Equivalent & Substitute Parts for 4610X-AP1-223LF

Part Overview

The 4610X-AP1-223LF is a 9-resistor network array manufactured by Bourns Inc., featuring 22kΩ resistors with ±2% tolerance in a 10-SIP through-hole package. This bussed resistor array is designed for applications requiring multiple matched resistive elements in a compact form factor. The part is currently active in production with 1038 units available in stock. Substitute parts may be required due to packaging preferences, inventory availability, or specific application constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

4610X-AP1-223LF

Bourns Inc.In Stock: 11134610X-AP1-223LF Datasheet

Current PartRFQ

4310R-101-223LF

Bourns Inc.In Stock: 26024310R-101-223LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 4310R-101-223LF qualifies as a direct electrical substitute for the 4610X-AP1-223LF based on the following critical parameters:

• Identical resistance value: 22kΩ
• Identical tolerance: ±2%
• Identical number of resistors: 9
• Identical circuit topology: Bussed configuration
• Identical power rating per element: 200mW
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -55°C to 125°C
• Identical pin count and package class: 10-SIP through-hole

The primary differences between these parts are packaging format (Tape & Box versus Tube) and minor dimensional variations within the 10-SIP envelope. These differences do not affect electrical performance or PCB-level compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 4610X-AP1-223LF and 4310R-101-223LF are active production parts from Bourns Inc. with ROHS3 compliance. Selection between these parts should be based on:

• Packaging requirements: The 4610X-AP1-223LF is supplied in Tape & Box format, while the 4310R-101-223LF is supplied in Tube format. Choose based on your assembly process and inventory management needs.
• Inventory availability: The 4310R-101-223LF has higher stock availability (2552 units) compared to the 4610X-AP1-223LF (1038 units).
• Dimensional constraints: Both parts fit within standard 10-SIP through-hole footprints. Minor dimensional differences are within typical PCB design tolerances.
• Regulatory compliance: Both parts meet ROHS3 requirements. The 4310R-101-223LF is REACH Affected, while the 4610X-AP1-223LF is REACH Unaffected.

Frequently Asked Questions (FAQ)

Q: Can the 4310R-101-223LF be used as a direct replacement for the 4610X-AP1-223LF on the same PCB?

A: Yes. Both parts share identical electrical specifications, pin configuration, and 10-SIP package class. The minor dimensional variations fall within standard through-hole PCB design tolerances and do not affect board-level compatibility.

Q: What is the difference between Tape & Box and Tube packaging?

A: Tape & Box packaging supplies components on carrier tape within a box, typically used for automated assembly lines. Tube packaging supplies components in a plastic tube, often preferred for manual assembly or smaller production runs. The electrical and mechanical properties of the components are identical.

Q: Are there any temperature or performance differences between these parts?

A: No. Both parts operate across the identical temperature range (-55°C to 125°C) with the same temperature coefficient (±100ppm/°C) and power rating (200mW per element).

Q: What does "Bussed" circuit type mean?

A: A bussed resistor network has one common connection point (bus) shared among all resistor elements, reducing pin count and simplifying circuit design compared to isolated resistor arrays.

Q: Does the REACH status difference affect part selection?

A: REACH Affected status indicates the part is subject to REACH chemical regulations. If your application or region requires REACH Unaffected components, the 4610X-AP1-223LF is the appropriate choice. Otherwise, both parts are compliant with applicable regulations.