3M 4634-6005 Rectangular Connector Plug - Equivalent & Substitute Parts

Part Overview

The 3M 4634-6005 is a 34-position rectangular plug connector with IDC (Insulation Displacement Contact) termination, designed for discrete or ribbon cable applications. This connector features gold-plated male pins rated for 26-28 AWG wire gauges and is configured in a 2-row layout with 0.100" pitch spacing. The part maintains Active product status and is RoHS3 compliant, making it suitable for applications requiring reliable inline connectivity with feed-through capability. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative sourcing options that maintain identical electrical and mechanical specifications.

Substiute Parts

4634-6005

3MIn Stock: 7574634-6005 Datasheet

Current PartRFQ

4634-6000

3MIn Stock: 11114634-6000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 4634-6005 is determined by strict equivalence across the following critical parameters:

• Connector Configuration: 34-position plug with 2-row layout and 0.100" pitch spacing
• Termination Method: IDC cable termination for discrete or ribbon cable
• Electrical Specifications: Male pin contacts with gold plating (30.0µin thickness)
• Wire Compatibility: 26-28 AWG wire gauge acceptance for both stranded and solid conductors
• Mechanical Interface: Free hanging in-line mounting with feed-through capability
• Compliance Standards: RoHS3 compliance and MSL 1 rating

The identified substitute part 3M 4634-6000 maintains complete parameter equivalence across all specified electrical and mechanical characteristics, differing only in inventory availability and base product designation within the 4600 series family.

Parameter Comparison

Engineering Selection Recommendations

Both the 4634-6005 and 4634-6000 maintain Active product status within the 3M 4600 series rectangular connector family. Selection between these parts should be based on availability and lead time requirements, as they are electrically and mechanically equivalent. Both parts satisfy RoHS3 compliance requirements and carry MSL 1 ratings, indicating no moisture sensitivity constraints for storage or handling. The 4634-6000 currently maintains higher inventory levels (1068 units versus 667 units), which may provide supply chain advantages for high-volume applications or extended procurement timelines.

Frequently Asked Questions (FAQ)

Q: Are the 4634-6005 and 4634-6000 fully interchangeable?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters, including connector configuration, contact specifications, wire gauge compatibility, and compliance certifications. They are direct substitutes within the 3M 4600 series.

Q: What determines substitution eligibility for 34-position IDC rectangular connectors?

A: Substitution requires matching specifications across connector type (plug), position count (34), contact type (male pin), pitch (0.100"), row configuration (2 rows at 0.100" spacing), termination method (IDC), wire gauge range (26-28 AWG), contact finish (gold), and compliance status (RoHS3, MSL 1).

Q: Can these connectors accept both stranded and solid wire?

A: Yes. Both the 4634-6005 and 4634-6000 are rated for 26-28 AWG wire in either stranded or solid conductor configuration through their IDC termination design.

Q: What is the significance of the feed-through feature?

A: The feed-through capability allows the connector to maintain signal continuity while accommodating inline cable connections, enabling daisy-chain or multi-point network configurations without requiring separate pass-through components.

Q: Are there any storage or handling requirements for these connectors?

A: Both parts carry MSL 1 ratings, indicating unlimited moisture sensitivity level. No special storage conditions or baking procedures are required prior to assembly or deployment.