rated for 22-26 AWG wire gauges. The part is RoHS Compliant and carries an MSL rating of 1 (Unlimited), indicating suitability for standard storage and handling conditions. Finding equivalent or substitute parts may be necessary due to inventory constraints, supply chain considerations, or specific application requirements where compatible alternatives meet the same electrical and mechanical specifications.

Substiute Parts

47445-000LF

Amphenol ICC (FCI)In Stock: 526047445-000LF Datasheet

Current PartRFQ

60940-1

TE Connectivity AMP ConnectorsIn Stock: 268160940-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Amphenol ICC 47445-000LF is determined by the following critical parameters:

• Contact Type: Socket (female, receptacle)
• Wire Gauge Compatibility: 20-24 AWG or 22-26 AWG
• Termination Method: Crimp
• Contact Finish: Tin plating
• RoHS Compliance: RoHS3 or RoHS Compliant status
• Moisture Sensitivity Level: MSL 1 (Unlimited)
• Packaging Format: Cut Tape (CT)

The TE Connectivity AMP Connectors part number 60940-1 qualifies as a manufacturer-recommended substitute. This terminal contact operates within the overlapping wire gauge range (20-24 AWG vs. 22-26 AWG), maintains crimp termination compatibility, and shares identical RoHS and MSL certifications. Both components are classified as rectangular connector terminals with tin contact finish and are suitable for equivalent electrical and mechanical applications within their specified wire gauge parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 47445-000LF and TE Connectivity 60940-1 are active products with current manufacturing status. Selection between these components should be based on the following criteria:

Primary Consideration: Wire gauge application requirements. The 47445-000LF is optimized for 22-26 AWG wire, while the 60940-1 accommodates 20-24 AWG wire. Verify that the substitute part's wire gauge range encompasses the intended application wire size.

Compliance Alignment: Both parts maintain equivalent RoHS compliance status (RoHS Compliant and ROHS3 Compliant respectively) and identical MSL ratings. Both are suitable for applications requiring unrestricted moisture sensitivity handling.

Termination and Finish: Both components utilize crimp termination with tin contact finish, ensuring electrical and mechanical compatibility within the overlapping wire gauge range.

Inventory and Availability: The 47445-000LF maintains 5151 pieces in stock, while the 60940-1 has 2615 pieces available. Selection may be influenced by supply chain requirements and lead time considerations.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 60940-1 directly replace the Amphenol ICC 47445-000LF in all applications?

A: Direct substitution is valid only when the application wire gauge falls within the 20-24 AWG range, which overlaps with the 47445-000LF specification of 22-26 AWG. Applications using 25-26 AWG wire require the original 47445-000LF part.

Q: Are there differences in contact material between these two parts?

A: The 60940-1 specifies phosphor bronze contact material with tin plating. The 47445-000LF contact material is not specified in the provided data. Both maintain tin contact finish for equivalent electrical performance within their respective wire gauge ranges.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both parts are RoHS compliant (RoHS Compliant and ROHS3 Compliant respectively), carry MSL 1 (Unlimited) ratings, and are classified as active products. Both are suitable for standard industrial and commercial applications without special moisture sensitivity handling requirements.

Q: What is the significance of the wire gauge overlap between these parts?

A: The wire gauge overlap (22-24 AWG) represents the range where either part can be used interchangeably. For applications using 22-24 AWG wire, both parts are functionally equivalent. For 20-21 AWG applications, only the 60940-1 is suitable. For 25-26 AWG applications, only the 47445-000LF is suitable.

Q: Are both parts available in Cut Tape packaging?

A: Yes. Both the 47445-000LF and 60940-1 are supplied in Cut Tape (CT) packaging format, ensuring compatibility with standard component handling and assembly processes.