Equivalent & Substitute Parts for 4606X-AP1-102LF

Part Overview

The Bourns 4606X-AP1-102LF is a 5-resistor network array with 1kΩ resistance per element, rated at 200mW power dissipation per element, and housed in a 6-SIP through-hole package. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package form factor and functional circuit topology.

Substiute Parts

4606X-AP1-102LF

Bourns Inc.In Stock: 11894606X-AP1-102LF Datasheet

Current PartRFQ

4306R-101-102LF

Bourns Inc.In Stock: 36314306R-101-102LF Datasheet

SimilarRFQ

CSC06A011K00GEK

Vishay DaleIn Stock: 3835CSC06A011K00GEK Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4606X-AP1-102LF is determined by the following critical parameters:

• Resistance value: 1kΩ
• Tolerance: ±2%
• Circuit configuration: Bussed topology with 5 resistor elements
• Power rating: 200mW per element minimum
• Temperature coefficient: ±100ppm/°C
• Package form factor: 6-SIP through-hole
• Operating temperature range: -55°C to 125°C
• Pin count: 6 pins

The identified substitute parts maintain all critical electrical specifications and mechanical compatibility within the 6-SIP package envelope. Variations in packaging format (Cut Tape, Tube, Bulk) and minor dimensional tolerances do not affect functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and ROHS3 compliance, confirming ongoing manufacturer support and regulatory alignment. The 4606X-AP1-102LF and its substitutes are functionally equivalent across all specified electrical and mechanical parameters.

Selection between the main part and substitutes may be based on packaging availability and supply chain considerations. The 4306R-101-102LF is supplied in Tube packaging, while the CSC06A011K00GEK is supplied in Bulk format. The original 4606X-AP1-102LF is supplied in Cut Tape format. All three maintain identical electrical performance and 6-SIP package compatibility for through-hole PCB assembly.

Frequently Asked Questions (FAQ)

Q: Can the 4306R-101-102LF replace the 4606X-AP1-102LF in existing designs?

A: Yes. Both parts share identical electrical specifications (1kΩ ±2%, 200mW per element, ±100ppm/°C temperature coefficient) and are housed in the 6-SIP through-hole package with 6 pins. No circuit modifications are required.

Q: What is the difference between the Bourns 4606X and 4306X series?

A: The 4606X-AP1-102LF and 4306R-101-102LF are from different Bourns series (4600X and 4300R respectively) but maintain identical functional specifications for this 1kΩ 5-resistor network configuration. Series designation reflects internal product line organization and does not affect electrical performance or package compatibility.

Q: Is the Vishay Dale CSC06A011K00GEK electrically compatible?

A: Yes. The CSC06A011K00GEK maintains all critical electrical parameters: 1kΩ resistance, ±2% tolerance, 200mW power per element, ±100ppm/°C temperature coefficient, and -55°C to 125°C operating range. The 6-SIP package and pin configuration are identical.

Q: Does packaging format affect substitution eligibility?

A: No. Cut Tape, Tube, and Bulk packaging formats are supply chain variations only. They do not affect the electrical performance or mechanical fit of the 6-SIP component in through-hole PCB applications.

Q: Are all three parts ROHS3 compliant?

A: Yes. The 4606X-AP1-102LF, 4306R-101-102LF, and CSC06A011K00GEK are all ROHS3 compliant, confirming lead-free construction and regulatory compliance for restricted substance directives.