Equivalent & Substitute Parts for 4606X-AP2-102LF

Part Overview

The 4606X-AP2-102LF is a 3-resistor network array manufactured by Bourns Inc., featuring 1kΩ isolated resistors rated at 300mW per element. This through-hole component is designed for applications requiring multiple matched resistor elements in a compact 6-SIP package. The part maintains Active product status with full RoHS3 compliance and is currently in stock with 756 units available.

Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package type and functional requirements.

Substiute Parts

4606X-AP2-102LF

Bourns Inc.In Stock: 7704606X-AP2-102LF Datasheet

Current PartRFQ

4306R-102-102LF

Bourns Inc.In Stock: 27874306R-102-102LF Datasheet

SimilarRFQ

CSC06A031K00GEK

Vishay DaleIn Stock: 3392CSC06A031K00GEK Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4606X-AP2-102LF is determined by strict equivalence across the following critical parameters:

• Resistance value: 1kΩ
• Tolerance: ±2%
• Number of resistor elements: 3
• Circuit configuration: Isolated
• Power rating per element: 300mW
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 125°C
• Package: 6-SIP through-hole
• Pin count: 6

Two substitute parts meet these criteria: the 4306R-102-102LF (Bourns Inc., 4300R series) and the CSC06A031K00GEK (Vishay Dale, CSC series). Both maintain identical electrical specifications and package compatibility with the main part.

Parameter Comparison

Engineering Selection Recommendations

All three parts—4606X-AP2-102LF, 4306R-102-102LF, and CSC06A031K00GEK—are functionally equivalent for applications requiring isolated 1kΩ 3-resistor networks in 6-SIP packages. Selection between these parts may be based on:

• Packaging format: The 4606X-AP2-102LF is supplied in Cut Tape; the 4306R-102-102LF in Tube; the CSC06A031K00GEK in Bulk
• Inventory availability: CSC06A031K00GEK has the highest stock level at 3,339 units
• Regulatory status: All parts maintain ROHS3 compliance; the 4306R-102-102LF is REACH Affected, while the 4606X-AP2-102LF and CSC06A031K00GEK are REACH Unaffected
• Moisture sensitivity: The CSC06A031K00GEK carries MSL 1 (Unlimited); the other parts are Not Applicable

Frequently Asked Questions (FAQ)

Q: Can the 4306R-102-102LF replace the 4606X-AP2-102LF in existing designs?

A: Yes. Both parts share identical electrical specifications (1kΩ, ±2%, 300mW, ±100ppm/°C) and 6-SIP through-hole package geometry. The primary difference is packaging format (Tube vs. Cut Tape) and REACH compliance status.

Q: What are the dimensional differences between substitute parts?

A: The 4606X-AP2-102LF measures 0.598" L × 0.098" W with 0.200" seated height. The 4306R-102-102LF measures 0.584" L × 0.085" W with 0.195" seated height. The CSC06A031K00GEK measures 0.590" L × 0.098" W with 0.195" seated height. These minor variations remain within 6-SIP package tolerances and do not affect PCB footprint compatibility.

Q: Are there electrical performance differences between the substitute parts?

A: All three parts maintain the same resistance value, tolerance, power rating, and temperature coefficient. The 4306R-102-102LF specifies a resistor-ratio-drift of 50ppm/°C, while the CSC06A031K00GEK specifies ±50ppm/°C. These specifications do not affect functional equivalence for standard applications.

Q: Which substitute part should be selected for high-volume production?

A: Selection depends on supply chain requirements. The CSC06A031K00GEK offers the highest inventory (3,339 units) in Bulk packaging. The 4306R-102-102LF provides Bourns continuity with Tube packaging. The 4606X-AP2-102LF maintains the original specification in Cut Tape format.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All three parts—4606X-AP2-102LF, 4306R-102-102LF, and CSC06A031K00GEK—are ROHS3 Compliant.