Equivalent & Substitute Parts for 4610X-AP2-103LF

Part Overview

The Bourns 4610X-AP2-103LF is an isolated 5-resistor network array with 10k ohm resistance values, rated at 300mW per element, and housed in a 10-SIP through-hole package. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package form factor and functional circuit topology.

Substiute Parts

4610X-AP2-103LF

Bourns Inc.In Stock: 8294610X-AP2-103LF Datasheet

Current PartRFQ

4310R-102-103LF

Bourns Inc.In Stock: 24944310R-102-103LF Datasheet

SimilarRFQ

CSC10A0310K0GEK

Vishay DaleIn Stock: 2390CSC10A0310K0GEK Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4610X-AP2-103LF is determined by strict equivalence across the following parameters:

• Resistance value: 10k ohm
• Tolerance: ±2%
• Number of resistor elements: 5
• Circuit topology: Isolated configuration
• Power rating per element: 300mW
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 125°C
• Package form factor: 10-SIP
• Mounting technology: Through Hole
• Pin count: 10

All identified substitute parts maintain these core electrical and mechanical specifications. Variations in packaging format (Tube vs. Bulk), resistor-ratio-drift specifications, and REACH compliance status do not affect functional interchangeability in applications where the main part is specified.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain full electrical and mechanical compatibility with the 4610X-AP2-103LF. Selection between alternatives is based on the following factors:

The 4310R-102-103LF (Bourns 4300R series) is supplied in Tube packaging and carries REACH Affected status, whereas the main part is REACH Unaffected. The 4310R exhibits a resistor-ratio-drift specification of 50ppm/°C compared to the main part's unspecified drift parameter.

The CSC10A0310K0GEK (Vishay Dale CSC series) is supplied in Bulk packaging with MSL rating of 1 (Unlimited) and REACH Unaffected status. This part specifies resistor-ratio-drift as ±50ppm/°C.

All three parts are Active status products with ROHS3 compliance and identical core electrical specifications. Packaging format and inventory availability should guide selection based on procurement requirements and supply chain constraints.

Frequently Asked Questions (FAQ)

Q: Can the 4310R-102-103LF be used as a direct replacement for the 4610X-AP2-103LF?

A: Yes. Both parts share identical electrical specifications (10k ohm, ±2% tolerance, 300mW per element, ±100ppm/°C temperature coefficient, -55°C to 125°C operating range) and the same 10-SIP through-hole package form factor. The difference in packaging format (Tube vs. Tape & Box) does not affect functional interchangeability.

Q: What is the difference between the Bourns and Vishay Dale options?

A: The primary differences are manufacturer identity and packaging format. The Vishay Dale CSC10A0310K0GEK is supplied in Bulk packaging with unlimited moisture sensitivity level, while the Bourns parts use Tape & Box or Tube formats. All three maintain identical electrical performance and 10-SIP package compatibility.

Q: Are there any compliance or regulatory differences between these parts?

A: The 4310R-102-103LF carries REACH Affected status, while both the 4610X-AP2-103LF and CSC10A0310K0GEK are REACH Unaffected. All three parts are ROHS3 compliant and carry EAR99 ECCN classification.

Q: Does the resistor-ratio-drift specification affect substitution eligibility?

A: The 4610X-AP2-103LF does not specify resistor-ratio-drift. The substitute parts (4310R-102-103LF and CSC10A0310K0GEK) specify this parameter at 50ppm/°C and ±50ppm/°C respectively. This specification does not prevent substitution; it represents additional performance data provided by the substitute manufacturers.

Q: What packaging considerations should guide part selection?

A: The 4610X-AP2-103LF is supplied in Tape & Box format (813 pcs in stock), the 4310R-102-103LF in Tube format (2459 pcs in stock), and the CSC10A0310K0GEK in Bulk format (2359 pcs in stock). Packaging selection depends on procurement volume requirements, storage conditions, and supply chain logistics.