Equivalent & Substitute Parts for 4606X-AP1-562LF

Part Overview

The 4606X-AP1-562LF is a 5-resistor network array manufactured by Bourns Inc., featuring 5.6k Ohm resistors with ±2% tolerance in a 6-SIP through-hole package. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set for resistor network arrays.

Substiute Parts

4606X-AP1-562LF

Bourns Inc.In Stock: 8574606X-AP1-562LF Datasheet

Current PartRFQ

4306R-101-562LF

Bourns Inc.In Stock: 32564306R-101-562LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 4306R-101-562LF qualifies as a substitute for the 4606X-AP1-562LF based on the following matching parameters:

• Resistance value: 5.6k Ohm (identical)
• Tolerance: ±2% (identical)
• Number of resistors: 5 (identical)
• Circuit type: Bussed (identical)
• Power per element: 200mW (identical)
• Temperature coefficient: ±100ppm/°C (identical)
• Operating temperature range: -55°C ~ 125°C (identical)
• Package / Case: 6-SIP (identical)
• Mounting type: Through Hole (identical)
• Number of pins: 6 (identical)

Both parts are manufactured by Bourns Inc. and maintain Active product status. Substitution is valid where these core electrical and mechanical parameters are preserved.

Parameter Comparison

Engineering Selection Recommendations

Both the 4606X-AP1-562LF and 4306R-101-562LF maintain Active product status and ROHS3 compliance. The 4306R-101-562LF is suitable as a substitute where the core electrical parameters (resistance, tolerance, power rating, temperature coefficient, and operating range) are the primary selection criteria. Physical dimensions differ slightly between the two parts; the 4306R-101-562LF is marginally smaller in length, width, and height. Packaging format differs (Tape & Box versus Tube), which may affect procurement and handling workflows. REACH compliance status differs; the 4306R-101-562LF is REACH Affected while the 4606X-AP1-562LF is REACH Unaffected. Selection between these parts should account for regulatory requirements specific to the application region and end-use industry.

Frequently Asked Questions (FAQ)

Q: What electrical parameters must match for the 4306R-101-562LF to substitute for the 4606X-AP1-562LF?

A: The resistance value (5.6k Ohm), tolerance (±2%), power per element (200mW), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 125°C), and circuit type (Bussed) must all match. Both parts meet these criteria.

Q: Are there physical differences between these two parts?

A: Yes. The 4306R-101-562LF has slightly smaller dimensions (0.584" L x 0.085" W versus 0.598" L x 0.098" W) and lower maximum seated height (0.195" versus 0.200"). Both use the 6-SIP package and through-hole mounting, so they are mechanically compatible in standard PCB layouts.

Q: Does packaging format affect substitution?

A: The 4606X-AP1-562LF is supplied in Tape & Box format, while the 4306R-101-562LF is supplied in Tube format. This affects procurement, storage, and handling but does not impact electrical or mechanical compatibility on the PCB.

Q: What is the difference in REACH compliance status?

A: The 4606X-AP1-562LF is REACH Unaffected, while the 4306R-101-562LF is REACH Affected. Applications subject to REACH regulations should confirm compliance requirements with the specific end-use region and industry standards before substitution.

Q: Can these parts be used interchangeably in circuit design?

A: Yes, provided that the application does not impose constraints based on physical dimensions, packaging format, or regional regulatory compliance. The electrical specifications are identical.