3M 4630-6205 Rectangular Connector Plug - Equivalent & Substitute Parts

Part Overview

The 3M 4630-6205 is a 30-position rectangular plug connector with IDC (Insulation Displacement Contact) termination, designed for discrete or ribbon cable applications with wire gauges of 26-28 AWG. This connector features gold-plated contacts, a 0.100" pitch configuration with 2-row layout, and latch lock/eject hook fastening. The part is actively manufactured and ROHS3 compliant, making it suitable for industrial and commercial applications requiring reliable in-line connectivity. Equivalent parts may be required due to inventory constraints, design revisions, or supply chain optimization while maintaining identical electrical and mechanical performance.

Substiute Parts

4630-6205

3MIn Stock: 12454630-6205 Datasheet

Current PartRFQ

4630-6000

3MIn Stock: 11114630-6000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 4630-6205 is determined by strict equivalence across the following critical parameters:

• Connector Configuration: 30-position plug with 2-row layout at 0.100" pitch and row spacing
• Termination Method: IDC cable termination for 26-28 AWG wire (stranded or solid)
• Contact System: Male pin configuration with gold plating
• Mounting: Free hanging in-line installation
• Compliance: ROHS3 compliance and MSL 1 rating

The substitute part 3M 4630-6000 maintains identical electrical and mechanical specifications across all critical parameters. The primary difference is the fastening type designation, where 4630-6205 specifies latch lock/eject hooks (short) while 4630-6000 does not specify a fastening type. Both parts function within the same connector series (4600) and support identical cable configurations.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 4630-6205 and 3M 4630-6000 are active production parts with identical ROHS3 compliance and MSL 1 ratings, qualifying them for equivalent use in applications requiring 30-position IDC rectangular connectors. Selection between these parts should be based on availability and specific fastening requirements. The 4630-6205 explicitly specifies latch lock/eject hook fastening (short type), while the 4630-6000 does not specify a fastening type designation. For applications where fastening mechanism is a critical design parameter, the 4630-6205 is the specified choice. Where fastening type is not a constraint, either part satisfies the electrical and mechanical requirements for 26-28 AWG IDC termination in 2-row, 30-position configurations.

Frequently Asked Questions (FAQ)

Q: Can the 4630-6000 be used as a direct replacement for the 4630-6205?

A: Yes, both parts share identical electrical and mechanical specifications including connector type, position count, pitch, row configuration, contact type, termination method, wire gauge compatibility, and contact finish. The primary documented difference is the fastening type specification. Substitution is valid where fastening mechanism is not a design-critical parameter.

Q: What determines compatibility between these connector plugs?

A: Compatibility is determined by matching the following parameters: 30-position configuration, 0.100" pitch and row spacing, 2-row layout, male pin contact type, IDC termination for 26-28 AWG wire, gold contact finish, and free hanging in-line mounting. Both parts meet all these criteria.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical ROHS3 compliance, MSL 1 rating, EAR99 ECCN classification, and HTSUS code 8536.69.4051. Compliance status is equivalent.

Q: What is the significance of the fastening type difference?

A: The 4630-6205 specifies latch lock/eject hooks (short type) as the fastening mechanism, while the 4630-6000 does not include a fastening type designation in the provided specifications. This difference should be evaluated against application requirements for connector retention and release mechanisms.

Q: Can these connectors accommodate both stranded and solid wire?

A: Yes. Both the 4630-6205 and 4630-6000 support discrete or ribbon cable with 26-28 AWG wire in either stranded or solid configuration through IDC termination.