3M 4610-7355 Rectangular Connector Plug - Equivalent & Substitute Parts

Part Overview

The 3M 4610-7355 is a 10-position rectangular plug connector with IDC (Insulation Displacement Contact) termination, designed for 26-28 AWG wire gauges in both stranded and solid configurations. This connector features gold-plated contacts, a 0.100" pitch in a 2-row configuration, and employs latch lock/eject hook fastening with a closed-end design.

The 4610-7355 is classified as obsolete. Equivalent substitute parts in the active product status are available within the same 3M 4600 series, offering functional compatibility while providing access to current inventory and ongoing manufacturer support.

Substiute Parts

4610-7355

3MIn Stock: 11634610-7355 Datasheet

Current PartRFQ

4610-6050

3MIn Stock: 7564610-6050 Datasheet

MFR RecommendedRFQ

4610-6350

3MIn Stock: 10964610-6350 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4610-7355 is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Plug with male pin contacts
• Position Count & Pitch: 10 positions at 0.100" (2.54mm) pitch in 2-row arrangement
• Cable Termination Method: IDC technology for 26-28 AWG wire
• Contact Material & Finish: Gold plating at 30.0µin thickness
• Electrical & Environmental Compliance: ROHS3 compliance and MSL 1 rating

The substitute parts 4610-6050 and 4610-6350 maintain full equivalence across all critical electrical and mechanical parameters. Both are active products within the 3M 4600 series, ensuring continued availability and manufacturer support. The primary differences between substitutes relate to fastening type and connector end design (feed-through vs. closed-end), which do not affect core electrical compatibility when the application requirements align.

Parameter Comparison

Engineering Selection Recommendations

Both 4610-6050 and 4610-6350 are qualified substitutes for the obsolete 4610-7355 based on complete electrical and mechanical parameter equivalence. Selection between the two active alternatives depends on application-specific requirements:

4610-6050: Recommended for applications where fastening type is not a constraint. This part features feed-through design without specified latch lock fastening, providing a simplified connector configuration. Current inventory: 677 units.

4610-6350: Recommended for applications requiring latch lock/eject hook fastening identical to the original 4610-7355 specification. This part maintains the closed-end fastening mechanism while offering feed-through connector design. Current inventory: 1009 units.

Both parts carry ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current manufacturing environments. The selection between these substitutes should be based solely on mechanical fastening requirements and connector end design compatibility with the target application.

Frequently Asked Questions (FAQ)

Q: Can 4610-6050 and 4610-6350 be used interchangeably with 4610-7355?

A: Both parts are electrically and mechanically equivalent to 4610-7355 across all critical parameters: 10-position configuration, 0.100" pitch, 2-row layout, IDC termination for 26-28 AWG wire, and gold contact finish. Interchangeability depends on whether the application requires the specific fastening type (latch lock/eject hooks) present in 4610-7355 and 4610-6350, or if the simplified fastening of 4610-6050 is acceptable.

Q: What is the difference between the two substitute parts?

A: The primary difference is fastening type. The 4610-6350 includes latch lock/eject hook fastening matching the original 4610-7355, while 4610-6050 does not specify this fastening mechanism. Both employ feed-through connector design and are otherwise electrically identical.

Q: Are there any compliance or regulatory differences between these parts?

A: No. All three parts (4610-7355, 4610-6050, and 4610-6350) are ROHS3 compliant with MSL 1 rating. The 4610-6050 and 4610-6350 additionally carry REACH unaffected status. All share identical ECCN (EAR99) and HTSUS (8536.69.4051) classifications.

Q: Why is 4610-7355 obsolete while the substitutes are active?

A: The 4610-7355 has been discontinued by 3M, but the 4610-6050 and 4610-6350 remain in active production within the 4600 series. These active alternatives provide equivalent functionality with current manufacturer support and ongoing inventory availability.

Q: Can I use these connectors with different wire gauges?

A: No. All three parts are specified for 26-28 AWG wire only, in both stranded and solid configurations. Wire gauge compatibility is a critical parameter for IDC termination and cannot be altered.

Q: What packaging options are available?

A: The 4610-7355 is available in unspecified packaging. The 4610-6050 and 4610-6350 are supplied in bulk packaging. Packaging format should be confirmed with the supplier based on procurement requirements.