3M 4610-6700 Equivalent & Substitute Parts

Part Overview

The 3M 4610-6700 is a 10-position rectangular plug connector from the 4600 series, designed for IDC (Insulation Displacement Connector) termination with 26-28 AWG wire. This connector features gold-plated male pins, free-hanging in-line mounting, and feed-through capability for discrete or ribbon cable applications.

The 4610-6700 is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this connector type.

Substiute Parts

4610-6700

3MIn Stock: 11584610-6700 Datasheet

Current PartRFQ

4610-6000

3MIn Stock: 14614610-6000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4610-6700 is determined by strict equivalence across the following critical parameters:

• Connector Type & Position Count: Must be a 10-position plug connector
• Pitch & Row Configuration: 0.100" (2.54mm) pitch with 2-row layout and 0.100" row spacing
• Contact System: Male pin contacts with gold plating (30.0µin minimum)
• Termination Method: IDC cable termination for 26-28 AWG wire (stranded or solid)
• Mounting Configuration: Free-hanging in-line mounting with feed-through capability
• Compliance: ROHS3 compliant

The substitute part 4610-6000 meets all these criteria and is sourced from the same manufacturer (3M) within the same 4600 series. The primary distinction is product status: 4610-6000 is active production, whereas 4610-6700 is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The 3M 4610-6000 is the direct substitute for the obsolete 4610-6700. Both parts are ROHS3 compliant and maintain identical electrical and mechanical specifications across all critical parameters. The 4610-6000 is currently in active production status with confirmed inventory availability, making it the appropriate selection for new designs, production continuity, and component replacement.

No additional compliance or certification gaps exist between the main part and its substitute. The transition from 4610-6700 to 4610-6000 presents no technical or regulatory barriers.

Frequently Asked Questions (FAQ)

Q: Can the 4610-6000 be used as a direct replacement for the 4610-6700?

A: Yes. Both connectors are electrically and mechanically equivalent across all specified parameters, including position count, pitch, contact type, termination method, and wire gauge compatibility. The 4610-6000 is the active production equivalent.

Q: What is the primary difference between these two part numbers?

A: The 4610-6700 is obsolete, while the 4610-6000 is in active production. All functional and physical specifications are identical.

Q: Are there any compatibility concerns with existing cable assemblies?

A: No. The identical pitch (0.100"), row spacing (0.100"), position count (10), and IDC termination method ensure full mechanical and electrical compatibility with existing 4610-6700 cable assemblies.

Q: Does the 4610-6000 support the same wire gauge range?

A: Yes. Both parts support 26-28 AWG wire in stranded or solid configuration with IDC termination.

Q: Are both parts RoHS compliant?

A: Yes. Both the 4610-6700 and 4610-6000 are ROHS3 compliant.

Q: What is the packaging difference between these parts?

A: The 4610-6700 packaging specification is not provided. The 4610-6000 is supplied in bulk packaging.