4606X-AP1-104LF Equivalent & Substitute Parts

Part Overview

The 4606X-AP1-104LF is a 5-resistor network array manufactured by Bourns Inc., featuring 100k Ohm resistors with ±2% tolerance in a 6-SIP through-hole package. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set for resistor network arrays.

Substiute Parts

4606X-AP1-104LF

Bourns Inc.In Stock: 9424606X-AP1-104LF Datasheet

Current PartRFQ

4306R-101-104LF

Bourns Inc.In Stock: 18714306R-101-104LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 4306R-101-104LF qualifies as a direct substitute for the 4606X-AP1-104LF based on the following critical parameters:

• Identical resistance value: 100k Ohm
• Matching tolerance: ±2%
• Same number of resistors: 5
• Identical circuit type: Bussed
• Equivalent power rating: 200mW per element
• Same temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -55°C ~ 125°C
• Same pin count and package: 6-SIP through-hole
• Both manufactured by Bourns Inc.

Substitution is valid when these core electrical and mechanical parameters remain constant across the component selection.

Parameter Comparison

Engineering Selection Recommendations

Both the 4606X-AP1-104LF and 4306R-101-104LF maintain Active product status and ROHS3 compliance. The primary distinction between these components is packaging format: the 4606X-AP1-104LF is supplied in Tape & Box configuration, while the 4306R-101-104LF is supplied in Tube packaging. Both components satisfy identical electrical and mechanical requirements for 100k Ohm 5-resistor bussed networks in 6-SIP through-hole applications. Selection between these parts depends on procurement and assembly process requirements rather than functional performance.

Frequently Asked Questions (FAQ)

Q: Can the 4306R-101-104LF replace the 4606X-AP1-104LF in existing designs?

A: Yes. Both components share identical electrical specifications (100k Ohm, ±2% tolerance, 200mW per element, ±100ppm/°C temperature coefficient) and mechanical compatibility (6-SIP through-hole package, 6 pins). The components are functionally interchangeable.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging. The 4606X-AP1-104LF uses Tape & Box (TB) packaging, while the 4306R-101-104LF uses Tube packaging. Electrical and mechanical specifications are identical.

Q: Are there dimensional differences between these parts?

A: Minor dimensional variations exist. The 4606X-AP1-104LF measures 0.598" L x 0.098" W (15.19mm x 2.49mm) with 0.200" maximum seated height. The 4306R-101-104LF measures 0.584" L x 0.085" W (14.83mm x 2.16mm) with 0.195" maximum seated height. Both fit the 6-SIP package specification and are compatible with standard through-hole PCB layouts.

Q: Do both parts meet the same compliance standards?

A: Both components are ROHS3 compliant and carry EAR99 ECCN classification. The 4606X-AP1-104LF is REACH Unaffected, while the 4306R-101-104LF is REACH Affected. Verify REACH compliance requirements for your specific application.

Q: Which part should be selected for new designs?

A: Selection is based on procurement and assembly requirements. Both parts are Active status and functionally equivalent. Choose based on available packaging format and supply chain considerations.