Equivalent & Substitute Parts for 4606X-AP1-271LF

Part Overview

The 4606X-AP1-271LF is a 5-resistor network array manufactured by Bourns Inc., featuring 270 Ohm resistors with ±2% tolerance in a 6-SIP through-hole package. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set for resistor network arrays.

Substiute Parts

4606X-AP1-271LF

Bourns Inc.In Stock: 7354606X-AP1-271LF Datasheet

Current PartRFQ

4306R-101-271LF

Bourns Inc.In Stock: 7894306R-101-271LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4606X-AP1-271LF is determined by matching the following critical parameters:

• Resistance value: 270 Ohms
• Tolerance: ±2%
• Number of resistors: 5
• Power per element: 200mW
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 125°C
• Circuit type: Bussed
• Number of pins: 6
• Package type: 6-SIP
• Mounting type: Through Hole

The substitute part 4306R-101-271LF meets all critical electrical parameters. Differences exist in packaging format (Tube vs. Tape & Box), physical dimensions, and resistor-ratio-drift specification, which do not affect functional equivalence in applications requiring these electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the 4606X-AP1-271LF and 4306R-101-271LF are Active status components manufactured by Bourns Inc. with identical electrical specifications. Both are ROHS3 compliant and classified under the same ECCN and HTSUS codes. Selection between these parts is determined by packaging and supply requirements: the 4606X-AP1-271LF is supplied in Tape & Box format, while the 4306R-101-271LF is supplied in Tube format. Physical dimension variations are minor and do not affect PCB layout compatibility for standard through-hole applications. Both parts satisfy equivalent functional requirements in circuits requiring 270 Ohm, 5-resistor bussed networks with the specified electrical characteristics.

Frequently Asked Questions (FAQ)

Q: Can 4306R-101-271LF replace 4606X-AP1-271LF in production?

A: Yes. Both parts share identical electrical specifications: 270 Ohm resistance, ±2% tolerance, 5 resistors, 200mW power per element, ±100ppm/°C temperature coefficient, and 6-SIP through-hole package. Substitution is valid for applications requiring these electrical parameters.

Q: What are the differences between these parts?

A: The primary differences are packaging format (Tape & Box vs. Tube) and minor physical dimensions. The 4606X-AP1-271LF measures 0.598" L x 0.098" W with 0.200" max height, while the 4306R-101-271LF measures 0.584" L x 0.085" W with 0.195" max height. These dimensional variations do not affect through-hole PCB compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both 4606X-AP1-271LF and 4306R-101-271LF are ROHS3 compliant.

Q: What is the operating temperature range for these parts?

A: Both parts operate across -55°C to 125°C with a temperature coefficient of ±100ppm/°C.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Tape & Box or Tube) affects supply chain logistics and handling but does not alter electrical performance or functional characteristics.