3M 4626-7200 Equivalent & Substitute Parts

Part Overview

The 3M 4626-7200 is a 26-position rectangular plug connector with IDC (Insulation Displacement Contact) termination, designed for discrete or ribbon cable applications. This connector features gold-plated male pins with 0.100" (2.54mm) pitch in a 2-row configuration and is classified as Active product status. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector series, enabling component interchangeability in applications where the primary part number becomes unavailable or inventory constraints require alternative sourcing.

Key Parameters

Parameter	Value
Manufacturer Part Number	4626-7200
Manufacturer	3M
Category	Rectangular Connectors
Series	4600
Connector Type	Plug
Contact Type	Male Pin
Number of Positions	26
Pitch	0.100" (2.54mm)
Number of Rows	2
Row Spacing	0.100" (2.54mm)
Mounting Type	Free Hanging (In-Line)
Cable Termination	IDC
Wire Gauge	26-28 AWG, Stranded or Solid
Contact Finish	Gold
Contact Finish Thickness	30.0µin (0.76µm)
Color	Gray
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 4626-7200 is determined by strict equivalence across the following critical parameters:

Connector Type & Contact Configuration: Plug connector with male pin contacts
Electrical Interface: 26-position IDC termination for 26-28 AWG wire
Mechanical Dimensions: 0.100" (2.54mm) pitch, 2-row configuration with 0.100" row spacing
Mounting & Termination: Free hanging in-line mounting with IDC cable termination
Material & Finish: Gold contact finish at 30.0µin thickness, gray housing
Compliance: ROHS3 compliant, MSL 1 rating

The 3M 4626-6000 qualifies as a substitute part because it maintains all critical electrical and mechanical parameters. The primary distinction is the fastening type specification: the 4626-7200 includes latch lock/eject hooks (short), while the 4626-6000 does not specify fastening type. Both parts share identical connector positioning, contact configuration, wire gauge compatibility, and gold plating specifications.

Parameter Comparison

Parameter	4626-7200 (Main Part)	4626-6000 (Substitute)
Manufacturer Part Number	4626-7200	4626-6000
Manufacturer	3M	3M
Series	4600	4600
Connector Type	Plug	Plug
Contact Type	Male Pin	Male Pin
Number of Positions	26	26
Pitch	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	2	2
Row Spacing	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)
Cable Termination	IDC	IDC
Wire Gauge	26-28 AWG, Stranded or Solid	26-28 AWG, Stranded or Solid
Contact Finish	Gold	Gold
Contact Finish Thickness	30.0µin (0.76µm)	30.0µin (0.76µm)
Color	Gray	Gray
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active

Engineering Selection Recommendations

Both the 3M 4626-7200 and 4626-6000 maintain Active product status and full ROHS3 compliance. Selection between these parts is based on application-specific requirements regarding fastening mechanisms. The 4626-7200 incorporates latch lock/eject hooks (short), providing mechanical retention features for applications requiring secure connector engagement. The 4626-6000 does not specify fastening type, making it suitable for applications where mechanical locking is not a design requirement. Both parts carry MSL 1 rating, indicating unlimited moisture sensitivity protection and suitability for standard storage and handling conditions. Current inventory levels support both options: 4626-7200 (785 pcs) and 4626-6000 (1166 pcs).

Frequently Asked Questions (FAQ)

Q: Can the 4626-6000 directly replace the 4626-7200 in existing designs?

A: The 4626-6000 maintains electrical and mechanical compatibility with the 4626-7200 across all critical parameters: 26-position IDC termination, 0.100" pitch, 2-row configuration, gold contact finish, and 26-28 AWG wire gauge support. The primary design consideration is the fastening mechanism. If your application requires latch lock/eject hooks for connector retention, the 4626-7200 is the specified part. If mechanical locking is not required, the 4626-6000 is functionally equivalent.

Q: Are there packaging differences between these parts?

A: The 4626-7200 is specified with standard packaging, while the 4626-6000 is supplied in bulk packaging. Both parts are identical in electrical and mechanical specifications. Packaging selection depends on procurement volume and inventory management requirements.

Q: Do both parts support the same wire gauge and termination method?

A: Yes. Both the 4626-7200 and 4626-6000 support 26-28 AWG wire in stranded or solid configuration with IDC termination. Contact finish specifications are identical: gold plating at 30.0µin thickness.

Q: What is the significance of the MSL 1 rating for both parts?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited moisture sensitivity protection. Both parts do not require special moisture control during storage, handling, or assembly, making them suitable for standard manufacturing environments.

Q: Are both parts ROHS3 compliant?

A: Yes. Both the 4626-7200 and 4626-6000 are ROHS3 compliant, meeting environmental and regulatory requirements for restricted substance use.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message