3M 4630-6200 Rectangular Connector Plug - Equivalent & Substitute Parts

Part Overview

The 3M 4630-6200 is a 30-position rectangular plug connector designed for IDC (Insulation Displacement Contact) termination with 26-28 AWG wire. This connector features gold-plated contacts, a 0.100" pitch configuration with dual-row layout, and latch lock/eject hook fastening. The part is actively manufactured and widely used in ribbon cable and discrete wire applications requiring reliable in-line connectivity. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative connector options that maintain electrical and mechanical compatibility.

Substiute Parts

4630-6200

3MIn Stock: 8054630-6200 Datasheet

Current PartRFQ

4630-6000

3MIn Stock: 11114630-6000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 4630-6200 is determined by strict alignment of the following critical parameters:

• Connector Type & Position Count: Must be a 30-position plug connector
• Pitch & Row Configuration: 0.100" (2.54mm) pitch with 2-row layout and 0.100" row spacing
• Termination Method: IDC cable termination capability
• Wire Gauge Compatibility: Support for 26-28 AWG wire, stranded or solid
• Contact System: Gold-plated contacts with equivalent finish thickness
• Mounting & Fastening: Free hanging in-line configuration with compatible fastening mechanism
• Compliance: ROHS3 compliance and MSL 1 rating

The 3M 4630-6000 qualifies as a direct substitute based on identical electrical and mechanical specifications across all critical parameters. The primary difference is the fastening type specification, which does not affect functional compatibility in applications where the connector is used in standard IDC ribbon cable or discrete wire assemblies.

Parameter Comparison

Engineering Selection Recommendations

Both the 4630-6200 and 4630-6000 are active products manufactured by 3M and carry ROHS3 compliance certification. Selection between these parts should be based on availability and lead time requirements, as both meet identical electrical and mechanical specifications for 30-position IDC ribbon cable and discrete wire applications. The 4630-6000 currently maintains higher inventory levels (1099 pcs vs. 702 pcs), making it suitable for applications where supply chain flexibility is a consideration. Both parts satisfy MSL 1 (unlimited) moisture sensitivity requirements and are suitable for standard industrial and commercial environments.

Frequently Asked Questions (FAQ)

Q: Can the 4630-6000 be used as a direct replacement for the 4630-6200?

A: Yes. Both connectors share identical electrical and mechanical specifications, including 30-position count, 0.100" pitch, 2-row configuration, IDC termination, 26-28 AWG wire gauge support, and gold contact finish. They are functionally interchangeable in applications requiring these specifications.

Q: What is the significance of the fastening type difference between these parts?

A: The 4630-6200 specifies "Latch Lock/Eject Hooks, Short" while the 4630-6000 does not specify a fastening type. This difference does not affect compatibility in standard IDC ribbon cable assemblies where the connector is used in typical in-line configurations.

Q: Are both parts RoHS compliant?

A: Yes. Both the 4630-6200 and 4630-6000 are ROHS3 compliant and carry MSL 1 (unlimited) moisture sensitivity ratings, meeting current environmental and reliability standards.

Q: What wire types are compatible with these connectors?

A: Both connectors support 26-28 AWG wire in stranded or solid configuration, suitable for discrete wire termination or ribbon cable assembly using IDC termination methods.

Q: Are there any packaging or inventory considerations when selecting between these parts?

A: Both parts are supplied in bulk packaging. The 4630-6000 currently has higher inventory availability (1099 pcs) compared to the 4630-6200 (702 pcs), which may influence selection based on project timeline and quantity requirements.