3M 4634-7005 Equivalent & Substitute Parts

Part Overview

The 3M 4634-7005 is a 34-position rectangular plug connector with IDC (Insulation Displacement Contact) termination, designed for discrete or ribbon cable applications with wire gauges of 26-28 AWG. This connector features gold-plated contacts and is part of the 3M 4600 series. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative connector options that maintain electrical and mechanical compatibility.

Substiute Parts

4634-7005

3MIn Stock: 7484634-7005 Datasheet

Current PartRFQ

4634-6000

3MIn Stock: 11114634-6000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The 3M 4634-6000 is identified as a substitute for the 4634-7005 based on strict parameter equivalence across all critical electrical and mechanical specifications. Both connectors share identical core characteristics: 34-position configuration, 0.100" (2.54mm) pitch, 2-row layout with 0.100" row spacing, IDC termination method, 26-28 AWG wire gauge compatibility, gold contact finish at 30.0µin thickness, and gray color. Both parts maintain RoHS3 compliance and MSL rating of 1 (Unlimited). The primary distinction between these parts is the connector feature classification: the 4634-7005 features a closed end design, while the 4634-6000 features a feed-through design. This difference does not affect electrical compatibility or mechanical interchangeability in applications where the connector orientation and cable routing accommodate the feed-through configuration.

Parameter Comparison

Engineering Selection Recommendations

Both the 4634-7005 and 4634-6000 are active production parts with full RoHS3 compliance and identical electrical specifications. Selection between these parts should be based on application requirements regarding connector end configuration. The closed-end design of the 4634-7005 is suitable for applications where cable termination occurs at the connector without pass-through requirements. The feed-through design of the 4634-6000 accommodates applications requiring signal or power distribution through the connector body. Both parts carry equivalent regulatory compliance (RoHS3, ECCN EAR99, HTSUS 8536.69.4051) and identical moisture sensitivity ratings, ensuring interchangeability from a compliance and environmental standpoint.

Frequently Asked Questions (FAQ)

Q: Are the 4634-7005 and 4634-6000 electrically interchangeable?

A: Yes. Both connectors maintain identical electrical specifications including 34-position configuration, 0.100" pitch, gold contact finish at 30.0µin thickness, and support for 26-28 AWG wire gauges. Electrical performance is equivalent.

Q: What is the difference between closed-end and feed-through connector designs?

A: A closed-end connector (4634-7005) terminates the cable at the connector body. A feed-through connector (4634-6000) allows signal or power to pass through the connector body to additional downstream connections. Selection depends on application topology.

Q: Can I use the 4634-6000 as a direct replacement for the 4634-7005 in my design?

A: Mechanical and electrical compatibility is maintained. Verify that your application's physical layout and cable routing accommodate the feed-through connector design before substitution.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the 4634-7005 and 4634-6000 are RoHS3 compliant with identical moisture sensitivity ratings (MSL 1, Unlimited).

Q: What wire gauges are supported by these connectors?

A: Both connectors support 26-28 AWG wire, in either stranded or solid configuration, using IDC termination.

Q: Do these connectors require any special handling or storage conditions?

A: Both parts carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.