Equivalent & Substitute Parts for 4606X-AP1-472LF

Part Overview

The Bourns 4606X-AP1-472LF is a 5-resistor network array with 4.7k ohm resistance values, designed for through-hole mounting in 6-SIP package configuration. This active product delivers 200mW power per element with ±2% tolerance and ±100ppm/°C temperature coefficient. The component is widely used in applications requiring integrated resistor networks with bussed circuit topology. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter range.

Substiute Parts

4606X-AP1-472LF

Bourns Inc.In Stock: 10164606X-AP1-472LF Datasheet

Current PartRFQ

4306R-101-472LF

Bourns Inc.In Stock: 23284306R-101-472LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 4306R-101-472LF qualifies as a direct substitute for the 4606X-AP1-472LF based on the following critical parameters:

• Identical resistance value: 4.7k Ohm
• Matching tolerance: ±2%
• Equivalent power rating: 200mW per element
• Same circuit topology: Bussed configuration
• Identical number of resistors: 5
• Matching package type: 6-SIP
• Compatible mounting method: Through Hole
• Overlapping operating temperature range: -55°C ~ 125°C
• Equivalent pin count: 6 pins

Both components are manufactured by Bourns Inc. and maintain active product status. Substitution is valid when the application requirements do not exceed the specified electrical and thermal parameters of either component.

Parameter Comparison

Engineering Selection Recommendations

Both the 4606X-AP1-472LF and 4306R-101-472LF are active products manufactured by Bourns Inc. with ROHS3 compliance. Selection between these components should be based on:

• Packaging requirements: The 4606X-AP1-472LF is supplied in Cut Tape format, while the 4306R-101-472LF is supplied in Tube packaging. Choose based on assembly process compatibility and inventory management needs.
• Regulatory compliance: Both components maintain ROHS3 compliance. The 4306R-101-472LF is REACH Affected, while the 4606X-AP1-472LF is REACH Unaffected. Verify REACH compliance requirements for your application jurisdiction.
• Physical dimensions: Minor dimensional variations exist between the two parts. Verify PCB layout constraints before final selection.

Frequently Asked Questions (FAQ)

Q: Can the 4306R-101-472LF replace the 4606X-AP1-472LF in existing designs?

A: Yes, the 4306R-101-472LF is electrically and functionally equivalent. Both components share identical resistance values, tolerance, power ratings, temperature coefficients, and circuit topology. Verify that your PCB layout accommodates the slight dimensional differences and that packaging format (Tube vs. Cut Tape) aligns with your assembly process.

Q: What are the key differences between these two parts?

A: The primary differences are packaging format and regulatory status. The 4606X-AP1-472LF uses Cut Tape packaging while the 4306R-101-472LF uses Tube packaging. The 4306R-101-472LF is REACH Affected, whereas the 4606X-AP1-472LF is REACH Unaffected. All electrical specifications remain identical.

Q: Are there any temperature or power limitations when substituting?

A: No. Both components operate across the identical temperature range (-55°C ~ 125°C) and deliver equivalent power per element (200mW). Substitution does not introduce thermal or power derating concerns.

Q: Does the 6-SIP package remain the same for both parts?

A: Yes. Both components use the 6-SIP package with identical pin count and through-hole mounting configuration. Physical dimensions show minor variations, so verify PCB footprint compatibility.

Q: What compliance certifications apply to both parts?

A: Both components are ROHS3 compliant. The 4306R-101-472LF carries REACH Affected status, while the 4606X-AP1-472LF is REACH Unaffected. Confirm REACH requirements for your target market before final selection.