3M 4614-7000 Rectangular Connector Plug - Equivalent & Substitute Parts

Part Overview

The 3M 4614-7000 is a 14-position rectangular plug connector with IDC (Insulation Displacement Contact) termination, designed for discrete or ribbon cable applications with wire gauges of 26-28 AWG. This connector features gold-plated contacts and is housed in a gray plastic body with a closed-end design. The part is Active in product status and widely used in applications requiring reliable in-line connectivity with standard 0.100" (2.54mm) pitch spacing.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector family, allowing for alternative sourcing while preserving functional compatibility in the target application.

Substiute Parts

4614-7000

3MIn Stock: 8834614-7000 Datasheet

Current PartRFQ

4614-6000

3MIn Stock: 202914614-6000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The 3M 4614-7000 has one identified substitute part: 4614-6000. Substitution eligibility is determined by the following critical parameters that must remain constant:

• Connector type (Plug)
• Number of positions (14)
• Pitch spacing (0.100" / 2.54mm)
• Row configuration (2 rows at 0.100" spacing)
• Cable termination method (IDC)
• Wire gauge compatibility (26-28 AWG)
• Contact finish and thickness (Gold, 30.0µin)
• Compliance certifications (ROHS3, MSL 1)

The substitute part 4614-6000 maintains all critical electrical and mechanical parameters. The primary difference is packaging format (Bulk vs. Tray) and connector feature variation (Closed End vs. Feed Through), which do not affect functional compatibility in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

Both the 4614-7000 and 4614-6000 are Active products from 3M's 4600 series rectangular connector family and maintain full compliance with ROHS3 regulations. Selection between these parts should be based on:

Packaging Requirements: The 4614-7000 is supplied in Bulk packaging, while the 4614-6000 is supplied in Tray packaging. Choose based on assembly line handling and inventory management requirements.

Connector Feature Consideration: The 4614-7000 features a Closed End design, while the 4614-6000 features a Feed Through design. Both designs accommodate the same IDC termination method and wire gauge specifications. The feature difference does not impact electrical performance or mechanical fit in standard applications.

Inventory Availability: The 4614-6000 maintains significantly higher stock levels (20,200 pcs) compared to the 4614-7000 (846 pcs), making it the preferred choice for high-volume production or when lead time is a critical factor.

Both parts share identical electrical specifications, compliance certifications, and mechanical compatibility with mating connectors in the 4600 series.

Frequently Asked Questions (FAQ)

Q: Can the 4614-6000 be used as a direct replacement for the 4614-7000?

A: Yes. Both parts maintain identical connector type, position count, pitch spacing, row configuration, IDC termination method, wire gauge compatibility, and contact specifications. The difference in packaging format (Bulk vs. Tray) and connector feature (Closed End vs. Feed Through) does not affect functional compatibility.

Q: What is the difference between Closed End and Feed Through connector features?

A: Closed End connectors (4614-7000) have a sealed design at one end, while Feed Through connectors (4614-6000) allow passage through the connector body. Both accommodate IDC termination and maintain the same electrical and mechanical interface specifications.

Q: Are both parts RoHS compliant?

A: Yes. Both the 4614-7000 and 4614-6000 are ROHS3 Compliant and carry MSL Rating 1 (Unlimited moisture sensitivity level).

Q: Does packaging format affect connector performance?

A: No. Bulk and Tray packaging formats are supply and handling options only. They do not affect the electrical performance, mechanical fit, or reliability of the connector itself.

Q: What wire gauges are compatible with these connectors?

A: Both connectors support 26-28 AWG wire, in either stranded or solid configuration, using IDC termination.

Q: Are these connectors suitable for ribbon cable applications?

A: Yes. Both the 4614-7000 and 4614-6000 support discrete or ribbon cable termination via IDC contacts.