Switchcraft 46204LE Equivalent & Substitute Parts

Part Overview

The Switchcraft 46204LE is a slide switch with DPST (Double Pole Single Throw) configuration rated for 3A AC at 125V. This component features panel mount installation with solder lug termination and non-shorting contact timing. The 46204LE is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations where this switch type is required.

Substiute Parts

46204LE

Switchcraft Inc.In Stock: 106046204LE Datasheet

Current PartRFQ

V80114SS05Q

C&KIn Stock: 1223V80114SS05Q Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 46204LE requires matching the following critical parameters:

• Circuit configuration: DPST topology for dual-pole switching capability
• Mounting interface: Panel mount form factor for mechanical compatibility
• Voltage rating: Minimum 125V AC to maintain electrical safety margins
• Current capacity: Minimum 3A AC rating to support the intended load
• Contact timing: Non-shorting operation to prevent transient switching artifacts
• Termination compatibility: Connection method suitable for the application circuit

The C&K V80114SS05Q meets these substitution criteria with equivalent DPST configuration, panel mount design, and superior current and voltage ratings. However, termination style differs, requiring circuit board modification or adapter implementation.

Parameter Comparison

Engineering Selection Recommendations

The C&K V80114SS05Q serves as a functional substitute for the obsolete Switchcraft 46204LE in applications requiring DPST panel mount switching at 125V AC. The substitute part provides superior current ratings (10A AC versus 3A AC) and extended operating temperature range (-30°C to 85°C versus -20°C to 70°C).

For DC applications exceeding 30V, the V80114SS05Q voltage rating becomes a limiting factor. In such cases, alternative DPST switches with higher DC voltage ratings must be evaluated.

The termination style difference (Quick Connect versus Solder Lug) requires circuit board redesign or connector adaptation. This modification must be validated against mechanical and electrical constraints of the target application.

The V80114SS05Q achieves RoHS3 compliance, addressing regulatory requirements that the original 46204LE does not satisfy. This compliance status is relevant for applications subject to environmental and hazardous substance restrictions.

Frequently Asked Questions (FAQ)

Q: Can the V80114SS05Q directly replace the 46204LE without circuit modification?

A: Direct mechanical substitution is possible due to identical panel mount form factors. However, termination style differs (Quick Connect versus Solder Lug), requiring either circuit board modification to accommodate the 0.110" quick connect terminals or implementation of an adapter interface.

Q: What is the primary limitation of the V80114SS05Q as a substitute?

A: The DC voltage rating of 30V is lower than the 46204LE specification of 125V DC. Applications requiring 125V DC operation must use alternative components with matching DC voltage ratings.

Q: Does the V80114SS05Q meet modern regulatory requirements?

A: Yes. The V80114SS05Q is RoHS3 compliant and actively manufactured, addressing current environmental and hazardous substance regulations. The obsolete 46204LE does not meet these compliance standards.

Q: Are there performance differences in switching characteristics?

A: The V80114SS05Q provides superior current capacity (10A AC and 4A DC) compared to the 46204LE (3A AC and 500mA DC). Both maintain DPST configuration and On-Off function. Contact timing specification is not provided for the V80114SS05Q.

Q: What inventory considerations apply to this substitution?

A: The 46204LE is obsolete with limited remaining stock (1037 pcs). The V80114SS05Q is actively manufactured with current inventory availability (1120 pcs), ensuring long-term supply chain continuity.