3M 4634-6200 Rectangular Connector Plug - Equivalent & Substitute Parts

Part Overview

The 3M 4634-6200 is a 34-position rectangular plug connector designed for IDC (Insulation Displacement Contact) termination with 26-28 AWG wire. This connector features gold-plated contacts, a 0.100" pitch configuration with 2-row layout, and is suitable for free-hanging in-line applications. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, application redesign, or supply chain considerations.

Substiute Parts

4634-6200

3MIn Stock: 11484634-6200 Datasheet

Current PartRFQ

4634-6000

3MIn Stock: 11114634-6000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 4634-6200 is determined by strict equivalence across the following critical parameters:

• Connector Type & Position Count: Must be plug configuration with 34 positions
• Pitch & Row Configuration: 0.100" (2.54mm) pitch with 2-row layout and 0.100" row spacing
• Termination Method: IDC cable termination capability
• Wire Gauge Compatibility: 26-28 AWG support for both stranded and solid wire
• Contact Specifications: Gold plating with 30.0µin (0.76µm) finish thickness
• Mounting & Mechanical: Free-hanging in-line mounting type
• Compliance: ROHS3 compliance and MSL 1 rating

The 3M 4634-6000 qualifies as a direct substitute based on identical electrical and mechanical parameters across all critical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the 4634-6200 and 4634-6000 maintain Active product status within the 3M 4600 series. Selection between these parts should be based on availability and application requirements. The 4634-6000 differs only in fastening type specification, which does not affect core electrical or mechanical compatibility for IDC termination applications. Both parts carry ROHS3 compliance and MSL 1 rating, ensuring regulatory and environmental suitability for equivalent applications. Inventory levels should be considered as a secondary factor in part selection when both options are functionally interchangeable.

Frequently Asked Questions (FAQ)

Q: Can the 4634-6000 be used as a direct replacement for the 4634-6200?

A: Yes. Both parts share identical electrical and mechanical specifications including 34-position configuration, 0.100" pitch, 2-row layout, IDC termination capability, 26-28 AWG wire gauge support, and gold contact finish. The parts are functionally equivalent for applications requiring these specifications.

Q: What is the significance of the fastening type difference between these parts?

A: The 4634-6200 specifies "Latch Lock/Eject Hooks, Short" fastening, while the 4634-6000 does not specify a fastening type. This difference does not affect the core IDC termination function or electrical performance. Application requirements should determine whether fastening type is a critical selection criterion.

Q: Are both parts suitable for ribbon cable and discrete wire termination?

A: Yes. Both the 4634-6200 and 4634-6000 support IDC termination for discrete or ribbon cable with 26-28 AWG wire in stranded or solid configuration.

Q: Do these connectors require any special handling or storage considerations?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard component storage practices apply.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant. The 4634-6000 additionally carries REACH Unaffected status. Both parts are classified under ECCN EAR99 and HTSUS 8536.69.4051.