461-480 LED Standoff Mounting Pad

Part Overview

The 461-480 is a T1/T1 3/4 LED standoff mounting pad manufactured by Bivar Inc. This natural nylon component provides mechanical support and positioning for LED assemblies. The part maintains active product status with 1026 units in current stock. Substitute parts are identified to address inventory availability, component lifecycle management, or application-specific dimensional requirements.

Substiute Parts

461-480

Bivar Inc.In Stock: 1123461-480 Datasheet

Current PartRFQ

461-500

Bivar Inc.In Stock: 1220461-500 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The identified substitute, 461-500, belongs to the same product family (Bivar Inc. Series 461) and shares identical specifications except for the standoff length dimension. Both parts are natural nylon LED standoff mounting pads designed for T1 and T1 3/4 LED packages. Substitution is determined by the following parameters:

• LED Package Type: Both parts support T1 and T1 3/4 LEDs (identical)
• Material Composition: Both utilize natural nylon (identical)
• Color: Both are natural color (identical)
• Compliance Standards: Both are ROHS3 compliant (identical)
• Moisture Sensitivity: Both classified as MSL 1 (Unlimited) (identical)
• Standoff Length: 461-480 measures 0.480" (12.19 mm); 461-500 measures 0.500" (12.70 mm) (variable)

The length differential of 0.020" (0.51 mm) is the sole mechanical parameter distinguishing these parts.

Parameter Comparison

Engineering Selection Recommendations

Both 461-480 and 461-500 maintain active product status with current inventory availability. Both components satisfy ROHS3 compliance requirements and carry identical moisture sensitivity classifications. Selection between these parts depends exclusively on the required standoff length for the specific mechanical design. The 0.020" length differential must be evaluated against the LED positioning requirements of the target assembly. Both parts are suitable for component selection when length specifications are met.

Frequently Asked Questions (FAQ)

Q: Can 461-500 directly replace 461-480 in my assembly? A: Substitution is viable only if the assembly tolerates the additional 0.020" (0.51 mm) standoff height. Review the printed circuit board layout and LED package clearance requirements to confirm compatibility.

Q: Are both parts equally compliant with regulatory requirements? A: Yes. Both 461-480 and 461-500 are ROHS3 compliant and classified as MSL 1 (Unlimited), meeting identical environmental and regulatory standards.

Q: What happens if the standoff length requirement is critical to my design? A: Each part number provides a specific length. No adjustment or modification is possible. Use 461-480 for 0.480" height or 461-500 for 0.500" height according to your mechanical specification.

Q: Are there inventory or lead time considerations between these parts? A: Current inventory shows 1026 units for 461-480 and 1170 units for 461-500. Availability may change; verify with supplier for procurement timeline requirements.

Q: Does the packaging differ between these parts? A: No. Both parts are supplied in bag packaging with identical handling and storage requirements.