Equivalent & Substitute Parts for 4608X-AP2-153LF

Part Overview

The 4608X-AP2-153LF is a 4-resistor isolated network array manufactured by Bourns Inc., featuring 15kΩ resistors with ±2% tolerance and 300mW power per element. This through-hole component is designed for applications requiring matched resistor networks in a compact 8-SIP package. The part maintains Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set.

Substiute Parts

4608X-AP2-153LF

Bourns Inc.In Stock: 9454608X-AP2-153LF Datasheet

Current PartRFQ

4308R-102-153LF

Bourns Inc.In Stock: 43214308R-102-153LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4608X-AP2-153LF is determined by matching the following critical parameters:

• Resistance value: 15kΩ
• Tolerance: ±2%
• Number of resistors: 4
• Power per element: 300mW
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 125°C
• Circuit type: Isolated
• Package: 8-SIP through-hole configuration
• Pin count: 8

The 4308R-102-153LF meets all electrical specifications and maintains mechanical compatibility through the 8-SIP package standard. Physical dimensions vary within acceptable tolerances for through-hole mounting applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 4608X-AP2-153LF and 4308R-102-153LF are Active products with RoHS3 compliance, suitable for applications requiring regulatory adherence. The 4608X-AP2-153LF is available in Tape & Box packaging with 858 units in stock. The 4308R-102-153LF is supplied in Tube packaging with 4250 units in stock. Selection between these parts should be based on packaging requirements, inventory availability, and supply chain considerations. Both parts satisfy identical electrical and mechanical specifications for 15kΩ isolated 4-resistor networks in 8-SIP configuration.

Frequently Asked Questions (FAQ)

Q: Can the 4308R-102-153LF directly replace the 4608X-AP2-153LF in existing designs?

A: Yes. Both parts share identical electrical specifications (15kΩ, ±2% tolerance, 300mW per element, ±100ppm/°C temperature coefficient) and mechanical compatibility through the 8-SIP through-hole package standard with 8 pins.

Q: What are the physical dimension differences between these parts?

A: The 4608X-AP2-153LF measures 0.798" L × 0.098" W × 0.200" H (20.27mm × 2.49mm × 5.08mm). The 4308R-102-153LF measures 0.784" L × 0.085" W × 0.195" H (19.91mm × 2.16mm × 4.95mm). Both fit standard 8-SIP through-hole footprints.

Q: Are there differences in packaging that affect procurement?

A: The 4608X-AP2-153LF is supplied in Tape & Box packaging, while the 4308R-102-153LF is supplied in Tube packaging. Packaging selection depends on assembly process requirements and inventory management practices.

Q: Do these parts have different compliance certifications?

A: Both parts are RoHS3 compliant and EAR99 classified. The 4308R-102-153LF is REACH Affected, while the 4608X-AP2-153LF is REACH Unaffected. Regulatory requirements for your application should guide selection.

Q: What is the resistor-ratio-drift specification for these parts?

A: The 4608X-AP2-153LF does not specify resistor-ratio-drift. The 4308R-102-153LF specifies 50ppm/°C resistor-ratio-drift, indicating tighter matching stability over temperature.